The Midmark Ritter M9 sterilizer has a small compact footprint. Pack all the reliable sterilizing power you need into one small compact unit, perfect for limited spaces. The M9 UltraClave features a visual LCD that comes with simple prompts that help you easily select the cycle that is needed. Once the sterilization cycle is over the door will automatically open to allow the steam to dissipate.This allows the instruments to dry efficiently. The Midmark has four defining cycles; unwrapped items, pouches, packs and hand pieces, along with customizable cycles with a self-program control.
The LCD indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode and dry mode, the remaining cycle time is displayed as well as temperature and pressure inside the autoclave.
Once the autoclave is has completed its time cycle, the Midmark's door opens automatically and quietly to dissipate steam and dry your instruments. You’ll have a dry and sterile instrument every time.
If the door on the autoclave is not closed completely or the reservoir water level is low, the LCD will provide the appropriate message. In either case, sterilization can’t continue until you’ve attended the unit.
For ease of draining and filling, the Midmark M9’s reservoir fill port and drain tube is in the front of the unit, not on top or in back of the autoclave.
The M9 printer accessory provides a permanent record of autoclave cycles, times, temperatures and pressures during a cycle.
Programmable controls allow for the creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275°F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired.
Four pre-programmed sterilization cycle controls: Unwrapped (132º C or 270º F for 3 minutes), Pouched (132º C or 270º F for 5 minutes), Packs (121º C or 250º F for 30 minutes), Handpiece (unwrapped and pouched) (132° C or 270° F for 6 minutes).
Soma Tech Intl offers Ritter M9 Sterilizer up to 50% below OEM prices with the same service and warranty as new. The Midmark M9 sterilizer is not only technically refurbished but also cosmetically refurbished to make the autoclave work and look like new. When the refurbishing process starts on the Midmark M9 sterilizer, it is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on an autoclave. If necessary, parts are replaced to make sure that all aspects of the Midmark M9 ultraclave automatic sterilizer's are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Ritter M9 sterilizer is working like new it undergoes a special cosmetic restoration process. The M9 autoclave is cleaned, minor scratches and dents are repaired, the sterilizer is painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the sterilizer functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before this steam sterilizer Midmark is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects of the Midmark are again working as they should. If you are looking to buy refurbished Midmark M9 UltraClave contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Midmark sterilizer If you or your facility is looking to sell your Midmark sterilizer /a>, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Midmark Ritter M9 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your Midmark equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech Intl's purchasing department at [email protected] or send us a message on our Sell to Soma website.
Soma Tech Intl offers a wide range of sterilizers . If you have any questions about any other Midmark sterilizer or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.