ERBE VIO 200D

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

ERBE VIO 200D Features

With the VIO electrosurgical system, Erbe has set innovative standards aimed at providing optimum surgical support for almost any discipline as well as including a range of additional indications. The Erbe VIO 200D generator offers automatic power adjustment for all control technologies.

  • Automatical dosage of power.
  • New and improved CUT and COAG functions.
  • Modular software and hardware.
  • Widest choice of socket modules and functions.
  • ReMode – new activation via „remote control“ straight from the sterile field.
  • The VIO 200 D – the master control unit for other modules of the VIO electrosurgical system, e.g. the APC 2.

ERBE Vio 200 D Specifications

Dimensions

  • Width: 16.14 in (410 mm)
  • Height:6.5in (165mm)
  • Depth: 14.96in (380mm)
  • Weight: 9.5kg (20.94)

Operating Mode

  • Intermittent Operation: ON time 25% (e.g. activated for 10 sec. / deactivated for 30 sec.)

Ambient conditions for transport and storage of unit

  • Temperature: -40 °C to +70 °C
  • Relative Humidity: 10 % – 95 %

Ambient conditions for operating the unit

  • Temperature: +10°C to +40°C
  • Relative Humidity: 15% – 80%, non-condensing

Power Output

  • Maximum cut power: 200 watts at 500 Ohm
  • Maximum COAG power: up to 200 watts
  • NE safety system: NESSY
  • Frequency: 350 kHz

Power Connection

  • Line voltage 100 V – 120 V / 220 V – 240 V ± 10 %
  • Power frequency 50 / 60 Hz
  • Line current max. 8 A / 4 A
  • Power consumption in standby mode 40 watts
  • Power consumption at max. HF power 500 watts / 920 VA
  • Potential equalization connection Yes
  • Power fuse T 8 A / T 4 A

 

Refurbished ERBE VIO 200 D Electrosurgical Unit

Soma Technology, Inc. offers Refurbished ERBE VIO 200 D Electrosurgical unit Systems up to 50% below OEM prices with the same service and warranty as new. The ERBE VIO 200 D Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the ERBE VIO 200 D system is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on the ERBE VIO 200 D Electrosurgical Unit. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the ERBE system is working like new it undergoes a special cosmetic restoration process. The ERBE VIO 200 D Electrosurgical Unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the ERBE VIO 200 D is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished ERBE System contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Technology, Inc. is also actively looking to purchase an ERBE VIO200 D Electrosurgical Unit System. If you or your facility is looking to sell your ERBE VIO 200 D, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned ERBE VIO 200 D Electrosurgical Unit System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.

 

Banner

Questions about our Electrosurgical Units?

Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your electrosurgical units? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us