Hemochron Response Features
The Hemochron Response Coagulation Monitor is a whole blood coagulation monitor designed to be used at the point-of-care. The Response includes an easy-to-read screen and data management features, including patient and operator ID options. QC and operator lockout can be enabled for enhanced regulatory compliance.
- Results displayed as whole blood, plasma equivalent, or INR for PT assay only
- Store 600 patient tests per well
- Store Operator and Patient Identification
- Allows supervisor to create and lock OID table
- Create and store up to 9 User Notes
- Attach up to 2 User Notes per record
- Download results to a PC
- Uses bar-coded tubes
- Internal printer
- 2-level Liquid Quality Control lockout
- 2-level Electronic System Verification lockout
- Stores 300 QC results per well
- Test Menu
- Celite® Activated Clotting Time (ACT)
- Kaolin ACT
- Glass Activated ACT
- Activated Partial Thromboplastin Time (APTT)
Hemochron Response Specifications
Dimensions
- Depth: 7.5 in (19 cm)
- Width: 10.5 in (27 cm)
- Height: 8.7 in ( 22 cm)
- Weight: 6.4 lbs (2.9 kg)
Operation
- timing Range: 22 Seconds to 1500 Seconds
- Incubation Temperature: 37 °C ±1.0 °C
- Incubation Warm-Up Time: 30 Seconds to 90 Seconds
- Full-Charge Operating Time: 8 hours( minimum)
- Battery Life: 500 recharges
- Throughput (Full Charge): 49 test cycles (at 150 sec per test) and 17 test cycles (> 500 sec per test)
AC/DC Power Mode
- Input Power: 90 to 264 VAC, 50/60 Hz, 1.2 Amps maximum
- Output Power: +12 Volts DC, 3.5 Amps maximum (42 Watts, 144 BTU/hr)
Environmental
- Ambient Temperature: 15 to 30 °C
