Ziehm Vision²

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Ziehm Vision² Features

The Zeihm Vision 2 is a compact C-arm that comes with an intuitive touchscreen interface. The Monitor Cart comes with two 19-inch flatscreen monitors. Ziehm Vision 2 offers High-Quality imaging with low doses of exposure and a small footprint. The C-arm uses CCD cameras that can detect 4,000 shades of gray, which results in high-resolution, clear images. With its small footprint, it is ideal for an operating room with a wide range of clinical applications including general surgery, and Orthopedics.

  • 18” TFT monitors provide bright, high-contrast images with a wide viewing angle.
  • Intuitive workflow with synchronized TFT touchscreens on the c-arm and monitor cart.
  • High-resolution thanks to a dynamic CCD camera with 1 k × 1 k technology.
  • Easy integration into existing networks (with WLAN option).
  • Active Cooling for continuous performance during lengthy, demanding procedures.
  • Counter-balanced c-arm for simplified positioning.


Ziehm Vision² Specifications

C-Arm Mobile Stand

Dimensions and Mechanics

  • Motor-driven vertical travel: 17” [43 cm]
  • Motor-driven horizontal travel: 9” [22 cm]
  • Motor-driven orbital rotation: -90° / +45°
  • Angulation: ± 225°
  • Swiveling (panning): ± 10°
  • Focus-image receptor distance: 40” [111 cm]
  • C-arm vertical free space: 35” [89.5 cm]
  • C-arm depth: 27” [68 cm]
  • Width: 32″ [80 cm]
  • Length: 63-72” [160-182 cm]
  • Height: 62-79” [157.5-200.5 cm]
  • Brakes: Patented steering & braking lever, with parallel movement of the mobile stand in all directions

X-Ray Generator

  • X-ray tube: stationary anode
  • Single focus: 0.6 (IEC 336)
  • Max. anode heat content: 45 kHU / 34 kJ
  • Max. anode heat dissipation: 600 W
  • Generator type:
    • monoblock
    • 20 kHz high frequency
    • microprocessor-controlled
  • Operating Values:
    • Nominal output (100 kV): 2,000 W
    • Maximum output: 2,200 W
    • Pulsed fluoroscopy:
      • kV range: 40-110 kV
      • mA range: 0.2-20 mA
      • pulse width: 10-24 ms
      • pulse rate: 1, 2, 4, 8, 12.5, 25 pulses/s
    • Digital radiography (snapshot):
      • kV range: 40 -110 kV
      • mA: up to 20 mA
    • Filtering:
      • Total filtering: = 4 mm Al equivalent
  • Output
    • Pulsed fluoroscopy: up to 20 mA
    • Digital radiography: up to 20 mA
    • Tube housing heat capacity:
      • powered by an integrated Advanced Active Cooling and heat management system
      • 5 million HU system heat capacity
      • 400 W continuous heat dissipation in clinical performance
  • Collimator System
    • Dedicated pre-collimator for FPD
    • Collimator rotation: ± 90°
    • Iris collimator: 2-8” [50-198 mm] diameter
    • Slot collimator: 2-8” [50-198 mm] diameter
    • Virtual collimation without radiation

Flat-Panel Detector System (only on FD Model)

  • Type: amorphous silicon photodiode TFT technology
  • Scintillator: cesium iodide
  • Field size: 8 x 8” [19.8 x19.8 cm]
  • Detector matrix: 1024 x 1024 pixels; 194 µm pixel size
  • Dynamic range: 72 dB
  • System resolution: 2.4 lp/mm
  • Anti-scatter grid: 70 lines/cm; grid ratio 8:1
  • A laser positioning device integrated into the detector housing

User Interface

  • TFT touchscreens on C-arm stand and monitor cart: synchronized; intuitive icons for easy use; resolution: 640 x 480 pixels; multi-lingual user interface

Monitor Cart


  • High-resolution and high-brightness twin flat-screen monitors: screen size: 18.1“ (46 cm); native resolution: 1280 x 1024 pixels; viewing angle (horizontal & vertical): 170°; contrast ratio: 600:1; dimensions: 16 x 13 x 3” [41 x 34 x 7 cm]

3D Workstation (for Ziehm Vision2 FD Vario 3D Only)

  • Hardware:
    • Intel Core 2
    • 2048 MB DDRAM
    • USB, CD / DVD (option)
    • Mouse
  • Software:
    • Control software for variable isocentric movement
    • 3D Visualization
    • Slice planes: axial, saggital, coronal
    • 3D reconstruction algorithm FBP
    • 3D volume size: 5 x 5 x 5” [128 x 128 x 128 mm]
    • Resolution: 2563 voxel, 5123 voxel
    • Thick slice filter function
    • Iso loop
    • Measurement function: length, angle
    • Zoom function
    • Parallel slices function

Digital Image Processing

  • Real-Time Processing Functions:
    • Recursive filter: 4 levels (out of 16)
    • Stack filter (‘Last Image Hold’): 5 levels
    • Edge enhancement filter: 5 levels
    • Windowing and step windowing
    • Digital image rotation and reversal without radiation
    • Grayscale inversion
    • Digital shutters
  • Application-Oriented Anatomical Programs:
    • Bone, Heart, Abdomen
    • Soft, Large Patient
  • Object Detected Dose Control (ODDC):
    • Automatic motion detection/li>
    • Automatic metal correction
  • Image Acquisition:
    • Autosave
    • Cine loop with auto-playback (option): sequential image storage and display: 1, 2, 4, 8, 12.5, 25 frames/s; start, stop and replay rate controls
  • DSA Package (Option):
    • DSA real-time subtraction with re-masking capability
    • MSA maximum opacification sequence
    • RSA road mapping
    • Pixel shift/landmarking
    • Digital measurement functions (distance/angle)
  • Postprocessing Functions:
    • Edge enhancement: 5 levels
    • Zoom: 3 levels
    • Image rotation
    • Windowing
    • Grayscale inversion
    • Image cropping (digital shutters)
  • Digital Memory:
    • Storage capacity: up to 55,000 images; 400 scans ( 2563 voxel volume); 200 scans ( 5123 voxel volume)
    • Memory matrix: 1024 x 1024 pixels
    • Image matrix: 1024 x 1024 pixels
    • Digital image processing: up to 32-bit; 14-bit A/D converter
    • Grayscale: 1024 shades of gray (10 bit)
  • Data Organization:
    • Patient-based data management with 16-image mosaic display
    • Pre-registration via DICOM Worklist
    • Manual input or emergency registration
    • Air Kerma Dose Display
    • Air Kerma value tagged to the stored image

Refurbished The Ziehm Vision 2 C-arm

Soma Tech Intl offers the Ziehm Vision 2 C-arms up to 50% below OEM prices with the same service and warranty as new. The Ziehm Vision 2 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Ziehm Vision 2, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on C-arms. If necessary, parts are replaced to make sure that all aspects of the Ziehm Vision 2 are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Ziehm Vision 2 is working like new it undergoes a special cosmetic restoration process. The Ziehm Vision 2 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Ziehm Vision 2 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Ziehm Vision 2 C-Arms contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase a Ziehm Vision 2 If you or your facility is looking to sell your Ziehm Vision 2, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Ziehm Vision 2 takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!


Questions about our C-arms?

Soma Tech Intl offers a wide range of C-Arms. If you have any questions about any of our C-arm machines or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your C-arms? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us