1.800.GET.SOMA (1.800.438.7662)

GE Apex Pro Telemetry

click on thumbnail to zoom

Other products by GE
Other products in Telemetry systems

Specifications

Arterial fibrillation detection

GE Apex Pro Telemetry Features

The ApexPro telemetry receiver is a new space-saving design and can be conveniently mounted to a standard network equipment rack or shelf. Configuration allows up to four quad receiver modules, for a total of 16 multi-channel telemetry receivers in one compact unit. The flexibility to add quads with four receiver channels allows the system to grow with the number of patients which are monitored telemetrically.

The multi-channel receivers are admitted through the Clinical Information Center CIC Pro. The telemetry data is processed there, stored and displayed. The telemetrically acquired ECG-data can also be displayed at a bedside monitor. The use of LAN data transfer technology allows the receiver system to be located virtually anywhere within the hospital. LED displays offer quick, easy assessment of on-line status while diagnostic ports speed troubleshooting.

Arterial fibrillation detection
3, 5, or 6 (dual V-Lead) wire sets
Electronic software calipers at the central station
1, 24, 48, or 72 hours of Full Disclosure
4-Lead simultaneous and independent arrhythmia detection
Masimo and Nellcor SpO2, blood pressure, and temperature via DinaLink and a DINAMAP vital signs monitors

GE Apex Pro Telemetry Specifications

Dimensions

Size: H x W x D: 170mm ( 6.7 in) x 325 mm (12.8 in) x 250 mm (9.8in)
Weight: 6.4 kg (14 lb)

Battery

Type: ANSI/NEDA 15A, 1.5 V AA alkaline (2 req.)
Life: 40 hours typical
Polarity: Electronic reverse polarity protection
Static withstand: Meets and exceeds IEC 801-2 second edition Shock withstand: 5 random drops from 4 ft onto tiled concrete floor Water resistance: IEC 529 IPX3 rating
Cleaning/Sterilization: Isopropyl alcohol, ammonia (diluted), Cidex®, sodium hypochlorite bleach (diluted) or mild soap (diluted). Consult operator’s manual for cleaning instructions.

Alarm & Controls

Battery integrity: Transmitted and indicated via LED
Lead fail indication: Transmitted and indicated via LED
Alarm Pause: Transmitted and indicated via LED
Graph request: Transmitted
Power on/off: Battery insertion/removal

Transmission

Frequency stability: ± 0.0001% of assigned channel frequency
Modulation: GMSK
Bit rate: 10kb/sec
Dual antenna: Formed by leadwire shield and internal microstrip antenna

ECG

Multi-channel (5- or 6-leadwire) configuration: I, II, III, Va, Vb, aVR, aVL, aVF
Leads analyzed simultaneously: Four (I, II, III and V)
Single-channel (3-leadwire) configuration: I, II or III, programmable
Heart rate detection range: 3 to 300 beats/minute
QRS detection range: 0.5 to 5 mV
Frequency response: 0.05Hz to 40Hz (-3dB)
Dynamic range: ± 5 mV (RTI)
Input offset: ± 400 mV (RTI)M
Input impedance: 15 Megaohm min differential at 10 Hz
ECG gain selection: 5, 10, 20, 40 mm/mV (RTI)
Gain accuracy: ± 5% at 15 Hz
Common mode rejection: 100 dB min at 60 Hz
Lead fail detection: DC type; indicates leadwire failed (i.e., RA, LA, LL, Va and Vb)
Pacemaker detection: ± 2mV to ± 700mV (RTI); 100 μsec to 2 msec; either polarity
Defibrillator protection: ± 5000 VDC, 360 joules into 50 ohm load
Defibrillator recovery time: Limited only by electrode recovery time. Transmitter recovers within 2 sec

Analog/Digital

A/D converter resolution: 10 bits, 9.76 μV (RTI)
Sample rate: 240 samples/sec
Serial communications: 2-9600 baud asynchronous

Operating Conditions

Ambient temperature: 0°C to 50°C (32°F to 122°F)
Relative humidity: 5% to 95% (noncondensing)

StorageConditions

Temperature: -40°C to 70°C (-40°F to 158°F)
Relative humidity: 30% to 95% (noncondensing)
Pressure: 700 hPa to 1060 hPa

Quad receiver Module

Type: GMSK digitally demodulated
UHF frequency range: 560.025 MHz to 613.975 MHz (U.S.) 420 MHz to 460 MHz (International)
Frequency step resolution: Frequency synthesized tuning to any transmit- ter. 25 kHz spacing
Frequency stability: ± 0.00015% of assigned channel frequency Demodulation: GMSK
Bit rate: 10 kb/sec
Sensitivity: 4μV (-95dBm) minimum for 1 bit error/1 million bits received

Receiver System

Capacity: 1 to 4 quad receiver modules (4 to 16 receivers)
System status indicators: 7 bicolor LEDs

Network

IEEE 802.3 compatible, physical connector via 10 Base T
Serial diagnostics: 19200 baud, 1 stop bit, 8 data bits, no parity, XON/ XOFF flow control

Power Requirements

Line Voltage: 85 to 264 VAC, 47 to 63 Hz
Power consumption: 25 watts max with 4 quad receiver units
Cooling: Free convection

More Information on the GE Apex Pro

ApexPro provides exceptional detection and analysis of patient data to help you fully and accurately monitor your patients’ status

ApexPro uses the GE EK-Pro* clinical algorithm, which processes and analyzes four independent, simultaneous ECG leads. Plus, an innovative Smart Leads Fail feature helps to reduce false ECG alarms
With GE EK-Pro, ApexPro supports advanced atrial fibrillation detection and alarming
ApexPro has the capability to monitor two V-leads on each patient
Pace detection across two vectors improves the system’s ability to see and recognize a wide variety of pacemakers
Longer operation time than the average length of patient stay (3-4 days). ECG only (110 hours with 2 AA batteries) or ECG and SpO2 (50 hours with 2 AA batteries)
The flexible design of ApexPro allows each transmitter to monitor continuously ECG and SpO2 when needed

Innovative Parameter Technology

GE EK-Pro* four lead arrhythmia analysis provides detection of lethal and advanced atrial fibrillation detection and alarming. Early and accurate identification of AFib may help prevent this arrhythmia from becoming chronic.
Dual V-lead monitoring allows caregivers to be vigilant for both arrhythmias and ST segment changes through a better picture of the patient’s heart.
Dual vector pace detection ensuring an accurate pace detection

Excellent infrastructure technology

Flexible: GE delivers “coverage area” rather than “infrastructure equipment” and can scale to cover up to 28.000 m2
The ApexPro telemetry infrastructure is custom designed for your unique RF environment meeting the specific RF regulatory requirements within your country and facility
Scalable: ApexPro and the CARESCAPE network can accommodate up to 438 CARESCAPE telemetry T4 transmitters in one installation but is limited by the number of RF frequencies available for medical telemetry usage in a specific country and hospital.
ApexPro operates within the Frequency Range: 420.025 to 459.975 MHz.
Dependable: Quad-diversity antenna infrastructure searches four separate antenna fields each second for the best signal from each patient

Questions about our telemetry systems?

Soma Technology, Inc offers a wide range of telemetry systems . If you have any questions about any of our telemetry systems or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.