MAQUET Jostra HCU 30

Quotes in less than 24 hours Download Specifications

MAQUET Jostra HCU 30 Features

The MAQUET HCU 30 heater/cooler system is used to circulate water through heat exchange circuits to warm or cool a patient during cardiopulmonary bypass procedures that last 6 hours or less. The HCU 30 heater/cooler unit supplies temperature-controlled water for heat exchangers or hyper-hypothermia blankets. The temperature of the water can be adjusted from 1°C to 40.5°C. This MAQUET heater/cooler unit 30 features a 26-liter tank. An Internal safety system on the HCU 30 monitors the regulation to prevent the water from rising above 41.3°C.

  • High cooling capacity with its fast ice-building technique and powerful compressor.
  • A large capacity heater that incorporates precise electronic control.
  • Fast priming and automatic de-airing.

MAQUET Jostra HCU 30 Specifications


  • Size: (H x W x D) 106 x 46.5 x 52.5 cm
  • Weight Approx.: 95 kg empty, 121 kg full
  • Noise level (normal operation): 38 Lpa dB

Temperature Control

  • Control range: 1°C to 40,5°C
  • Setting resolution: 0.1°C
  • Temperature measurement accuracy: ±0.3°C
  • Temperatures display range: 0°C to 99°C

Cooling system

  • Tank volume: 26 litres
  • Initial cooling capacity: (relative 20°C) 6250 kJ
  • Continuous cooling capacity: 4270 kJ/h (1186 W)

Heating system

  • Capacity: (max. values) 3100 W (230 V), 1800 W (115 V), 1500 W (100 V)

Circulation system

  • Flow capacity, main circuit: Approx. 21.0 l/min at zero head (adjust-able)
  • Flow capacity, cardioplegia circuit: Approx. 7.0 l/min at zero head
  • Maximum pressure, main circuit: Approx. 2.4 bar (adjustable)
  • Maximum pressure, cardioplegia circuit: Approx. 0.9 bar

Power supply

  • Mains: 200-240 V/50 Hz, 220 V/60 Hz, 100-120 V / 60 Hz, 100 V/50 Hz/li>
  • Mains fuse: 16 A (230 V)
  • Power consumption: 3680 W (230 V)

Refurbished MAQUET Jostra HCU 30 Heater/Cooler Systems

Soma Tech Intl. offers Refurbished MAQUET Jostra HCU 30 heater/cooler systems up to 50% below OEM prices with the same service and warranty as new. The MAQUET HCU 30 heater/cooler unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the MAQUET heater/cooler system it’s carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on heater/cooler systems. If necessary, parts are replaced to make sure that all aspects of the heater/cooler are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Jostra HCU 30 is working like new it undergoes a special cosmetic restoration process. The Heater-Cooler Unit 30 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the MAQUET HCU 30 Heater/Cooler is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished MAQUET Jostra HCU 30 heater/cooler systems contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase MAQUET Jostra HCU 30 Heater/Cooler Systems. If you or your facility is looking to sell your MAQUET Jostra HCU 30 Heater/Cooler System, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned MAQUET Jostra HCU 30 Heater/Cooler System to Soma Tech takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!


Questions about our Heater/Cooler Systems?

Soma Tech Intl offers a wide range of heater/cooler systems. If you have any questions about any of our heater/cooler systems or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your heater/cooler systems? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us