GE OEC Elite MiniView

Quotes in less than 24 hours Download Specifications

GE OEC Elite MiniView Features

The GE OEC Elite MiniView is a min C-arm that is a lightweight system that is easy to maneuver. The MiniView comes with GE’s Smart lock system, with one button the cart can be locked into position, preventing drifting. With its dual large displays, you can simultaneously view High-quality images on the LCD flat screens.

  • The smart lock system locks the joints and eliminates drifting concerns – with one button
  • you can view detailed, full-sized dual images without straining<?li>
  • The larger field of view allows you to focus on the relevant areas needed for the images.
  • You can optimize the image quality, even with the introduction of metal objects into the X-Ray field, with the GE OEC Smart Metal
  • No Geometric distortion or curving at the detector edge, even in the presence of devices with magnetic fields

GE OEC Elite MiniView Specifications

X-Ray System

  • X-Ray Tube: Compact Monoblock
  • Focal Spot: .033mm
  • Generator: 12.8W
  • kVP range: 40 – kVp
  • mA range: 0.02 – 0.16 mA
  • maximum output: 0.16mA 80kVp
  • Dose Rate Calculation: AKR/DAP

Imaging System

  • Detector: CMOS flat detector
  • FOV Size: 4” (10 cm) Mag, 5”(13cm) Normal
  • Detector size (resolution): 1.3 k x 1.3 k pixels
  • pixel size (space): 100 microns
  • DQE: (0) – 70%

Viewing System

  • Monitors: Dual Medical 19” (48 cm), Monochromatic LCD, Anti-glare panels
  • Monitor Resolution: 1280 x 1024 pixels
  • Display image: primary live image, 11.4” (29 cm) diameter
  • Image size: 1.3k x 1.3k 16 bit image, 1k x1k display image
  • Tilt Motion: 10° up / 10°down
  • Swing + Swivel rotation Motion: 180° + 270°
  • Viewing Angle:170° horizontal & vertical
  • Max Panel brightness: 1400Cd/m2
  • Max Contrast Ratio: 1000:1
  • Touch Screen: right monitor

Imaging Features

  • Annotation/Measurements
  • Smart Metal
  • Detects metal in the field and optimizes image quality
  • AutoTrak
  • Automatically seeks anatomy anywhere in the field and selects the optimal technique
  • Zoom-Roam
  • Auto X-Ray Technique Control
  • Edge Enhancement
  • Last Image Hold
  • Auto-save/Auto swap
  • Configurable
  • Noise Reduction
  • Motion Artifact Reduction
  • Flip/Invert

Electrical

  • Backup Battery
  • Input Power (60/50 Hz):100/110/115/120/127VAC @ 4.5A, 200/220/230/240VAC @ 2.3A
  • Auto Power Sensing

Data Management & Connectivity

  • WaterResistantKeyboard/li>
  • Removable Storage: USB/li>
  • Hard Drive Storage: 100,000 images/li>
  • Printer: Optional/li>
  • DICOM (3.0): MPPS, RDSR – Radiation Dose Structured Report, Query and Retrieve, Modality Worklist, Print, Storage, Storage Commitment/li>
  • Wireless DICOM – optional/li>
  • Wireless Frequency – 2.4G, 5G

Regulatory Compliance

  • IEC60601-1
  • U.S.21CFRSubchapterJ

 

Refurbished The GE OEC Elite MiniView C-Arm

Soma Tech Intl offers the GE OEC Elite MiniView C-Arm up to 50% below OEM prices with the same service and warranty as new.The GE C-arm is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Elite MiniView, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on C-Arms. If necessary, parts are replaced to make sure that all aspects of the sequential compression devices are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the GE MiniView is working like new it undergoes a special cosmetic restoration process. The MiniView is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the GE Elite MiniView is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished GE OEC Elite MiniView C-arms contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase G Elite MiniView C-arms If you or your facility is looking to sell your C-arms, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned GE C-arms takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.

Banner

Questions about our Mini C-Arms?

Soma Tech Intl offers a wide range of mini C-arms. If you have any questions about our mini C-arms or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your mini C-arms? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us