Conmed System 5000 Electrosurgical Unit

Quotes in less than 24 hours Download Specifications

Conmed System 5000 Features

The Conmed 5000 Electrosurgical Unit can provide a wide range of procedures in one machine. The 5000 Electrosurgical unit comes with a Fluid Mode and a Laparoscopic Mode. The Fluid Mode adds additional energy while in a fluid environment and the laparoscopic mode limits the volts below 2,700 volts to reduce the risk of burns. The System 5000 is built off of an advanced digital signal processing architecture that allows the unit to sample current and voltage over 450,000 times a minute while adjusting to accommodate the divergent delivers that are needed per mode. The Conmed 5000 comes with nine programable memory settings, that make it easy to switch back and forth between procedures.

  • Offering patient safety that can reduce blood loss and the risk of accidental burns
  • Nine programable settings, allow surgeons to save their preferred operating conditions
  • Remote Power Control with a standard Electrosurgical pencil

Preset Modes

  • General Mode, traditionally used in open procedures.
  • Fluids Mode – Quick start-up in fluid environments, such as urology or arthroscopy.
  • Laparoscopic Mode, Limits output voltage to minimize potential harmful effects of capacitive coupling and insulation breakdown.
  • Pulse Cut, is useful when the precise cutting effect is needed around delicate structures.
  • Pulse Coag, provides superficial homeostasis via pulsing bursts of coagulation energy.
  • Bipolar Output Meter provides feedback on desiccation levels via audible and visual indicators.
  • ARM (Automatic Return Monitoring), provides advanced warning of compromised patient to dispersive electrode contact.

Conmed System 5000 Specifications

Monopolar Cut (blend) Coagulate

  • Max. Energy Output (at rated ohms) (Systems)
    • More than 250 Watts 300
    • Max Peak Voltage: 820 Pure
  • Max. Energy Output (at rated ohms) (Systems)
    • Up to 150 Watts 80
    • Max Peak Voltage: 6,350 spray

Bipolar (Macro, Micro)

  • Max. Energy Output (at rated ohms) (Systems)
    • Up to 150 Watts 90
    • Max Peak Voltage: 610 Macro
  • Max. Energy Output (at rated ohms) (Systems)
    • Up to 50 Watts 50
    • Max Peak Voltage: 170 Micro


  • 14” x 35” x 48” (5.5cm x 13.5cm x 18.9 cm”)


  • 9.8 lbs. (21.5 kg)


  • Solid-state


  • 391 cut, 562 coag
  • 391 bipolar

Cooling System

  • Convection, fan

Independent Output

  • Yes

Power Setting Display

  • Yes

Visual (Alerts)

  • Yes

Audible (Alerts)

  • 2 tones

Volume Control (Signals)

  • Yes

Power Needed, VAC (Energy)

  • 90-127, 198-253″

Bandwidth (Outputs)

  • 2


  • Yes

Bipolar System

  • Yes

Refurbished Conmed Conmed System 2450 Electrosurgical Unit

Soma Tech Intl offers Refurbished Conmed System 5000 Electrosurgical unit Systems up to 50% below OEM prices with the same service and warranty as new. The Conmed System 5000 Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the Conmed System 5000 system is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Electrosurgical Units. If necessary, parts are replaced to make sure that all aspects of the electrosurgical unit are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Conmed system is working like new it undergoes a special cosmetic restoration process. The ConMed System 5000 Electrosurgical Unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Conmed System 5000 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Conmed System contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Conmed System 5000 Electrosurgical Unit System. If you or your facility is looking to sell your Conmed System 5000, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Conmed System 5000 Electrosurgical Unit System to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Tech’s purchasing department at [email protected] or send us a message on our Sell to Soma website.


Questions about our Electrosurgical Units?

Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your electrosurgical units? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us