ENGLISH 
Español
3M Bair Hugger Ranger Model 247
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
3M Bair Hugger Ranger Model 247 Features
The 3M Bair Hugger Ranger Model 247 irrigation fluid warmer is designed to warm irrigation fluids quickly and maintain consistent delivery temperatures during surgical procedures. Built for operating room use, the system heats fluids in real time as they flow to the patient, eliminating the temperature drop that can occur with cabinet-warmed solutions. The unit reaches its set temperature in under two minutes and maintains controlled output temperatures within a clinically appropriate range. Designed for steady performance across varying flow rates, it supports both intraoperative and post-procedure irrigation needs. Compact and lightweight, the Ranger Model 247 is easy to position on an IV pole and integrates smoothly into busy surgical environments.
- Rapid Warm-Up Time: Reaches the 41°C set point in less than two minutes.
- Controlled Output Temperature: Maintains fluid temperatures between 33°C and 41°C at flow rates from 0 to 867 mL/min.
- Built-In Safety Alarms: Over-temperature protection activates at 48°C (primary) and 50°C (secondary).
- Dry Heat Technology: Uses dry heat warming rather than a water bath system, reducing maintenance and simplifying cleaning.
- Single-Use Sterile Disposable Sets: Designed specifically for the Model 247 system; sterile, latex-free.
3M Bair Hugger Ranger Model 247
Dimensions
- Height: 4.5 in (11 cm)
- Width: 7.5 in (19 cm)
- Depth: 10 in (25 cm)
- Weight: 7.4 lb (3.4 kg)
Temperature
- Set Point Temperature: 41°C
- Over-temperature Alarm: 48°C
- Under-temperature Alarm: 33°C
- Over-temperature Cutoff: 50°C
Ranger Irrigation Fluid Warming Disposable Set
- Model: 24750 Irrigation Set
- Flow Rate: 0-867 mL/min2
- Priming Volume: 308 mL
- Patient Line Length: 213 cm
Refurbished 3M Bair Hugger Ranger Model 247
Soma Tech Intl offers the 3M Bair Hugger Ranger Model 247 Irrigation Fluid Warmer at prices up to 50% below OEM levels, while providing the same service and warranty as new. This 3M Ranger 247 irrigation warmer is refurbished both technically and cosmetically to ensure dependable performance and a like-new appearance. During the refurbishment of the Ranger Model 247, our in-house biomedical engineers, who are trained and certified to work on fluid and irrigation warming systems, perform a complete inspection and functional evaluation. Any components that do not meet the original manufacturer’s engineering specifications are replaced to ensure the Bair Hugger Ranger 247 delivers consistent and accurate warming during procedures.
Once the Ranger irrigation fluid warmer is fully operational, it undergoes a detailed cosmetic restoration process. The unit is thoroughly cleaned, minor scratches and signs of wear are repaired, surfaces are refinished as needed, and decals are replaced when applicable. After refurbishment, the 3M Bair Hugger Ranger Model 247 both functions and looks like new. Soma Tech Intl is ISO 13485 certified and maintains strict quality standards across all refurbished capital medical equipment. Before the Ranger 247 is labeled patient-ready and prepared for shipment, it completes a final quality control inspection to confirm proper operation and safety performance.
Soma Tech Intl is also actively seeking to purchase 3M Bair Hugger Ranger Model 247 irrigation fluid warmers. If your facility has a Ranger 247 or other Bair Hugger fluid warming systems available for sale, Soma’s experienced purchasing department will guide you through the entire process. Selling your used or pre-owned 3M equipment directly to Soma eliminates the middleman and helps ensure your facility receives maximum value. Soma is 100% HIPAA compliant and guarantees your equipment arrives at our facility in the same condition it left yours. Trade-in credit is also available. If you have a Ranger Model 247 or other irrigation fluid warmers you would like to sell, contact Soma Tech Intl today.
