1.800.GET.SOMA (1.800.438.7662)

Bovie IDS 310

click on thumbnail to zoom

Other products by Bovie Aaron
Other products in Electrosurgical Units

Specifications

24 Hour Turn Around Time - The Fastest Turnaround for Medical Equipment

Bovie IDS 310 Features

The Bovie IDS 310 was designed in conjunction with OR clinicians to provide a safe, user-friendly generator to meet all operating room procedure performance demands. This innovative energy-based device offers 13 modes of surgical energy delivery. Special modalities include the advanced Bovie Bipolar, Auto Bipolar options, and special Laparoscopic modes. These modes were included to assist surgeons in tailoring all electrosurgery needs for their variety of surgical applications and user preferences.

Bovie Bipolar - Pulsing coagulation for quick and powerful coagulation of tissue
Auto Bipolar - Offers immediate and simplified tissue coagulation with minimal tissue damage
Specialized Laparoscopic Mode - Recalls up to 10 presets and up to 6 bipolar output preferences
Adjustable Power During Activiation

Bovie IDS 310 Specifications

Dimensions

Height: 6.5 In (16.5 cm)
Width: 14.75 In (37.5 cm)
Depth: 18.1 In (46 cm)
Weight: < 20 lbs (< 9.07 kg)

General

Contact Monitoring Systems: BovieNEM
Contact Monitoring Systems

Range/Trip Point: 10 ohms or less over entire
operating range (10C° to 40°C)

Cooling System: Passive Cooling
Technology: Isolated RF Output
Pre-set Feature: Yes
Monopolar HP Ports: 2
Dual Activation Tone Alert: Yes
Connector Ports/Power Switch: Black

Operating Parameters

Ambient temperature range 10° to 40° C
Relative humidity 30% to 75%, non-condensing
Atmospheric pressure 70kPa to 106kPa
Warm-up time If transported or stored at temperatures outside the operating temperature range, allow one hour for the generator to reach room temperature before use.

Transport

Ambient temperature range -40˚ to +70˚ C
Relative humidity 10% to 100%, including condensation
Atmospheric pressure 50kPa to 106kPa

Storage

Ambient temperature range 10˚ to 30˚ C
Relative humidity 30% to 75%, non-condensing
Atmospheric pressure 50kPa to 106kPa

Bipolar

Macro Bipolar

Watts: 150
VPeak Max Voltage: 600V
Crest Factor (Typical): 1.5 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Micro Bipolar

Watts: 80
VPeak Max Voltage: 450V
Crest Factor (Typical): 1.5 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Standard Bipolar

Watts: 50
VPeak Max Voltage: 300V
Crest Factor (Typical): 1.5 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Bovie Bipolar

Watts: 225
VPeak Max Voltage: 250V
Crest Factor (Typical): 1.5 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Auto Bipolar

Watts: 80
Frequency: 490 kHz ± 4.9 kHz

Monopolar

Cut I

Watts: 300
VPeak Max Voltage: 1000V
Crest Factor (Typical): 1.7 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Cut II

Watts: 300
VPeak Max Voltage: 750V
Crest Factor (Typical): 1.7 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Blend (1)

Watts: 200
VPeak Max Voltage: 1320V
Crest Factor (Typical): 1.8 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Blend (2)

Watts: 200
VPeak Max Voltage: 1475V
Crest Factor (Typical): 2.0 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Blend (3)

Watts: 200
VPeak Max Voltage: 1650V
Crest Factor (Typical): 2.2 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Blend (4)

Watts: 200
VPeak Max Voltage: 1870V
Crest Factor (Typical): 2.4 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Pinpoint Coagulation

Watts: 120
VPeak Max Voltage: 1800V
Crest Factor (Typical): 3.1 ± 20%
Frequency: 490 kHz ± 4.9 kHz

Spray Coagulation

Watts: 120
VPeak Max Voltage: 4000V
Crest Factor (Typical): 6.0 ± 20%
Frequency: 350 to 450 kHz

Gentle Coagulation

Watts: 120
VPeak Max Voltage: 450V
Crest Factor (Typical): 1.6 ± 20%
Frequency: 490 kHz ± 4.9 kH

Key Features of the Bovie IDS-310

The Bovie® IDS-210 includes the latest technology. This unit offers unsurpassed performance, flexibility, reliability, and convenience. It includes the following features:

two cut modes, Cut I and Cut II
Two cut modes give the surgeon flexibility to cut all types of tissue without losing performance. Cut I generate constant output power over a wide range of impedances. Refer to Appendix A, Technical Specifications section of this guide.

Cut II is a softer cut that generates constant output power with a lower voltage over a small range of impedances suggested for laparoscopic procedures. Refer to Appendix A, Technical Specifications section of this guide.
Four levels of Band
The Blend mode is a combination of cutting and hemostasis. The IDS-210 gives the surgeon the freedom to adjust the desired level of hemostasis. A level setting of 1 is minimal blend with maximum cutting effect. A level setting of 4 is maximum hemostasis (blend) with minimal cutting effect. This adjustment is easily achieved by an incremental 4-level adjustment. Refer to Section 2, Controls, Indicators, and Receptacles, Cut and Blend Controls. The Blend mode improves the rate of targeted tissue desiccation without increasing the power delivered by the generator.
Three leaves of coagulation: Pinpoint, Spray and Gentle Coagulation

Pinpoint provides precise control of bleeding in localized areas.
Spray provides greater control of bleeding in highly vascular tissue over broad surface areas.
Gentle provides a more intense coagulation than in other modes. For instance, when Coagulation is necessary in short amounts of time, reduced electrode carbonization is provided

Macro Bipolar Mode
The Macro Bipolar Mode provides delicate Bipolar coagulation effects to prevent tip tissue adhesion and carbonization.
Micro Bipolar mode
The Micro Bipolar Mode provides precise Bipolar coagulation effects.
Standard Mode
The Standard Bipolar Mode provides power for conventional Bipolar output.
Bovie bipolar Mode
The Bovie® Bipolar Mode is a special pulsing coagulation mode that delivers quick, precise and powerful coagulation to achieve optimal surgical fusion effects to most tissue types
Four bipolar modes with an Auto Bipolar option and Virtual Ammeter LED Display
For procedures requiring Bipolar output power, the generator offers the surgeon four Bipolar modes (Macro, Micro and Standard and Bovie Bipolar). The generator also offers a virtual ammeter that displays the RF current flowing during bipolar applications. Use the Auto Bipolar option to set up bipolar mode parameters and select Virtual Ammeter display features.
Presets
The surgeon can store 10 user-defined RF presets and 6 interface Set-Up Preferences presets for easy recall of frequently used settings.

Questions about our electrosurgical units?

Soma Technology, Inc offers a wide range of electrosurgical units . If you have any questions about any of our electrosurgical units or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.