Philips IntelliVue MX40

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

Philips IntelliVue MX40 Features

The Philips Intellivue MX40 is a lightweight patient monitor. The IntelliVue MX40
is a compact monitor that patients can wear. This allows the patient to be able to move freely while still continuously monitoring them. The Patient monitor can provide readings of various parameters including; EKG, HR, SpO2, pulse, ST, QT, Respiration, and blood pressure. The Philips system runs on AA batteries or a single rechargeable Philips battery. The system can transmit the reading wirelessly to an information center at your medical facility. The durability of the monitor makes it easy to clean and disinfect after each use.

  • Easy for clinicians to use and comfortable for patients to wear.
  • 2.8” color, touchscreen display.
  • A smart, multi-measurement cable system is available with reusable and single-patient-use supplies.
  • FAST SpO2 (Continuous, automatic, or manual measurement)
  • Standard, EASI, or Hexad ECG lead system selection.
  • Communication with IntelliVue Patient Monitors and Cableless Measurements via a short-range radio connection.
  • Powered by three AA batteries or rechargeable lithium-ion battery pack.

Philips IntelliVue MX40 Specifications

Dimensions

  • Height: 4.99” (12.7 cm)
  • Width: 2.75” (7 cm)
  • Depth: 1.24” (3.2 cm)
  • Weight (Without Batteries): 8.5 oz (240 g)

Battery

  • Lithium-ion battery pack or 3 AA batteries
  • Charge Time: 6.5 Hours (Lithium-ion battery)

Display

  • Type: 2.8” QVGA Color LCD
  • View Area: 1.7” x 2.3” (4.3 cm x 5.8cm)
  • Resolution: 240 x 320
  • Backlit: White LED

Environmental

  • Temperature
    • Operating: 23 to 99°F ( 0 to 37°C)
    • Storage: -22 to 122°F (-30 to 35°C) without batteries
  • Humidity
    • Operating: < 95% RH at 98.6°F (37°C)
    • Storage: < 90% RH at 122°F (50°C)
  • Altitude
    • Operating & Non-operating: 9,842 ft (3,000 m)
    • Barometric Pressure: 537 mmHg (72 kPa)

ECG

  • Lead Wires: 3, 5, or 6-wire patient cable compatible with IntelliVue Patient Monitor, AAMI/IEC color codes
  • Resolution: 5µV
  • ECG Input: Differential, defibrillator protected against 360 joules discharge into a 100-ohm load
  • Input Impedance: > 5 megohms (@ 10 Hz
  • Input Dynamic Range: +/- 9 mV
  • DC Offset Range: +/- 320 mV
  • CMRR: = 90 dB @ 50, 60 Hz

FAST SpO2

  • Lead Wires: 3, 5, or 6-wire patient cable compatible with IntelliVue Patient Monitor, AAMI/IEC color codes
  • Resolution: 5µV
  • ECG Input: Differential, defibrillator protected against 360 joules discharge into a 100-ohm load
  • Input Impedance: > 5 megohms (@ 10 Hz
  • Input Dynamic Range: +/- 9 mV
  • DC Offset Range: +/- 320 mV
  • CMRR: = 90 dB @ 50, 60 Hz

Refurbished Philips IntelliVue MX40 Patient Monitor System

Soma Technology, Inc. offers Refurbished Philips IntelliVue MX40 Monitor up to 50% below OEM prices with the same service and warranty as new. The Philips Monitor is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the Philips IntelliVue, the patient Monitor system is carefully inspected and tested by our in-house biomedical engineers who are highly skilled and certified to work on the Philips Intellivue MX40 Patient Monitor. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Philips Patient Monitor system is working like new, it undergoes a special cosmetic restoration process. The Monitor is cleaned, minor scratches and dents are repaired and painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the patient Monitor is labeled patient-ready and packed up for shipment, it goes through one last quality control test to ensure all aspects are working as they should. If you are looking to buy a refurbished Philips IntelliVue MX40 Patient Monitor contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Technology, Inc. is also actively looking to purchase an IntelliVe MX40 Monitor. If you or your facility is looking to sell your Philips, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Philips Patient Monitor to Soma Technology removes the middleman in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.

Banner

Questions about our Patient Monitors?

Soma Tech Intl offers a wide range of patient monitors. If you have any questions about any of our patient monitors or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your patient monitors? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us