GE OEC Elite - 12" I.I.

Other products by GE
Other products in C-Arms

24 Hour Turn Around Time - The Fastest Turnaround for Medical Equipment

GE OEC Elite - 12" Image Intensifier Features

The GE OEC Elite with a 12” image intensifier was designed to enhance surgical efficiency while delivering superb image quality. The OEC Elite allows you to manage dosages with profiles and control features and operates with enhanced ease-of-use and efficiency. This system is ideally suited for a range of surgical needs including orthopedics, gastrointestinal, endoscopic, urologic, neurologic, critical care, and emergency procedures.

Clear 1k x1k x 16 bit image processing at 30 fps.
12-Inch image intensifier detector.
Optional laser aimer to position the detector over the anatomy of interest.
Removable anti-scatter grid
30% less force needed to maneuver and position than previous models.
Advanced cooling technology.
Low profile X-ray tube.
Crisp high-bright anti-glare 27” touchscreen display.

GE OEC Elite - 12" Image Intensifier Specifications

Physical Specifications

Mainframe

System Height: 73.8” (187.5 cm)
System Width: 33.5” (85.1 cm)
System Length: 81” (205.7 cm)
Weight: 660 lbs. (277 kg)

C-arm

SID: 39.4” (100.1 cm)
Free space in arc: 31” (78.7 cm)
Depth in arc: 28” (77.1 cm)
Orbital Rotation: 115 ° (90° Underscan / 25° Overscan)
Lateral Rotation: 360° (+180° / -180°)
Wig/wag: 20°
Horizontal travel: 8” (20.3 cm)
Vertical Travel: 18” (45.7 cm)

Workstation

Height: 67.5” (171.5 cm)
Width: 34.1” (86.7 cm)
Depth: 25.8” (65.5 cm)
Weight: 428 lbs (194 kg)

Image Acquisition

12-Inch Image Intensifier

Tri-mode 12”/9”/6” image intensifier
Minimum central resolution (at monitor):

12”: 1.6 lp/mm
9”: 2.2 lp/mm
6”: 2.6 lp/mm

DQE: 65% (typical)
Removable grid

Image Processing

1 k x 1 k x 16 bit: image intensifier

Generator

60 kHz high frequency
15 kW power
Up to 120 kVp
Continuous high level fluoroscopy (HLF) up to 20 mA
Pulsed HLF up to 40 mA
Digital spot up to 75 mA
Full power from a standard wall outlet
Patented battery buffered design

X-ray Tube

Rotating anode X-ray tube
0.3 mm and 0.6 mm nominal focal spots
Anode heat capacity: 300,000 HU
Anode cooling rate: 85,000 HU/min
Housing heat capacity: 1,600,000 HU/min
Housing cooling rate:

21 cm CFD - 22,500 HU/min
31 cm CFD - 31,000 HU/min
9” I.I. - 22,500 HU/min
12” I.I. - 22,500 HU/min

Digital Image Orientation

Digitally adjusts image display for live and last image hold
Automatic image update preserves image orientation settings applied during live and last image hold for subsequent images

Image rotation
Live and last image hold rotated in real-time
On-screen display of rotation degrees
Image reversal (left-to-right)
Image invert (top-to-bottom)

On-screen orientation indicator (real-time feedback without fluoroscopy)

PreView Collimator

On-screen collimator position indication
PreView iris collimator
PreView Tungsten rotatable double leaf collimator
Adjust collimators without X-ray exposure

Fluoroscopy Mode

kVp range: 40 - 120
mA range: 0.2 - 10 normal mode 0.2 - 20 HLF
Auto and manual fluoroscopy modes

Pulsed Fluoroscopy Mode

kVp range: 40 - 120
mA range: 0.2 - 10 normal mode 0.2 - 40 HLF
Pulse rate: 8 pps
Pulse width: 25 ms
Auto and manual pulsed fluoroscopy modes
Reduces X-ray dose to patient and operator

Digital Spot Mode

kVp range: 40 - 120
mA range: Up to 75
Automatic exposure termination and automatic image save

TechView Monitor

*Optional on image Intensifier modes

10.4” (26.4cm) display, LCD flat panel monitor mounted on mainframe

270° side/side rotation
30° up/ 5° down tilt
Horizontal viewing angle 80°, Vertical viewing angle 70°

800 x 600 resolution monitor

Image Processing

AutoTrak

Automatically seeks the subject anatomy anywhere within the imaging field
Selects the optimum imaging technique by varying mA, kVp, and gain
Automatically adjusts to anatomical size and location
Provides uniform image quality throughout the entire image

Image I.Q.

Smart Window - Dynamically senses the collimator position and automatically adjusts image brightness and contrast
Smart Metal - Adjusts brightness and contrast automatically and allows the user to adjust sensitivity levels for optimum image quality even when metal is introduced into the field
Tungsten Collimator - Denser collimator limits X-ray exposure area, reduces scatter radiation, and improves image detail

Workstation

Connectivity

Wired Ethernet
USB data transfer
DVI-I output
Integrated film/paper printer (optional)*
Thermal printers

Video Monitor

27 in (69 cm) LCD TFT color display
Anti-glare
450 cd/m2 maximum brightness
Touch screen system control
2560 x 1440 high resolution display
Integrated PIP window to display color
DVI-D input

User Interface

Touchscreen control simplifies operation
Automated system operation requires minimum operator interface
Multi-functional controls with a footswitch or hand-held control
Physical keyboard with integrated touchpad with a sealed silicone design for dust-free, contaminant-free and water-resistant use
Physical image control keypad
On-screen virtual keyboard and image control keypad
Multi-purpose image directory to retrieve and review images, copy image(s), or manual delete image(s)
Integrated DICOM interface
Radiation dose structured report (RDSR)
X-ray dose summary
Room-in-use indicator interface
SmartConnect allows workstation to operate independently of C-arm and connect/ disconnect C-arm when needed