Stryker FlowControl Arthroscopy Pump Features
The FloControl pump regulates inflow, outflow, and Pump suction at an adjustable flow rate. It does not require special cannulas. However, the Stryker Inflow/Outflow and “high flow” arthroscopic cannulas are suggested. The tube sets are easy to set up and handle. It can also be utilized as an inflow-only pump. This is appropriate for procedures that can be completed in less time as well as when there is cost-cutting inside the OR.
The FloControl pump features several methods to maximize the management of fluid in the OR. Joint icons can be programmed so that the pressure and flow rate can be changed. This is important to reach peak performance during small joint, knee, and shoulder, procedures. Moreover, it has a wash button that swiftly clears debris on the joint. The surgeon can also increase the length of wash as well as the pressure depending on the situation. Its fluid conservation feature maximizes efficiency in the OR. It also reduces costs.
Stryker Flowcontrol Arthroscopy Pump Specifications
Dimensions
- Height: 8.46 in ( 215 mm)
- Width: 12.40 in (315 mm)
- Depth: 17.72 in (450 mm)
- Weight: 38.9 lbs (13.1 kg)
Power
- Power connection<?li>
- 100–240 V~ <?li>
- Mains fuse T 4 A/250 V~
- UL recognized
- Frequency 50–60 Hz
- Max. power consumption 145 VA
- Max. current consumption
-
- 100 V: 1.4 A
- 240 V: 0.6 A
Operating Conditions
- 10 to 40°C / 50 to 104°F
- 30 to 75% rel. humidity
Storage and Transportation Conditions
- -40 to +70 °C /-40 to +158 °F
- 10 to 90% rel. humidity
Other Specifications
- Pump capacity 0.25–3.0 l/min
- Pressure range 0–150 mm Hg
- Max. suction by pressure relief 500 mm Hg
Display
- Nominal pressure 0–150 mm Hg
- Actual pressure 0–250 mm Hg
- Shaver suction 0.25- 3.0 l/min
Measuring accuracy
- Pressure measurement ±6%
- Flow measurement ±10%
Refurbished Stryker FlowControl Arthroscopy Pump
Soma Tech Intl offers Refurbished Stryker Flowcontrol Arthroscopy Pumps up to 50% below OEM prices with the same service and warranty as new. The Stryker Arthroscopy Pump is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the Stryker the Arthroscopy Pump is carefully inspected and tested by our in-house biomedical engineers who are highly skilled and certified to work on Arthroscopy Pumps. If necessary, parts are replaced to make sure that all aspects of the shaver are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Stryker Flowcontrol Arthroscopy Pump is working like new it undergoes a special cosmetic restoration process. The Arthroscopy Pump is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Pump functions and looks new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Arthroscopy Shaver is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished Stryker Flowcontrol Arthroscopy Pump contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Stryker Flowcontrol If you or your facility is looking to sell your Stryker Arthroscopy Pump, be sure to contact Soma Tech. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Stryker Arthroscopy Pump to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
