GE Datex Ohmeda S/5 7100 Aespire

24-Hour Quotes

Pricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications

GE Datex Ohmeda Aespire 7100 Features:

The GE Datex Ohmeda Aespire 7100 is a compact anesthesia machine. The Aespire is equipped with a fully integrated workstation, with a large workspace and connections for additional O2 and suction control. Additionally, the anesthesia machine can be connected to the GE Datex Ohmeda S/5 Monitor for additional monitoring parameters. The Aespire features the latest technology in the Advanced Breathing Systems (ABS). There are fewer tubes to connect which reduces the risk of potential leaks and misconnections, improving the patient’s safety.

Soma Tech Intl offers two different ventilator options in the GE Datex Ohmeda S/5 Anesthesia Machine. The GE Aespire can either have a 7100 ventilator or a 7900 ventilator. Both of these ventilators are microprocessor-based, electronically controlled, and pneumatically driven. The S/5 Aespire’s ventilators have built-in monitoring for inspired oxygen, airway pressure, and exhaled volume. These ventilators are designed to be used to aid in the delivery of anesthesia and are part of the GE Datex Ohmeda S/5 Aespire anesthesia machine.

7100 Ventilator Safety Features

  • Dual redundant airway overpressure protection.
  • Volume over-delivery limits and protection.
  • Proprietary hose connections and fixed manifolds.
  • 10 VA electrical power limiting to the potential oxygen-enriched environment.
  • 150 psi burst overpressure protection.

Ventilator Monitoring Boards

The 7100 ventilator is accompanied by a Ventilator Monitoring Board (VMB) which serves as the interface between the ventilator’s control board and the breathing system sensors and switches. It passes different switch functions through to the ventilator control module and provides power to the task light. Respiratory gas flow, to and from the patient, is monitored by measuring the differential pressure across a variable orifice in each flow sensor. The pressure transducers measure the differential pressure on the VMB.

Ventilator Batteries

The 7100 ventilators on the S/5 Aespire have a sealed lead acid battery that is only used as backup power in case of power failure. The batteries will power each unit for about 30 minutes.

GE Datex Ohmeda S/5 Aespire 7100 Anesthesia Machine Features

  • Power-up is quick and easy in your fast-paced environment.
  • Minimum 02 flow of 50 mL available with dual flow tubes, ensures accuracy in low flow situations.
  • Enhanced hose and cable management reduces disconnects and clutter.
  • Lightweight and compact for easy maneuverability.
  • Larger work surface for supplies and chart.
  • Two large drawers provide more storage.
  • Removable drawer inserts conveniently store small items.
  • Smooth, durable surfaces for cleaning ease.

GE Datex Ohmeda Aespire 7100 Specifications

Dimensions

  • Height: 52.9 in (134.5 cm)
  • Width: 28.3 in (72 cm)
  • Depth: 28.7 in (73 cm)
  • Weight: 238lbs (108 kg

top Shelf

  • weight limit 75 lbs (34kg)
  • Width: 26 in (66 cm)
  • Depth:15.75 in (40 cm

Work Surface

  • Height: 32.2 in (81.7 cm)
  • Size: 334 in-2 (2160 cm)

DIN Rail

  • Side of Machine: 13.6 in (34.5 cm)

Drawers (internal dimensions)

  • Height: 6.9 in (17.5 cm)
  • Width: 13 in (33 cm)
  • Depth: 10.4 in (26.5 cm)

Absorber Bag Arm (optional)

  • Arm Length: 12 in (30.5 cm)
  • Bag arm height (adjustable): 34.3 to 40.9 in (87 to 104 cm)

Electrical

  • Current Leakage: 100/120 V: < 300µA
  • Power input: 100-120 Vac, 50/60 Hz
  • Power Cord: Length: 5m/16.4 ft
  • Rating: 15A @ 120 Vac

Operating Environmental Conditions

  • Temperature: 10° to 40°C/50° to 104°F
  • Humidity: 15 to 95% relative humidity
  • Altitude: –440 to 3565 m/500 to 800 mmHg

Storage Environmental Conditions

  • Temperature: -15° to 50°C/-5° to 122°F
  • Humidity: 10 to 95% relative humidity (including condensing) per IEC 68-2-3
  • Altitude: -440 to 3565 m/500 to 800 mmHg
  • Oxygen cell storage: -15° to 50°C/5° to 122°F; 10 to 95% relative humidity; 500 to 800 mmHg

Cost savings:

  • Only one scheduled maintenance check per year.
  • Tec® 7 vaporizers are planned factory service free.
  • Low flow anesthesia supported.

Refurbished GE Datex Ohmeda S/5 Aespire 7100 Anesthesia Machine

Soma Tech Intl offers GE Datex Ohmeda S/5 Aespire 7100 up to 50% below OEM prices with the same service and warranty as new. The GE Datex Ohmeda S/5 Aespire 7100 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the S/5 Aespire 7100, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on an Anesthesia machine. If necessary, parts are replaced to make sure that all aspects of the anesthesia machine are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the GE Datex Ohmeda S/5 Aespire 7100 is working like new it undergoes a special cosmetic restoration process. The GE Datex Ohmeda S/5 Aespire 7100 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the GE Datex Ohmeda S/5 Aespire 7100 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished GE Datex Ohmeda S/5 Aespire 7100 anesthesia machines contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a GE Datex Ohmeda S/5 Aespire 7100. If you or your facility is looking to sell your GE Datex Ohmeda S/5 Aespire, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned GE Datex Ohmeda S/5 Aespire 7100 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

Banner

Questions about our Anesthesia Machines?

Soma Tech Intl offers a wide range of anesthesia machines. If you have any questions about any of our anesthesia equipment or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your anesthesia machines? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us