Conmed System 1000 SES

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Conmed System 1000 SES Features

The CONMED 1000SES Smoke Evacuation System is designed to remove smoke and noxious odors produced by surgical smoke during laser and electrosurgical procedures.

has been designed with a high suction, high flow rate centrifugal action pump. The ultra-quiet motor is used to draw the surgical smoke from the surgical site, through the vacuum tubing and into the CONMED 1000SESTM filter where the surgical smoke is processed by a series of filters. A single disposable filter is used to simplify the installation and removal during filter changes. The filter is completely enclosed to protect the healthcare personnel from potential contamination during filter changes. One CONMED 1000SESTM Filter contains four different filter stages to decontaminate the smoke plume.

  • The first stage filtration is a prefilter whose function is to trap and remove gross particulate and casual fluid.
  • The second stage filtration is a VLSI (Very Large Scale Integrated) grade ULPA (Ultra Low Penetration Air) filter whose high-tech patented design captures particulates and micro-organisms down to 0.012 µm at an efficiency of 99.99995%. Each VLSI-grade ULPA filter is pretested and certified before use.
  • The third stage of filtration uses the highest grade virgin coal-grade activated carbon for the removal and adsorption of odors and toxic gases produced by the cauterization of tissue. These harmful gases may constitute a health hazard to healthcare professionals who are subjected to prolonged exposure. The activated carbon used in the CONMED 1000SESTM preferentially removes toxic organic gases rather than water vapor and provides optimal odor removal.
  • The fourth stage filtration is an expanded foam and paper media used to trap activated carbon fines from migrating out of the filter. The first, second, and fourth stages of the CONMED 1000SESTM Filter have been impregnated with a chemical agent. The chemical agent has been applied with a patented process that prevents the agent from being washed or blown off the filter media.

Conmed System 1000 SES Specifications


  • Height: 14.25 in ( 36.2 cm)
  • Width: 12.38 in (34 cm)
  • Length: 18.25 in (46.4 cm)
  • Weight: 25.5 lbs. (11.6 kg)

Flow Rate

  • 70 CFM (1982 LPM) with 1-1/4″ (32mm) hose
  • 48 CFM (1359 LPM) with 7/8″ (22mm) hose


  • 15 AMPS @ 100V/120V
  • 8 AMPS @ 220/240V

Tubing Size

  • 7/8″ (22mm), 1-1/4″ (32mm), and 1/4″ (6.4mm)

Motor Rating

  • 115 CFM (3257 LPM)

Static Suction

  • 97″ (246cm) H2O

Filtration Rate

  • 0.012 µm

Filtration Efficiency

  • 99.99995%

Refurbished Conmed Conmed System 1000 SES Electrosurgical Unit

Soma Technology, Inc. offers Refurbished Conmed System 1000 SES Electrosurgical unit Systems up to 50% below OEM prices with the same service and warranty as new. The Conmed System 1000 SES Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the Conmed System 1000 SES system is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on the Conmed System 1000 SES Electrosurgical Unit. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Conmed system is working like new it undergoes a special cosmetic restoration process. The ConMed System 1000 SES Electrosurgical Unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Conmed System, 1000 SES is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Conmed System contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Technology, Inc. is also actively looking to purchase a Conmed System 1000 SES Electrosurgical Unit System. If you or your facility is looking to sell your Conmed System 1000 SES, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Conmed System 1000 SES Electrosurgical Unit System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.


Questions about our Electrosurgical Units?

Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your electrosurgical units? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us