Philips Expression MR200

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Philips Expression MR200 Features

The Expression MR200 Patient Monitoring System is designed to assist clinicians in monitoring patient vital signs in the dynamic magnetic resonance environment. The Expression MR200 combines wireless communication, radio frequency shielding, and digital signal processing to address the challenges associated with patient monitoring in the MR environment.

The Expression MR200 consists of these primary components:

  • Traditional Roll-Around Cart
  • Wireless ECG (wECG) module
  • Wireless SpO2 (wSpO2) module
  • Integral color LCD display for patient information
  • Intuitive graphical user interface
  • Colored waves and large numerics
  • Portable 8-hour battery
  • Simultaneous display of up to five parameters, four waveforms, and associated values
  • Visual and audible alarm signals, pulse tones, and system status messages
  • Gating, both digital pulse and analog waveform
  • Expression Information Portal (IP5), (optional)
  • Wireless remote printing to IP5 (optional)
  • Wireless gating (with Invivo wireless-equipped MRI systems

Philips Expression MR200 Specifications


  • Cart: 54.22 inches (137.71 cm)
  • Wireless ECG module: 4.7 inches (11.9 cm)
  • Wireless SpO2 module: 5.5 inches (13.9 cm)


  • Cart: 22.15 inches (56.26 cm)
  • Wireless ECG module: 2.5 inches (6.4 cm)
  • Wireless SpO2 module: 2.5 inches (6.4 cm)


  • Cart: 25.25 inches (64.14 cm)
  • Wireless ECG module: 0.91 inches (2.3 cm)
  • Wireless SpO2 module: 0.91 inches (2.3 cm)


  • Cart: 74.06 pounds (33.59 kg)
  • Wireless ECG module: 5.4 ounces (158.8 g)
  • Wireless SpO2 module: 5.4 ounces (158.8 g)

Power Requirements

  • Operating voltage range: 100 – 240 VAC
  • Frequency range: 47 – 63 Hz
  • Current: 1.5 A @ 115 VAC / 0.7 A @ 240 VAC
  • Power consumption, maximum: = 65 Watts


  • Battery Type Cart: Lithium-Ion
  • Module: Lithium polymer
  • Battery Operation Time 8 hours
  • Battery Capacity Cart: 75 Wh
  • Module: 3.1 Wh


  • Operating temperature range: 10 – 35°C (50 –95°F)
  • Relative humidity range: 15 – 80 percent, non-condensing
  • Storage and transport temperature range:
    • Batteries: 0 – 40°C (32 – 104°F)
    • Cart: -20 – 50°C (-4 – 122°F)
    • Wireless modules: -25 – 75°C (-13 – 167°F)
    • Accessories: -20 – 60°C (-4 – 140°F)
  • Altitude range: From sea level up to 10,000 feet (3048 m) or 708 mbar
  • Storage and transport pressure range: 708 –1020 mbar


  • 12.1” (30.7 cm) Integral color LCD
  • 800 x 600 pixels, color
  • Sweep speed: for ECG and SpO2, a speed of 25 mm/second gives 9.2 seconds of display time, while 50mm/second gives 4.6 seconds for respiration, a speed of 0.33, 1.56, 3.13, 6.25, 12.5 or 25 mm/second in used.
  • waveform display height: = 19 mm
  • “Full Screen” Display Height: = 75 mm

MR Compatibility

  • 1,500 Gauss
  • 4 W/kg SAR
  • 3T

Refurbished Philips Expression MR200 Patient Monitor

Soma Tech Intl offers the Philips Expression MR200 up to 50% below OEM prices with the same service and warranty as new. The Philips Expression MR200 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Philips Expression MR200 system, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on patient monitors. If necessary, parts are replaced to make sure that all aspects of the Philips Expression MR200 are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Philips Expression MR200 patient monitor is working like new it undergoes a special cosmetic restoration process. The Philips Expression MR200 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Philips Expression MR200 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Philips Expression MR200 patient monitors contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase a Philips Expression MR200 system. If you or your facility is looking to sell your Philips Expression MR200, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Philips Expression MR200 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.


Questions about our Patient Monitors?

Soma Tech Intl offers a wide range of patient monitors. If you have any questions about any of our patient monitors or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your patient monitors? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us