Ethicon Megadyne Mega Power 1000

More Information on the Ethicon Megadyne Mega Power

The MEGADYNE MEGA POWER Electrosurgical Generator is easy to set up. The Megadyne Mega Power Electrosurgical Generator was designed to be easy to use.

The Power of Simplicity

Surgical teams value a generator that is simple, intuitive to use, and easy to set up. The intuitive design and user-friendly set-up of the MEGA POWER Generator is the answer—allowing your surgical team to hit the ground running.

The Power of Performance

Constant Control Technology
The Constant Control Technology™ feature is designed to monitor tissue impedance and adjust power output accordingly.

Built-In Bipolar Current Meter
Provides a visual indication of current flow

Quality and reliability
Performance and quality workmanship is backed by a warranty. Contact your representative for details.

Variety of Modes

Advanced Cutting Effect (ACE) Mode
The proprietary ACE mode automatically controls the output power of the generator to provide a consistent cutting effect.

Pure Cut Mode
Provides a standard cutting effect with little hemostasis.

Pure Cut Mode
Provides a standard cutting effect with little hemostasis.

COAG1
A desiccation mode that provides hemostasis and desiccation to tissue that is in contact with the active electrode. COAG 1 is designed to allow the active electrode to efficiently move through tissue for coagulation with dissection.

COAG2
Delivers a more gradual onset of energy and may be preferred by surgeons desiring a mild delivery of coagulation with desiccation.

Spray Mode
Spray Coagulation (fulguration mode) is designed to provide hemostasis in a broader area compared to desiccation. Spray mode provides a diminished cutting effect when compared to cut modes.

Micro Bipolar
Delivers a precise and controlled bipolar effect. It delivers consistent power to provide a tissue effect designed for all standard bipolar applications.

Macro Bipolar
Delivers a rapid onset of power and higher voltage power output compared to Micro Bipolar.

Megadyne Mega Power Electrosurgical Generator Quick Start Guide

• Recall Button - Recalls the last power setting and mode used when the recall button is pushed upon startup. Thereafter, toggling between modes will maintain the last power setting used.
• on/Off Power Switch - Press button to turn the generator on or off. Lights will blink for eight seconds while the system performs a self-diagnostic system check.
• Power Up/Down Button - Increases or decreases the power in a selected mode. The arrow-up key increases power settings in one-watt increments up to 40 watts and in increments of five watts thereafter. The arrow down key will decrease power accordingly.
• Bipolar Current Meter- The built-in current meter provides a visual indication of current flow. As tissue becomes desiccated and dries, current flow is diminished as illustrated by a reduction in light bars on the current monitor.
• Bipolar Receptacle - The bipolar receptacle can accept either a foot-switching accessory or a hand-switching accessory. A foot switching instrument requires two large connectors to be inserted into the two mating receptacles. A hand-switching instrument uses an additional male pin on the molded connector that is inserted into the smaller mating receptacle.
• Monopolar Receptacles - Monopolar accessories inserted into the monopolar hand-switching receptacles may be activated by depressing either the “CUT” or “COAG” keys on the pencil or foot switch
• Patient Return Electrode Unit - Install a patient return electrode according to the electrode manufacturer’s instructions for use.

Cleaning the Megadyne Mega Power Generator

Disconnect the power cord from the wall outlet prior to cleaning the generator. Use a mild detergent or disinfectant to clean the generator. Abrasive cleaners may scratch the displays. Do not allow fluids to drain inside the generator

Power Settings

Settings will vary according to surgeons’ preferences. To increase power intensity, increase the power setting. To decrease the intensity of power, lower the power setting. If a proper setting is not known, set the generator at a low setting and increase power until the desired effect is obtained.

Refurbished ERBE VIO 300 S Electrosurgical Unit

Soma Technology, Inc. offers Refurbished Ethicon Megadyne Mega Power 1000 Electrosurgical Generator System up to 50% below OEM prices with the same service and warranty as new. The Ethicon Megadyne Mega Power 1000 Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Ethicon Megadyne Mega Power 1000 generator is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on Ethicon Megadyne Mega Power 1000 Electrosurgical Unit . If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer's specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Ethicon system is working like new it undergoes a special cosmetic restoration process. The Ethicon Megadyne Mega Power 1000 Electrosurgical Generator is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Ethicon Megadyne Mega Power, 1000 Generator is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Ethicon Megadyne System contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Technology, Inc. is also actively looking to purchase an Ethicon Megadyne Mega Power 1000 Electrosurgical Generator System If you or your facility is looking to sell your Ethicon Megadyne Mega Power 1000, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Ethicon Megadyne Mega Power 1000 Electrosurgical Generator System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.