GE Dash 4000

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

GE Dash 4000 Features


The GE Dash 4000 is a portable patient monitor. The Dash 4000 can provide readings for a variety of parameters, some of these include EKG/ECG, NIBP, and Sp O2. The patient monitor has a 10.4-inch color screen, making it easy to see the patient’s information from a distance. The GE patient monitor can be connected to the facility’s GE Carescape network for easy data transfer from one machine to another through a wired or wireless connection. While the Dash Monitor can provide 12-lead ECG/EKG reading it can also provide EK-Pro arhythmia, St-Segment analysis, and A-fib Detection. GE offers a variety of patient monitors. The GE Dash lpatient monitors includes the GE Dash 5000.

  • Unmatched adaptability at the bedside.
  • Modular flexibility
  • Revolutionary chest pain care
  • Early intervention in the NICU
  • Gold standard NIBP accuracy
  • Options: Agent Monitoring


GE Dash 4000 Specifications



  • Height: 10.7 in (27.4 cm.)
  • Depth: 9.5 in (24.3 cm.)
  • Width: 11.5 in (29.3 cm.)
  • Weight: 5.7 kg


  • Size: 26 cm (diagonal).
  • Type: active-matrix color TFT.
  • Resolution: 640 by 480 pixels.
  • Number of traces: 6 maximum.
  • Number of seconds/trace: 4.9 at 25 mm/sec.
  • Sweep speed: 6.25, 12.5, 25 mm/sec (with erase bar).
  • Information window: displays non-real-time information without obstructing the display of real-time information.
  • Display organization: prioritized by parameter.


  • Trim Knob® control.
  • Five hard keys: silence alarm, graph go/stop, function (zero all), and power on/off.


  • Categories: patient status and system status.
  • Priority: 4 levels – crisis, warning, advisory, and message.
  • Notification: audible and visual.
  • Setting: default and individual.
  • Silencing: 1 minute, current alarm only.
  • Pause: 5 minutes in adult ICU mode, 3 minutes in neonatal ICU mode, and 5,15, or permanent pause in OR mode.
  • Volume: default 70%, 70 dB measured at 1 meter.


  • Standard leads available: I, II, III, V, aVR, aVL, and aVF. 10
  • lead wire cable: I, II, III, V, aVR, aVF, V2, V3, V4, V5, V6.
  • Leads analyzed simultaneously: I, II, III, and V (multi-lead mode).
  • Lead fail: identifies failed lead.
  • Alarms: user-selectable upper and lower heart rate limits.

Input Specifications

  • Voltage range: ±0.5 mV to ±5 mV.
  • Signal width: 40 ms to 120 ms (Q to S).
  • Heart rate range: 30 to 300 bpm.
  • Input impedance: common mode > 10 Mat 50/60 Hz, differential > 2.5 Mfrom dc to 60 Hz.
  • Common mode rejection: 90 dB minimum at 50 or 60 Hz


  • Measurement technique: impedance variation detection.
  • Range respiration rate: 0 – 200 breaths per minute.
  • Base impedance: 100 – 1000 Oat 52.6 kHz.
  • Detection sensitivity: 0.4 to 10 Ovariation.
  • Waveform display bandwidth: 0.1 to 1.8 Hz (-3 dB).
  • Alarms: user-selectable upper and lower respiration limits, and user-selectable apnea limit.


  • Number of channels: 2.
  • Input specifications – probe type: YSI series 400 or 700,
  • temperature range: 0°C to 45°C (32°F to 113°F),
  • resolution: ±0.1°C.
  • Output specifications – parameters displayed: T1, T2,
  • accuracy: ±0.1°C for YSI series 4000 probes, ±0.3°C for YSI series 7000 probes, independent of source.
  • Alarms: user-selectable upper and lower limits for T1 and T2.

Invasive Blood Pressure

  • Number of channels: 2 (optional).
  • Transducer sites: arterial, femoral artery, pulmonary arterial, central venous, right atrial, left atrial, intracranial, and special.
  • Transducer requirements: 5 Vdc±0.1% excitation voltage.
  • Transducer output: 5 µV/V/mmHg. Input specifications – range: -25 mmHg to 300 mmHg, offset: ±150 mmHg.
  • Output specifications – frequency response: dc to 50 Hz (-0/+2 Hz).
  • Zero balance range: ±150mmHg.
  • Zero balance accuracy: ±1mmHg.
  • Zero balance drift: ±1mmHg over 24 hours.
  • Accuracy: ±2% or ±1mmHg, whichever is greater.
  • Alarms: user- selectable upper and lower limits for systolic, diastolic, and mean pressures.


