Conmed Hyfrecator Plus

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Conmed Hyfrecator Plus Features

With a multitude of applications in such diverse specialties as dermatology, plastic surgery, gynecology, dental and oral surgery, ophthalmology, otolaryngology, proctology, and urology, the Conmed Hyfrecator Plus 7-797 lets you perform a wide variety of desiccation, fulguration, and coagulation office procedures.

The ConMed Hyfrecator Plus 7-797 includes a foot control pencil with 10 10-foot (3.0 m) cords, a foot pedal, and sterile sheaths. The Hyfrecator Plus 7-797’s electronic circuitry provides a near-linear power output. It provides precision whether it’s being used at full power for broad surface coagulation or low output for delicate facial procedures.

  • Monopolar and bipolar outlets
  • Banana jack outlet
  • Small compact 10 x 5 1/2 x 4
  • Hand pencil

Conmed Hyfrecator Plus Specifications


  • Depth: 4 in (102 mm)
  • Width:8.75in (222 mm)
  • Height: 7.5 in (190 mm>
  • Weight: 6 lbs (2.7kg)

Environmental Conditions for Transport & Storage

  • Temperature Range: -20 to + 60 Degrees C
  • Humidity: 0% to 97%

Output Power

  • Maximum Power: 36 Watts (500 Ohm Load)
  • Bipolar: 30+/- 6 Watts (500 Ohm Load)
  • High: 30+/- 6 Watts (1000 Ohm Load)
  • Low: 15 +2/6 Watts (500 Ohm Load)

Open Circuit Voltage

  • bipolar: 3000 Vp-p Max.
  • High: 8000 Vp, 10,000 Vp-p Max.
  • Low: 4000 Vp-p Max


  • 60 hz: 50 microamps max, with the third wire of the line open.


  • 500 Khz at 31.25 KHz rate

Refurbished Conmed Conmed Hyfrecator Plus Electrosurgical Unit

Soma Technology, Inc. offers Refurbished Conmed Hyfrecator Plus Electrosurgical unit System up to 50% below OEM prices with the same service and warranty as new. The Conmed Hyfrecator Plus Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the conmed Hyfrecator Plus system is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on the Conmed Hyfrecator Plus Electrosurgical Unit. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Conmed system is working like new it undergoes a special cosmetic restoration process. The ConMed Hyfrecator Plus Electrosurgical Unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Conmed Hyfrecator Plus system is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Conmed Hyfrecator contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Technology, Inc. is also actively looking to purchase a Conmed Hyfrecator Plus Electrosurgical Unit System If you or your facility are looking to sell your Conmed Hyfrecator Plus, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Conmed Hyfrecator 2000 Electrosurgical Unit System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.


Questions about our Electrosurgical Units?

Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your electrosurgical units? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us