CSZ Hemotherm 400MR Sub Zero Cooler Features
The CSZ HEMOTHERM 400MR Cooler/Heater system is used to lower/raise the blood temperature and/or maintain blood temperature, as required, through conductive heat transfer. The conductive heat transfer on the Sub Zero cooler is accomplished through any type of blood oxygenator/heat exchanger unit, along with the use of a blanket under the patient for the re-warming phase, if desired.
- Efficient Heating/Cooling: Dual reservoirs double your efficiency. Independent cooling and heating reservoirs permit instant changeover from one bath to the other. Each reservoir has its own control mechanism and temperature display. The efficient pump produces a flow rate higher than any competitor’s units. The Hemotherm lowers reservoir water temperatures at a rate that rapidly produces a significant reduction in blood temperature.
- Patient Safety: Built-in secondary Hi and Lo safety thermostats and an external circuit breaker which can be reset to enhance the safe design of Hemotherm.
- Convenient: Ice is not required with this system, eliminating the mess and providing a simple setup. For additional convenience, an optional remote control is available to change and monitor the settings of the Hemotherm from a remote location. Microprocessor control provides an easier, more accurate operation. A large LED readout allows monitoring at a glance. Eliminates the need for calibration.
- Ease of Use: Mechanical refrigeration means easy set-up, quick response, and minimum clean-up. It eliminates the preconditioning process. Hemotherm takes up just 3.4 sq. ft (0.3 sq. m) of floor
space and moves easily on conductive swivel casters. - Dual Purpose: The Hemotherm may also be used with a hyper/hypothermia blanket to provide
additional patient cooling/re-warming therapy
CSZ Hemotherm 400MR Specifications
Dimensions
- Height: 32 in (81.3 cm)
- Width: 22in (55.9 cm)
- Depth: 22 in (55.9 cm)
- Weight: 198lbs (89.8 kg)
Reservoir Capacity
- Cool: 8 qts. (7.6 liters)
- Heat: 6 its (5.7 liters)
- Reservoir Fluid: Use only sterile water or water that has been passed through a filter of less than or equal to 0.22 microns.
- Reservoir Opening: Easy-to-Fill
- Reservoir Construction: Plastic
Flow Rate
- 13 Liters/Minute through self-sealing Hansen Fittings
- 15 Liters/Minute with flow through Hansen Fittings
Connections
- 12.5 PSI – Blanket Connection Quick Disconnect Fittings
- 1 Set ½” Hansen Fittings for Heat Exchanger
- 1 Set 1/8″ Hansen Fittings for Blanket
- 1 Set ¼” Hansen Fittings for draining (on unit)
- 1 Additional set of ½” Hansen Fittings included for tubing
Electrical Characteristics
- (std) 115V, 60Hz, 16.9 amps
- (opt) 100V, 50/60Hz, 20 amps
- (opt) 230V, 50/60HZ, 10.9 amps
- (opt) 240V, 50/60HZ, 10.5 amps
Outlet Required
- 115VAC units – 20 amps, AC grounded hospital grade plug <?li>
- 100VAC units – 20 amps, AC grounded with no plug
- 230VAC units – 15 amps, AC grounded with a European plug
- 240VAC units – 15 amps, AC grounded with a European plug
Current Leakage
- under 300 microamps (100/115)
- Under 500 microamps (230/240)
Cooling system
- Compressor: 1/2 HP Oversize
- Fluid Cooling Range: 32° to 3° C
Heating System
- Power Rating:
- 100/115 Vac Units
- 300 Watt – low heater
- 1200 Watt – high heater
-
- 230/240 VAC Units
- 800 Watt – low heater
- 1200 Watt – high heater
- fluid Heating Range: 25°C to 42 °C
Refurbished CSZ Hemotherm 400MR Heater/Cooler Systems
Soma Tech Intl offers Refurbished CSZ Hemotherm 400MR heater/cooler systems up to 50% below OEM prices with the same service and warranty as new. The CSZ 400MR Heater/Cooler is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Sub Zero cooler it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Hemotherm 400MRs. If necessary, parts are replaced to make sure that all aspects of the heater/coolers are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the 400MR heater/cooler machine is working like new it undergoes a special cosmetic restoration process. The CSZ heater/cooler is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the CSZ Hemotherm 400MR heater and the cooler system are labeled patient-ready and packed up for shipment, it go through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished CSZ Hemotherm 400MR heater/cooler device contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase CSZ Hemotherm 400MR heater/cooler systems. If you or your facility is looking to sell your CSZ Hemotherm 400MR, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Sub Zero 400MR Heater/Cooler to Soma Tech takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
