ENGLISH 
Español
Medtronic Covidien Nellcor PM1000N Bedside Respiratory Patient Monitor
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
Medtronic Covidien Nellcor PM1000N Features
The Medtronic Covidien Nellcor PM1000N is a bedside Respiratory Patient Monitoring system that offers pulse oximetry monitoring and cardiac-based technology. The PM1000N continuously monitors SpO2 and pulse rate in adult, pediatric, and neonatal patients. The monitoring system comes with a versatile, easy-to-use interface and touchscreen.
- Modular software, expandable parameters, and easy upgrades.
- State-of-the-art, lightweight, and versatile design.
- Multiple connectivity options.
- Nellcor respiration rate technology delivers Oxygen saturation (SpO2), Pulse Rate, and respiration rate through a single-finger sensor.
- Motion-tolerant pulse oximeter.
- Event markers for enhanced and fast documentation.
Medtronic Covidien Nellcor PM1000N Specifications
Dimensions
- Height: 6.5” (16.5 cm)
- Width: 10” (25.4 cm)
- Depth: 5” (12.7 cm)
- Weight: 7.5 lbs (3.4 kg)
Battery
- Type: Lithium-ion
- Battery Capacity: 6 hours under nominal load conditions
- Voltage: 7.2 Volts DC, 11.6 Ah, 83 Wh
- Recharge Time: 8 hours with the monitoring system turned off and 12 hours with the monitoring system turned on
- Shelf Life: Four months, if the monitoring system runs on a new, fully-charged battery; After four months of storage, units run 33% of the stated battery life
- Compliance: IEC 62133
Nursing Call Relay
- Maximum Input Voltage: 30 VAC or VDC (polarity is not important)
- Load Current: 120 mA continuous (peak 300 mA @ 100 ms)
- Minimum Resistance: 26.5 ohms to 50.5 ohms (40.5 ohms typical) during alarms
- Ground Reference: Isolated Ground
- Electrical Isolation: 1500 Volts
Performance
- SpO2: 1% to 100%
- Pulse Rate: 20 to 250 beats per minute (bpm)
- Pulse Amplitude: 0.03% to 20%
Accuracy
- Adult – Neonate
- Saturation: (% SpO2 ± 1 SD)
- Adult: 70% to 100% ± 2 digits
- Neonate: 70% to 100% ± 3 digits
- Low perfusion: 70% to 100% ± 2 digits
- Pulse Rate: 20 to 250 bpm ± 3 digits
- Low Perfusion: 20 to 250 bpm ± 3 digits
Power
- Power Requirements: 80-263 VAC, 47/63 Hz, 30 VA power
- Fuse rating: Slow blow 1.5A 250V
Output
- Capability to connect with the Nellcor Oxinet III central monitoring station via wired/wireless Ethernet as well as a wired serial port
- Capability to connect to Philips Vuelink module and Nurse Call via wired serial port
- Capability to download trend data to PC
Optional Accessories
- GCX mounting adapter interface cable
Operating Range and Dissipation
- Red Light Wavelength: Approximately 660 nm
- Infrared Light Wavelength: Approximately 900 nm
- Optical Output Power Less than 15 mW
- Power Dissipation: 52.5 mW
Environmental
- Operating
- Temperature: 5 ºC to 40 ºC (41 ºF to 104 ºF)
- Altitude: -304.8 m to 4,572 m (-1,000 ft. to 15,000 ft.)
- Atmospheric Pressure: 105 kPa to 57.2 kPa (31.0 in. Hg to 16.89 in. Hg)
- Relative Humidity: 15% to 95% non-condensing
- Transport and Storage
- Temperature: -20 ºC to 60 ºC (-4 ºF to 140 ºF)
- Altitude: -390 m to 5,574 m (-1,254 ft. to 18,288 ft.)
- Atmospheric Pressure: 50 kPa to 106 kPa (14.7 in. Hg to 31.3 in. Hg)
- Relative Humidity: 15% to 95% non-condensing
Product Compliance
- Equipment Classification: IEC/EN 80601-2-61:2011; IEC/EN 60601-1:2005; CAN/CSA C22.2 No. 60601-1:08; ANSI AAMI ES 60601-1:2005
- Protection Type: Class I (Internally powered)
- Degree of Protection: Type BF – applied part
- Mode of Operation: Continuous
- Electromagnetic Compatibility: IEC 60601-1-2:2007
- Liquid Ingress: IPX1: Protected against harmful effects of dripping water
- Degree of Safety: Not suitable for use in the presence of flammable anesthetics
Refurbished The Medtronic Covidien Nellcor PM1000N
Soma Tech Intl offers the Covidien PM1000N pulse oximeter up to 50% below OEM prices with the same service and warranty as new. The PM1000N pulse oximeters are not only technically refurbished but also cosmetically refurbished to make them work and look like new. When the refurbishing process starts on the PM1000N, it is carefully inspected and tested by our in-house biomedical engineers, who are highly skilled and certified to work on pulse oximeters. If necessary, parts are replaced to ensure that all aspects of the Covidien PM1000N meet the original manufacturer’s specifications. This ensures that the unit operates as it did when it originally left the manufacturer. After the pulse oximeter is fully restored, it undergoes a cosmetic restoration process. The unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are applied if necessary. After this detailed refurbishing process, the unit functions and looks new. Soma Tech Intl is ISO 13485 certified, guaranteeing the highest quality for all capital medical equipment sold. Before the Covidien PM1000N is labeled patient-ready and packed for shipment, it undergoes a final quality control test to ensure all components are working as intended. If you are looking to buy a refurbished Covidien PM1000N pulse oximeter, contact Soma at mailto:[email protected] or call us at 1-800-438-7662.
Soma Tech Intl is actively looking to purchase Covidien PM1000N pulse oximeters. If you or your facility is looking to sell your PM1000N, be sure to contact Soma Tech Intl. Soma’s experienced purchasing department will guide you through the entire process. Selling your used or pre-owned pulse oximeter directly to Soma cuts out the middleman, ensuring that your medical facility receives top dollar for your equipment. Soma is 100% HIPAA compliant and guarantees that your equipment arrives at our facility in the same condition it left yours. Soma Tech Intl also offers trade-in credit for your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here.
