Conmed Sabre 180

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Conmed Sabre 180 Features

The ConMed Sabre 180 is a medium-powered generator that delivers impressive electrosurgical performance in all modes including monopolar cut and coag and bipolar coag. Additionally, the ConMed Sabre is equipped with ARM Contact Quality, the most sensitive pad monitoring system available. The Sabre 180 is ideal for use in surgery centers and office clinics during minor, general, and laparoscopic procedures.

  • Digital Knob Power Controls
  • Last Used settings on Power Up
  • Aspen Return Monitor provides an extra margin of safety against possible patient burns at the return site
  • The Resistance Indicator displays the resistance of the patient measured between the conductive contacts of the return electrode
  • Isolated Output Circuitry minimizes the probability of alternate ground site burns
  • Only one output is active at a time for t
  • The maximum patient and operator safety
  • Power Adjustable While Activated
  • Versatile, Effective Monopolar Cutting
  • Circuit Redundancy
  • Microprocessor Control
  • Fulguration/Coagulation
  • Improved Bipolar
  • Simplified Controls
  • Rugged, high-efficiency circuitry
  • Circuit Protection
  • Mounting Flexibility

Conmed Sabre 180 ESU Applications

  • Head and Neck Surgery
  • Cardiac Cath Labs
  • Laparoscopy Carts
  • Minor Surgery Centers
  • Endoscopy
  • Interventional Radiology
  • Physician Offices

Conmed Sabre 180 Specifications

Dimensions

  • Height: 6in (153mm)
  • Width: 12 in (305 mm)
  • Depth: 16 in ( 407mm)
  • Weight: 20 lbs. (9.1 kg)

Alarms

  • Return Electrode: 1000 Hz, > 65 dbA
    • Single Foil acceptance: 0-10 ohms nominal
    • Dual Foil acceptance: 10-150 ohms nominal
    • Dual Foil alarm threshold: monitor set resistance +20% nominal
  • Control error: 1710 Hz pulsating, 40-65 dbA
  • Machine fault: 1000 Hz, 65 dbA continuous

Output Accuracy

  • Setting: +/- 10%, +/- 5W to rated load @ rated mains.
  • Mains: < 5% over mains voltage range.
  • Power Decrease: < 5%, 50W output, 20 sec

Output Adjustment

  • Settings: by digital knob from 0 to maximum in 1-watt steps.
  • Display: seven-segment digital display of watts to rated load resolved to 1 watt.

General

  • 100 Watt Power Digital ESU w/Footswitch
  • A.R.M. (Aspen Return Monitor)
  • Monopolar Pure Cut: 100 Watts
  • Cut Blend 1: 65 Watts
  • Cut Blend 2: 50 Watts
  • Coag: 80 Watts
  • Bipolar Coag: 50 Watts
  • Input volts: 110

Refurbished ConMed Sabre 180 Electrosurgical Unit

Soma Tech Intl offers Refurbished Conmed Sabre 180 electrosurgical units up to 50% below OEM prices with the same service and warranty as new. The Conmed Sabre Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Sabre 180 ESU it’s carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on electrosurgical systems. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the system is working the same way that it originally left the manufacturer. After the ConMed unit is working like new it undergoes a special cosmetic restoration process. The ConMed 180 ESU is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the ESU functions and looks like new. Soma Tech is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the ConMed Sabre 180 system is labelled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Conmed Sabre 180 electrosurgical unit, contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Conmed Sabre 180 electrosurgical units. If you or your facility is looking to sell your ConMed Sabre 180, be sure to contact Soma Tech. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned ConMed Sabre Electrosurgical System to Soma Tech takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Tech’s purchasing department at [email protected] or send us a message on our Sell to Soma website.

Banner

Questions about our Electrosurgical Units?

Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your electrosurgical units? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us