ENGLISH 
Español
Steris V-PRO maX 2
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
Steris V-PRO maX 2 Features
The Steris V-Pro maX 2 is a low-temperature sterilization system that uses VAPROX HC Sterilant. It properly prepares (cleans, rinses, and dries) medical devices in healthcare facilities. V-Pro max 2 comes with preprogrammed sterilization cycles that operate at low pressures and temperatures for processing medical devices without leaving toxic residues.
- Large, easy-to-use touchscreen control panel.
- Proprietary hydrogen peroxide-based sterilant.
- Process monitoring and cycle documentation.
- Specially designed conditioning phase that aids in the removal of residual moisture.
- Easy installation.
Steris V-PRO maX 2 Specifications
General
- Chamber Volume (ft3): 4.3 (136L)
- Cycle Time: 16 Fast non Lumen; 28 Non Lumen; 52 Lumen; 35 Flexible
- Moisture Check: Automatically included in cycle time
- Fast BI: 20 minutes
- Cycles per Sterilant Container: 15 Cycles (or 30 for Fast Non Lumen Cycle)
- H2O2 Concentration: 59%
- Plasma: No
- Compatible Materials: 40
- Configurations: Single Door or Double Door
- Laparoscopy Trays per Shift: 68
- Connect to Tracking Systems: Yes
Device Configurations
- Single-channel
- Stainless Steel: = 0.77mm x = 500mm
- Flexible: = 1mm x =1050mm (Max 2 per load)
- Dual-channel
- Stainless Steel: = 0.77mm x = 527mm
- Flexible: = 1mm x = 990/850mm (Max 2 per load)
- Triple-channel: Stainless Steel =1.2mm x = 275mm; = 1.8mm x = 310mm; = 2.8mm x 317mm
- Flexible Plus Load: 1 Scope (single or dual) and non-lumened load for a total of 24 lbs.
- Max Lumens/Load: 20
Refurbished Steris V-PRO maX 2 Sterilizer
Soma Tech Intl offers Steris Reliance VisionSteris V-PRO maX 2 sterilizers up to 50% below OEM prices with the same service and warranty as new. The Steris V-PRO maX 2 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Steris V-PRO maX 2, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on sterilizers. If necessary, parts are replaced to make sure that all aspects of the Steris V-PRO maX 2 are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Steris V-PRO maX 2 is working like new it undergoes a special cosmetic restoration process. The Steris V-PRO maX 2 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Steris V-PRO maX 2 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Steris V-PRO maX 2 sterilizers contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Steris V-PRO maX 2. If you or your facility is looking to sell your Steris V-PRO maX 2, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Steris V-PRO maX 2 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
