Steris V-PRO 60
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Steris V-PRO 60 Features
The Steris V-PRO 60 low temperature sterilizer is designed to provide reliable sterilization for heat- and moisture-sensitive medical devices. Using vaporized hydrogen peroxide (VHP) technology, the V-PRO 60 ensures effective sterilization while maintaining compatibility with a wide range of materials. This compact system offers three pre-programmed cycles—Lumen, Non-Lumen, and Flexible—to address diverse sterilization needs. Its automated processes, safety features, and rapid cycle times make it an efficient choice for modern healthcare facilities.
- Low Temperature Sterilization: Operates at low pressure and temperature, ideal for heat- and moisture-sensitive devices.
- VHP Technology: Utilizes VAPROX HC Sterilant to produce vaporized hydrogen peroxide for thorough sterilization.
- Three Pre-Programmed Cycles: Lumen Cycle: for devices with diffusion-restricted spaces; Flexible Cycle: for flexible endoscopes or bronchoscopes, Non-Lumen Cycle: for non-lumened rigid, semi-rigid, and flexible devices.
- Automated Processes: Fully automated sterilization cycle with condition, sterilize, and aeration phases for precision and reliability.
- Compact Design: Available in single-door counter or cart-mounted configurations to fit various facility layouts.
Steris V-PRO 60 Specifications
Dimensions and Weight
- Sterilizer Dimensions: 31” W x 31” L x 28” H (78.7 x 78.7 x 71.1 cm)
- Chamber Dimensions: 13” W x 28” L x 10” H (33.0 x 71.1 x 25.4 cm)
- Chamber Volume: 2.1 cubic feet (60 L)
- Weight: 120 Vac units: 255 lb (116 kg); 230 Vac units: 259 lb (117 kg)
Sterilization Cycles
- The V-PRO 60 Low Temperature Sterilization System offers three pre-programmed cycles, each tailored for specific sterilization needs:
- Lumen Cycle: Approximately 60 minutes, designed for devices with lumens or diffusion-restricted spaces.
- Non-Lumen Cycle: Approximately 28 minutes, for sterilizing non-lumened instruments.
- Flexible Cycle: Approximately 38 minutes, intended for one flexible endoscope or similar devices.
Condition Phases
Each cycle progresses through three phases: Condition, Sterilize, and Aeration.
- Condition Phase: During this phase, the sterilizer removes air and moisture from the chamber. The reservoir fills, and a vacuum pulse is applied. The load is tested for moisture content; if acceptable, the process advances. If moisture levels are too high, the pulse repeats until conditions are met.
- Sterilize Phase: This phase involves four pulses, each consisting of:
- Pulling a vacuum to the setpoint.
- Introducing vaporized VAPROX HC Sterilant into the chamber.
- Holding the vapor for a programmed time.
- Introducing filtered air to reach a setpoint, followed by another hold time.
- Finally, a deep vacuum is applied to complete the pulse.
- Aeration Phase: In the final phase, a vacuum removes remaining sterilant vapors, reducing their concentration within the chamber. Once completed, chamber pressure returns to normal, and the door unlocks, signaling the end of the cycle.
Display Controls and Printing
- Display Control Panel is centrally located on the front of the sterilization unit for user convenience. This 5.7-inch color touch screen, with a resolution of 640 x 480 pixels, provides clear information and easy navigation. The interface is intuitive, featuring color-coded screens to streamline operation and enhance usability.
- Printer is positioned on the front right side of the unit. It features an alphanumeric impact design and produces a clear, permanent record of each sterilization cycle. The printer uses 2.25-inch (5.7 cm) wide, 24-character tape, and includes a paper take-up for organized documentation. This system ensures accurate and accessible sterilization records for compliance and review.
Refurbished Steris V-PRO 60
Soma Tech Intl offers the Steris V-PRO 60 low-temperature sterilizer at prices up to 50% below OEM rates, providing the same service and warranty as a new unit. This Steris sterilizer undergoes both technical and cosmetic reconditioning to ensure it functions and appears as if it were new. During the refurbishment of the V-PRO 60, our in-house biomedical engineers, who are highly skilled and certified to work on low-temperature sterilizers, meticulously inspect and test the unit. If necessary, components are replaced to ensure that all aspects of the V-PRO 60 meet the original manufacturer’s engineering specifications. This guarantees that the device operates just as it did when it initially left the manufacturer.
Once the V-PRO 60 sterilizer is fully operational, it undergoes a detailed cosmetic restoration process. The Steris low-temperature sterilizer is thoroughly cleaned, minor scratches and dents are repaired, it is repainted, and new decals are applied if necessary. After this rigorous refurbishment process, the unit both functions and looks like new. Soma Tech Intl is ISO 13485 certified, ensuring that the highest quality standards are upheld for all capital medical equipment sold. Before the Steris V-PRO 60 is labeled as patient-ready and prepared for shipment, it undergoes a final quality control test to confirm that all aspects are functioning as they should.
Soma Tech Intl is actively seeking to purchase Steris V-PRO 60 low-temperature sterilizers. If you or your facility are looking to sell your V-PRO 60, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that will guide you through the entire process. Selling your used or pre-owned Steris equipment directly to Soma eliminates the middleman, ensuring your medical facility receives the highest value for your equipment. Soma is 100% HIPAA compliant, ensuring your equipment arrives at our facility in the same condition it left yours. Soma Tech Intl also offers trade-in credit for your medical equipment. If you have a Steris V-PRO 60 or other low-temperature sterilizers you would like to sell, send us a message.