ENGLISH 
Español
BD Alaris Pump Module 8100
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
Alaris IV Pump Features
The BD Alaris Pump Module 8100 is used to deliver large-volume fluids, medications, blood, and blood products using continuous intermittent delivery for adult, pediatric, or neonatal patients. Infusion delivery can occur via clinically acceptable routes of administration (e.g., intravenous, intra-arterial, subcutaneous, epidural, enteral, or irrigation of fluid spaces). Clinicians can attach up to four pump modules to a single Point of Care (PCU) Unit allowing four different infusions. The Alaris 8100 modules can be attached to either side of the Alaris PC unit to create the desired configuration.
The Alaris 8100 module supports the Guardrails Suite MX software. This software helps reduce the risk of medication errors by providing a test of reasonableness before therapy is initiated.
- Built-in LCD displays the IV fluid name, dose, and rate.
- Indicators that display channel status are red for alarm, yellow for pause, and green for infusing.
- Set-based, free-flow protection featuring the SmartSite needle-free valves.
- Sets can be used for gravity infusion.
- Designed for bag, bottle, or syringe delivery.
- Supports primary and secondary “piggyback” delivery
Alaris Pump Specifications
Dimensions
- Height: 8.9 in (22.6 cm)
- Width: 3.3 in (8.4 cm)
- Depth: 5.5 in (14 cm)
- Weight: 2.5 lb (1.13 kg)
Accumulated Air Window
- Single Bolus Setting: 50; Volume Window (mL): 2.8; Air That Causes Alarm: 10%
- Single Bolus Setting: 75; Volume Window (mL): 8.0; Air That Causes Alarm: 20%
- Single Bolus Setting: 250; Volume Window (mL): 8.0; Air That Causes Alarm: 30%
- Single Bolus Setting: 500; Volume Window (mL): 12.0; Air That Causes Alarm: 30%
Bolus Volume, Maximum after Occlusion
- Pressure Limit (mmHg): 50; Rate (mL/h): 25; Bolus Volume (mL): =0.3
- Pressure Limit (mmHg): 525; Rate (mL/h): 25; Bolus Volume (mL): =0.6
Critical Volume
- The maximum over-infusion which can occur in the event of a single fault condition is 0.6 mL.
Fluid Ingress Protection
- IPX1, Drip Proof
Maximum Infusion Pump Pressure
- 654 mmHg (Maximum Occlusion Alarm Threshold plus tolerance)
IV Pump Rate Accuracy
- ±5% at rates between 1 and 999 mL/h; ±5.5% at rates <1 mL/h, 95% of the time with 95% confidence, under the conditions listed below.
- Infusion Rate Range: 0.1 – 999 mL/h
- Ambient Temperature: 68 ±4° F (20 ±2° C)
- Source Container Height: 20 inches above top
- Test Solution: Distilled Water
- Distal Back pressure: 0 mmHg (0 kPa)
- Needle: 18 gauge
- Administration Set Model: 2210
Infusion of Air, Means to Protect the Patient from
- Ultrasonic Air-in-Line Detection: Maximum single bolus size = selectable 50, 75, or 250 microliters nominal (500 microliters in Anesthesia Mode)
IKVO (Keep Vein Open) Rate
- Factory Default Setting is 1 mL/h if the set rate is 1 mL/h or above; or set rate, if the rate is 0.9 mL/h or below.
KVO Selection Range:
- KVO rate can be set in System Configuration from 0.1 – 20 mL/h in 0.1 mL/h increments.
Occlusion Alarm Thresholds:
- Pumping Mode: 525 mmHg at rates =30 mL/h Varying level based on rate and patient back–pressure at rates <30 mL/h.
- Selectable Mode: The user selected, 50 – 525 mmHg in 25 mmHg increments.
Operating Principle:
- Positive displacement
Shock Protection:
- Type CF, Defibrillator Proof
Environmental
Operating
- Temperature Range: 41 to 104°F (5 to 40°C)
- Relative Humidity: 20 to 90%
- Atmospheric Pressure: 525 to 4560 mmHg (700 to 6080 hPa)
Storage / Transport
- Temperature Range: -4 to 140°F (-20 to 60°C)
- Relative Humidity: 5 to 85%
- Atmospheric Pressure: 375 to 760 mmHg (500 to 1013 hPa)
Refurbished BD Alaris Pump Modules
Soma Tech Intl offers the BD Alaris Pump Module 8100 infusion pump up to 50% below OEM prices with the same service and warranty as new. The Alaris 8100 infusion pumps are not only technically refurbished but also cosmetically refurbished to make them work and look like new. When the refurbishing process starts on the Alaris Pump Module 8100, it is carefully inspected and tested by our in-house biomedical engineers, who are highly skilled and certified to work on infusion pumps. If necessary, parts are replaced to ensure that all aspects of the BD Alaris Pump Module 8100 meet the original manufacturer’s specifications. This ensures that the unit operates as it did when it originally left the manufacturer. After the infusion pump is fully restored, it undergoes a cosmetic restoration process. The unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are applied if necessary. After this thorough refurbishing process, the unit functions and looks new. Soma Tech Intl is ISO 13485 certified, guaranteeing the highest quality for all capital medical equipment sold. Before the BD Alaris Pump Module 8100 is labeled patient-ready and packed for shipment, it undergoes a final quality control test to ensure all components are working as intended. If you are looking to buy a refurbished BD Alaris Pump Module 8100 infusion pump, contact Soma at soma@somatechnology.com or call us at 1-800-438-7662.
Soma Tech Intl is actively looking to purchase BD Alaris Pump Module 8100 infusion pumps. If you or your facility is looking to sell your Alaris 8100, be sure to contact Soma Tech Intl. Soma’s experienced purchasing department will guide you through the entire process. Selling your used or pre-owned infusion pump directly to Soma cuts out the middleman, ensuring that your medical facility receives top dollar for your equipment. Soma is 100% HIPAA compliant and guarantees that your equipment arrives at our facility in the same condition it left yours. Soma Tech Intl also offers trade-in credit for your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here.
