The Conmed 5000 Electrosurgical Unit can provide a wide range of procedures in one machine. The 5000 Electrosurgical unit comes with a Fluid Mode and a Laparoscopic Mode. The Fluid Mode added additional energy while in a fluid environment and the laparoscopic mode limits the volts below 2,7000 volts to reduce the risk of burns. The System 5000 is build off of an advanced digital signal processing architecture that allows the unit to sample current and voltage over 450,00 times a minute while adjusting to accommodate the divergent delivers that are needed per mode. The Conmed 5000 comes with nine programable memory settings, that make it easy to switch back and forth between procedures.
Since its introduction, the Conmed Electrosurgical Unit (ESU) has become synonymous with safety, performance, precision, and reliability. Trusted around the world, the versatility of the System 5000 meets a variety of procedure-specific energy output needs including General, Laparoscopic and Robotic surgery
Controlled Energy for the Desired Clinical Effect to Tissue Proprietary Dynamic Response Technology samples the current and voltage 450,000 times per second which enables it to respond to tissue impedance changes in less than 10 milliseconds. This ensures the precise voltage needed is safely delivered to each tissue type.
Reduced Risk of Coupling and Inadvertent Burns Helps Improve Patient Safety The System 5000’s Lap mode provides a unique safety feature that significantly reduces the risk of coupling and inadvertent burns during laparoscopic and robotic surgery by limiting voltage in all monopolar modalities to below 2,700 volts.
Unique Pulse Coag Mode Helps Minimize Blood Loss With pulsing coagulation energy on and off every 2.5 milliseconds, precise hemostasis with less tissue carbonization than standard coag at equivalent power settings is achieved.
Validated for Use With da Vinci Surgical System Custom energy activation cable allows for seamless activation with the da Vinci S® & Si surgical robotic systems.
Pre-set and programmable modes: System 5000 has several easy-to-use pre-set specialty modes, and memory space for surgeons to set their own preferences. It has nine programmable memory settings, allowing surgeons to program in their preferred settings: this reduces set up time, helping to streamline the surgical process. The pre-programmed modes establish a precise baseline of safe energy output and include: general, fluid, laparoscopic, pulse cut, pulse coagulation, micro bipolar, and macro bipolar modes. These functions make System 5000 ideal for use in general surgery, orthopedics, urology, cardiology, obstetrics-gynecology, plastic surgery, and otolaryngology.
Patient safety: System 5000 offers two unique modes which have been designed with maximized safety in mind. Where standard generators only limit the voltage output in Cut Mode, System 5000's Lap Mode effectively limits the voltage to less than 2,700 in all monopolar modes. This significantly reduces the risk of coupling and accidental burns during laparoscopic and robotic surgery, increasing patient safety. System 5000 also features a Pulse Coag Mode which provides pulsing bursts of coagulation energy. This energy pulses every 2.5 milliseconds to provide precise hemostasis, with far less carbonization of tissue than is caused by standard coagulation. This minimization of blood loss works to further increase patient safety.
Smoke evacuation: System 5000 can be configured to include ConMed's AER DEFENSE smoke evacuation system. When the energy is activated, it automatically triggers smoke evacuation and clears the air in theatre, a critical part of safe electrosurgery. The GoldVac & ClearVac smoke evacuation pencils and ConMed laparoscopic tubing can be effectively used with this great feature.
Storage space: System 5000 includes a mounting pedestal and upper and lower storage baskets, and can be configured to include a saddlebag for additional storage. The huge amount of storage space included allows for a clean, organized surgical environment with all necessary equipment stored neatly on-hand.
No other generator allows the surgeon to customize the output characteristics as precisely as the System 5000. The System 5000 offers advanced, easy-to-use, specialty modes including:
Soma Tech Intl offers Refurbished Conmed System 5000 Electrosurgical unit System up to 50% below OEM prices with the same service and warranty as new. The Conmed System 5000 Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Conmed System 5000 system is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on Electrosurgical Units . If necessary, parts are replaced to make sure that all aspects of the electrosurgical unit are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Conmed system is working like new it undergoes a special cosmetic restoration process. The ConMed System 5000 Electrosurgical Unit is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Conmed System 5000 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Conmed System contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Conmed System 5000 Electrosurgical Unit System If you or your facility is looking to sell your Conmed System 5000, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Conmed System 5000 Electrosurgical Unit System to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Tech’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
Soma Tech Intl offers a wide range of electrosurgical units . If you have any questions about any of our electrosurgical units or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.