Baxter 6301 Infusion Pump

Quotes in less than 24 hours Download Specifications

Baxter 6301 Features

The Baxter 6301 Is a Dual Channel volumetric infusion pump. The Baxter 6301 has the capability of delivering a wide range of fluids at various infusion rates. The Dual Channels allow the pump to deliver fluids to two patients at once. It contains 2 linear peristaltic pump heads along with independent programming for each pump, so it can simultaneously infuse 2 different solutions. The infusion pump has a flow rate that can deliver 1-99.9 mL per hour in increments of 0.1 mL per hour. It has a battery life of 6 hours with one of the pumps running 1 to 1400mL per hour.

  • Dual Volumetric I.V. Pump
  • Flow check occlusion alarm
  • Flow rate calculation
  • Programmed delivery profiles
  • Incremental flow rate
  • Automatic restart once occlusion clears
  • Automatic piggybacking for secondary medications

Baxter 6301 Specifications

Dimensions

  • Height: 11.4 in ( 29 cm)
  • Depth: 5.1 in (13 cm)
  • Width: 13 in (32.5 cm)
  • Weight: 8.1 kg (11.6 lbs)

Battery

  • 12 volt, 3.2 sealed lead acid

Battery Life

  • Approximately 6 hours with one pump running at a rate from 1 to 1400 mL/hr using a fully charged battery<?li>
  • Approximately 4 hours with both pumps running at a rate from 1 to 1400 mL/hr using a fully charged battery
  • 8 hours for more than 80% recharge

AC Power Requirements

  • 110/120 V, 60 Hz

Power Cord

  • 2.9 m (9.5 ft) long, with Hospital Grade [plug

Fuse

  • 0.8 A, 250 V, SB, 5.2 mm (1364 in) x 20 mm (2532 in)

Flow Rate Range

  • Primary Program: 1 – 999 mL/hr in 1 mL/hr increments and 1 – 99.9 mL/hr in 0.1 mL/hr increments. The upper limit can be reduced by authorized service personnel.
  • Secondary program: 1-999 mL/hr in 1 mL/hr increments and 1 – 99.9 mL/hr in 0.1 ml/hr increments.

VTBI FRange

  • 1.0- 99.9 ml in 0.1 ml increments of 1-9,999 ml for both the primary and secondary of each pump. The upper limit can be reduced by authorized service personnel.

Leakage Current

  • Less than 50 micro-amps (per UL 544)

Power Consumption

  • 50 W

Air-in-line Detection

  • factory set to NORM, which causes the pump to alarm on air bubbles at approximately 75 uL or larger. The MIN setting causes the pump to alarm on air bubbles approximately 50 ul or larger.

Refurbished Baxter 6301 Infusion Pump

Soma Tech Intl offers Baxter 6301 Infusion Pump up to 50% below OEM prices with the same service and warranty as new. Baxter 6301 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the infusion pump is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on infusion pumps. If necessary, parts are replaced to make sure that all aspects of the infusion pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Baxter is working like new it undergoes a special cosmetic restoration process. The Baxter 6301 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Baxter 6301 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Baxter 6301 infusion pump contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Baxter 6301 Infusion pump. If you or your facility is looking to sell your Baxter infusion pumps, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Baxter 6301 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

Banner

Questions about our Infusion Pumps?

Soma Tech Intl offers a wide range of infusion pumps. If you have any questions about any of our infusion pumps or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your infusion pumps? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us