Olympus PSD 30 Features
The Olympus PSD-30 has been designed specifically for electrosurgery through flexible endoscopes and combines advanced cutting & coagulation capability with enhanced safety features. Optimum settings can be quickly selected for both cutting and coagulation output.
Three cutting modes allow optimal cutting and haemostasis
- Pure: Designed for quick cutting
- Blend 1: Designed for moderate cutting and haemostasis
- Blend 2: Designed for cutting with strong coagulation capability
Three coagulation modes provide optimal haemostatic effect
- Forced: Designed for comparatively strong coagulation and haemostasis
- Soft: Designed to stop light bleeding – very little tissue carbonization occurs in this mode, so it can be used to mark
tissue using a snare - Auto Stop: Designed to reduce tissue carbonization and invasion. The output is automatically stopped when a certain degree of coagulation has been reached during ’Soft’ mode coagulation
Olympus PSD 30 Specifications
Dimensions
- Height: 6.3 in ( 160mm)
- Width:11.6 in ( 295 mm)
- Length:16.5in (420 mm)
- Weight 7.8 kg
Power
- Voltage 220, 230, 240 V
- Frequency 50/60 Hz
- Input current 2 A
- Voltage fluctuation Within ±10%
- Fuse rating 3.15 A, 250 V
- Fuse size 5.0 × 20 mm
Output Types
- Cut modes: 3 modes (PURE, BLEND1, BLEND2)
- Coagulation modes: 3 modes (SOFT, AUTO STOP, FORCED)
- The AUTO STOP output uses an identical waveform to SOFT and is provided with the auto stop function
Max Output
- PURE: 50 W
- BLEND1: 50 W
- BLEND2: 50 W
- SOFT: 50 W
- AUTO STOP: 50 W
- FORCED: 50 W
- (Rated load resistance 300 O, SOFT, AUTO STOP: 100 O)
Output Time
- 10 seconds ON and 30 seconds OFF output (to continue the output, keep the output time below 10 seconds)
Safety Fuctions
Patient / S-Cord
The function detects improper connections of cords and broken wires in the patient plate and S-cord. It activates the following functions if irregularities are detected:
- Patient/S-cord warning indicator will light or flash.
- If the above condition continues for a while, an alarm will sound and high frequency will stop. (When using an endoscope without S-cord, an alarm will sound and the high-frequency output will stop immediately.))
High Frequency Output Monitor
The function detects whether the output level is in accordance with the output setting. It activates the following functions if irregularities are detected:
- High frequency output warning indicator will light
- An alarm will sound
- Output will be prevented
Output Time Monitor
The function detects the high-frequency output time. It activates the following functions if continuous output time exceeds the specified time:
- Output time warning Indicator will flash after 15 seconds of continuous output.
- If output continues for 15 more seconds (i.e. 30 seconds continuous output), the output time warning indicator will light constantly, the warning alarm will sound (in 5-second intervals), and output will be prevented.
Foot Switch Monitor
The function detects short-circuit of the foot switch. It activates the following functions if a short-circuit is detected:
- The alarm display on the output setting indicator will flash
- An alarm will sound
- Change of setting will be prevented
- Output will be prevented
Refurbished Olympus PSD 30 Electrosurgical Units
Soma Technology, Inc. offers Refurbished Olympus PSD 30 Electrosurgical Units
up to 50% below OEM prices with the same service and warranty as new. The Olympus PSD 30 Electrosurgical Units is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the Olympus PSD 30 Electrosurgical Units are carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Olympus PSD 30 Electrosurgical Units
. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Olympus system is working like new it undergoes a special cosmetic restoration process. The Olympus PSD 30 Electrosurgical Units is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Olympus PSD 30 Electrosurgical Units are labeled patient-ready and packed up for shipment, they go through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Olympus System
contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Technology, Inc. is also actively looking to purchase Olympus PSD 30 Electrosurgical Units. If you or your facility is looking to sell your Olympus PSD 30 Electrosurgical Units, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Olympus PSD 30 Electrosurgical Units to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