  • Measurement technique: oscillometric.
  • Displayed parameters; systolic, diastolic, and mean pressures.
  • Systolic: 30-275 mmHg adult, 30-235 mmHg pediatric, and 30-135 mmHg neonate.
  • Diastolic: 10-220 mmHg adult, 10-220 mmHg pediatric, and 10-110 mmHg neonate.
  • MAP: 20-260 mmHg adult, 20-260 mmHg pediatric, and 20-125 mmHg neonate.
  • Pulse rate, as displayed in tabular trends: 30-200 bpm adult, 30-200 bpm pediatric, and 30-200 bpm neonate

Pulse Oximetry

  • Parameters monitored: arterial oxygen saturation (SpO2) and peripheral pulse rate (PPR).
  • SpO2range: 50 –100%. PPR range: 30-300 beats per minute.
  • SpO2 accuracy: ±2% (70-100%) and ±3% (50- 69%).
  • PPR accuracy: ±3 beats per minute.
  • Alarms: user-selectable upper and lower limits for SpO2 and PPR.


  • Information displayed: inspired and expired CO2 concentrations in %, mmHg, or kPa, respiratory rate, and continuous CO2 waveform.
  • Measurement ranges: PiCO2/FiCO2: 0 to 100 mmHg/0to13%. Pe CO2/ Fe CO2: 0 to 100 mmHg/0 to 13%;
  • RR: 0 to 120 breaths/min.
  • Accuracy: CO2: 5% of reading or ±2 mmHg, whichever is greater.
  • Display resolution: 1 mmHg. Rise time: less than 60 msec.
  • Respiration rate accuracy: ± breath/min


More information on the Ge Dash 4000 Monitor

A Monitor for every Setting.

The Dash family of monitors provides flexibility in a single platform. With a comprehensive set of clinical parameters, Dash monitors capture vital patient measurements while sophisticated algorithms help prevent false alarms. Dash monitors are highly configurable, enabling you to add features and parameters accommodating varying acuity levels for patients across the care continuum. From presentation in the Emergency Department to surgery in the OR to recovery in the PACU, treatment in the ICU and transfer to the Stepdown unit, the Dash monitor is an excellent choice for every point of care.

A Dash of Clinical Excellence

The Dash 3000, 4000, and 5000 monitors incorporate innovative data acquisition and analysis programs that help prevent false alarms and help you accurately identify, diagnose and treat monitored patients with speed and precision.

Dash monitors are available with a comprehensive set of advanced parameters that can be adapted to virtually any care setting.

  • GE EK-Pro arrhythmia program uses simultaneous multi-lead ECG analysis across four leads to accurately detect arrhythmias.
  • Innovative InetlliRate* algorithm helps reduce false alarms by evaluating key data from multiple parameters before triggering an alarm.
  • GE DINAMAP* blood pressure algorithms support speed, comfort and artifact rejection while retaining a high standard of accuracy
  • GE-exclusive atrial fibrillation detection algorithm provides alarmand time-based trending to indicate the state of atrial fibrillation.
  • Up to four invasive blood pressure readings with a Smart BP artifact rejection program help reduce false alarms.
  • Proprietary TruTrak+* SpO2 motion algorithm identifies, quantifies and corrects clinical patient motion.

Refurbished Ge Dash 4000 Patient Monitor

Soma Tech Intl offers Refurbished Ge Dash 4000 patient Monitor up to 50% below OEM prices with the same service and warranty as new. The GE Patient Monitor is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the GE
Dash system is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on patient Monitors
. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Dash 4000 system is working like new it undergoes a special cosmetic restoration process. The patient monitor is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Tech is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the monitor is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Ge Dash 4000 Patient Monitor
contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a GE Dash 4000
If you or your facility is looking to sell your GE, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Ge Dash 4000 patient Monitor to Soma Tech takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our </a href=”” target=”_blank”>Sell to Soma website.

Questions about our patient monitors?

Soma Technology, Inc offers a wide range of patient monitors
. If you have any questions about any of our patient monitors or need a quick quote, call 1-800-GET-SOMA and one of our
knowledgeable sales representatives
will help you.


Questions about our Patient Monitors?

Soma Tech Intl offers a wide range of patient monitors. If you have any questions about any of our patient monitors or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your patient monitors? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us