ENGLISH 
Español
Pedigo P-2010-S
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
Pedigo P-2010-S Features
The Pedigo P-2010-S is a compact blanket warmer built to raise blanket temperatures for added patient comfort in surgical, recovery, and patient care areas. Constructed of 20-gauge stainless steel with a solid door, sturdy handle, and heavy-duty hinges, it’s built to hold up under frequent daily use. Inside, Pedigo’s patented Halo Heat low-heat-density electrothermal cable array runs through the floor and side walls of the cabinet, warming the interior evenly without a circulating fan or lint trap to maintain. A 4-digit LED control panel lets staff set and monitor cabinet temperature across a wide range, switchable between Fahrenheit and Celsius, while a separate warming shut-off system helps guard against overheating. With room for 5 to 7 blankets, the P-2010-S is a practical, space-saving choice for smaller departments or areas where a full-size warming cabinet isn’t needed.
- Halo Heat Warming: Low-density heating cable built into the floor and side walls delivers even, fan-free heat.
- Adjustable Temperature Range: Digital control adjusts from 98°F to 200°F (37°C to 94°C).
- 5-7 Blanket Capacity: A 2.3 cubic foot interior with one epoxy-coated blanket support assembly.
- Solid Stainless Steel Construction: 20-gauge stainless steel exterior and solid door with heavy-duty handle and hinges are built for heavy, everyday use.
- Built-In Overheat Protection: An independent warming shut-off system works alongside an audible alert to help prevent overheating.
Pedigo P-2010-S Specifications
Dimensions
- Height: 21.5 in (54.6 cm)
- Width: 16.5 in (41.9 cm)
- Depth: 25.25 in (64.1 cm)
Interior Dimensions
- Compartment: 2.3 cubic ft.; 14 x 13.25 x 21.25 in (HxWxD)
- Total Capacity: 5 – 7 blankets
Heating Controls
- Single compartment with electronic control
- Blanket Temp Range: 98°F – 200°F (37°C – 93°C)
- 4-digit L.E.D. display with programmable TIMER for automated start/stop
- Selectable Fahrenheit or Celsius display
- Power-fail memory retains temperature setting and programming
- No fans or lint traps
Safety Features
- WarmSafe Technology
- Warming shut-off system, separate from the electronic control, prevents overheating
- Built-in speaker for audible alarm feedback (selectable on/off)
- Safety-coated, fully insulated interior
Construction
- 20-gauge stainless steel exterior casing and door
- Solid door (no window)
- Heavy-duty door handle and hinges
- Epoxy-coated blanket support assembly (bottom and sides)
- Four 1-1/4 in (31mm) non-skid rubber feet standard; casters available as an option
Electrical Requirements
- 120 VAC, 50/60 Hz, 1 Phase
- 600 Watts, 5.5 Amps
- NEMA 5-15P plug, Hospital Grade
- Safety Class I Equipment
Refurbished Pedigo P-2010-S
Soma Tech Intl offers the Pedigo P-2010-S Blanket Warmer up to 50% below OEM prices, with the same service and warranty as new equipment. This unit goes through both technical and cosmetic refurbishment so it performs and looks like new. During the refurbishment of the P-2010-S, our in-house biomedical engineers, who are trained and certified to work on blanket warmers, carefully inspect and test the cabinet and replace components as needed so every aspect of the unit meets the original manufacturer’s engineering specifications. Once it’s fully operational, the P-2010-S moves into a detailed cosmetic restoration process: thorough cleaning, correction of minor scratches and dents, surface refinishing where needed, and decal replacement if required. After all of that, it functions and presents like new.
Soma Tech Intl is ISO 13485:2016 certified, so strict quality control standards apply to every piece of capital medical equipment we sell. Before the Pedigo P-2010-S is labeled patient-ready and prepared for shipment, it goes through a final quality assurance inspection to confirm proper operation and performance.
Soma Tech Intl’s procurement team is also always looking to purchase Pedigo blanket warmers and other used Pedigo equipment. If your facility has a P-2010-S or similar model to sell, get in touch and our purchasing department will walk you through the process from start to finish. Selling directly to Soma cuts out the middleman, so your facility gets the best possible value for its used or pre-owned equipment. We’re 100% HIPAA compliant as well, meaning your equipment arrives at our facility in the same condition it left yours. Soma also offers trade-in credit, so if you have a P-2010-S or any other used medical equipment to sell, just send us a message.
