Orthoscan FD-OR Mini C-Arm

Quotes in less than 24 hours Download Specifications

Orthoscan FD-OR Features

The Orthoscan FD-OR Mini C-arm is designed with flat Detection. The flat detection allows for the mini c-arm to be in the operating room and can be placed directly on the operating surface to reduce time and increase efficiency. The FD-OR has an orbital rotation of 150°. The Orthoscan FD delivers high-resolution images with an increased level of grayscale to improve diagnostic accuracy. Additionally, there is a surgical LED light located on the bottom of the tube head – making it easy to eliminate shadows that might be cast from the c-arm.

  • kV Range: 40 – 78kVp
  • mA Range: 0.04 – 0.160mA
  • 2 k x 1.5 k Image Resolution
  • 15.0 cm x 12.0 cm Field Of View
  • Greater arc depth of 19.2″
  • Frames per second range: 30M
  • Viewing area: 167 cm2 (versus 165 cm2 II)
  • Lack of geometric distortion
  • More X-ray information in the image
  • Stores 8,000 images on the unit
  • Small and Lightweight

Orthoscan FD-OR Specifications

Dimensions

  • Weight: 400 lb
  • Height: 44.5”
  • Footprint (W x L): 27” x 33”

C-Arm

  • Free Space: 13.8”
  • Arc Depth: 19”
  • Pivot: 430°
  • Lateral Rotate (Wig-Wag): 320°
  • Orbital Rotate: 150°
  • Vertical Range: 34”
  • Distance to Cabinet: max 68”
  • Distance to Wheel Base: max 45”

Detector

  • Detector Resolution: 2 k x 1.5 k
  • Detector Size: 15.0 cm x 12.0 cm
  • Useful Array: 15.0 cm x 12.0 cm
  • Pixel Spacing: 75 microns
  • Dose Rate: AKR, DAP

X-Ray Monoblock

  • Focal Spot: 50 microns
  • kV Range: 40 – 78 kVp
  • mA Range: 0.04 – 0.160 mA

Imaging

  • Surgical LED Lights: Yes
  • Sterile Field Controls: Bilateral
  • Start-Up Time: 30 sec
  • Temporary Image Hold: 512 images
  • Cine Loop Frame Rate: 30 fps
  • Snapshot Capabilities: Yes
  • Edge Enhancement: Yes
  • Post Process Brightness/Contrast: Yes
  • Adaptive Noise Suppression: Automatic
  • Manual Noise Suppression: 4 Modes
  • Laser Alignment: Yes
  • Multifunction Wireless Foot Switch: Capable

Refurbished The Orthoscan FD-OR Mini C-arm

Soma Tech Intl offers the Orthoscan FD Mini C-Arm
up to 50% below OEM prices with the same service and warranty as new. The FD-OR is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Orthoscan C-arm, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on C-arms. If necessary, parts are replaced to make sure that all aspects of the sequential compression devices are to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Orthoscan Mini C-arm is working like new it undergoes a special cosmetic restoration process. The FD C-arm is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Orthoscan FD-OR Mini C-Arm is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Orthoscan FD Mini C-Arm contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is actively looking to purchase Orthoscan c-arms If you or your facility are looking to sell your FD Mini C-arm, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Orthoscan Mini C-Arms takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Techn Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.

Banner

Questions about our Mini C-Arms?

Soma Tech Intl offers a wide range of mini C-arms. If you have any questions about our mini C-arms or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your mini C-arms? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us