GE Ohmeda Care Plus 4000

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

GE Ohmeda Care Plus 4000 Features

The GE Ohmeda Care Plus 4000 and its family of incubators deliver superior thermoregulation with an integrated microprocessor-based controller. It features an optional active double wall construction which helps create a precise and consistent environment for the neonate. The Plus 4000 also meets all the practical clinical needs of the healthcare provider including access to the infant.

  • Dovetail Rail system
  • Standard Humidifier for variable control of humidity
  • Care Plus 3000: Three-position tilt for easy, precise adjustment to 0º,3º, and 6º at either end of the bed
  • Care Plus 4000: Continuous Tilt allows smooth, unlimited adjustment from 0º to 12º

GE Ohmeda Care Plus 4000 Specifications

Dimensions

Incubator with Elevating Base:

  • Height: Overall height 54 to 62 inches (136.2 to 157.5 cm)
  • Elevating base adjustable from 35 to 43 inches (88.9 to 109.2 cm) mattress to floor
  • Depth: 71.1 cm/28 in
  • Width: 83.8 cm/33 in
  • Weight: 89 kg/195 lb

Incubator with Elevating Base:

  • Height: Overall height 54 to 62 inches (136.2 to 157.5 cm)
  • Elevating base adjustable from 35 to 43 inches (88.9 to 109.2 cm) mattress to floor
  • Depth: 71.1 cm/28 in
  • Width: 83.8 cm/33 in
  • Weight: 89 kg/195 lb

Drawer Packages for Elevating Base or Stationary Pedestal:

  • Overall: 28 x 29 x 46 cm/11 x 11.5 x 18.25 in
  • Single deep drawer: 25 x 23 x 42 cm/10 x 9 x 16.5 in
  • Dual drawer: 11 x 23 x 42 cm/4.5 x 9 x 16.5 in

Incubator with Cabinet:

  • Height: 141 cm/55 in
  • Depth: 64.6 cm/25.5 in
  • Width: 88.9 cm/35 in
  • Weight: 84 kg/185 lb

Incubator Characteristics:

  • Casters: 5-inch diameter, 2 locking, 2 non-locking
  • Mattress: 34.8 x 65 cm/13.7 x 25.6 in
  • Mattress to Hood: 16 in/41 cm
  • Door Height: 11 in/28 cm
  • Tilt: 0°, 3° and 6° (CP 3000)
  • Positions: Continuous from 0° to 12° (CP 4000)
  • Port holes: 6
  • Tubing ports: 6

Electrical Power Requirements

  • 120 Vac 60Hz
  • Models: 115 V ±10% 5.7 amps
  • Conforms to IEC 601.1, UL 544, and CSA 22.2 No. 125 requirements
  • Nominal power consumption: 450 watts at maximum heater output
  • Line voltage compensation: Input voltage is monitored and the heat output is adjusted to compensate for line voltage variations
  • Leakage currents: Less than 100 microamps on 120V units
  • Leakage at patient probe: Less than 50 microamps on 120V unit

Operation Environment

  • Operating temperature range: 20° to 30°C/68° to 86°F
  • Storage temperature range: -25° to 60°C/13° to 140°F
  • Operating humidity range: 0 to 90%

System Control Characteristics

  • Microprocessor-based control system: Self-test functions are performed at power-up and during normal operation
  • Patient Control (Servo) Mode: 35° to 37°C/95° to 98.6°F
  • Air Control (Manual) Mode: 20° to 37°C/73.4° to 98.6°F
  • Up to 39°C/102.2°F with control panel override switch
  • Air Velocity: Average <10 cm/sec with the inner wall
  • Temperature variability: Less than ±0.3°C
  • Resolution: ±0.1°C or 0°F
  • Probe interchangeability: ±0.1°C/0.2°F
  • Average oxygen input concentration range:
    • 5 L/min 25 to 45%
    • 10 L/min 35 to 65%
    • 15 L/min 45 to 70%
  • Humidification: Standard – 10 to 75% depending on nursery environment and incubator temperature setting
  • Servo – 40
Banner

Questions about our NICU Incubators?

Soma Tech Intl offers a wide range of NICU incubators. If you have any questions about any of our NICU incubators or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your NICU incubators? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us