Bovie Surgi Center Pro
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included. Download Specifications
Bovie Surgi Center Pro Features
The Bovie Surgi Center Pro is a 200-watt high power, operating room generator, by Bovie®. The unit incorporates the power and safety of a premium OR generator at significant savings to the medical facility. The system delivers 12 monopolar and bipolar RF energy modalities to provide a high level of surgical precision. The Surge-Center Pro ESU offers Pure Cut, four (4) modes of Blend, three (3) modes of Coagulation, Bipolar Coagulation, and Bovie FCFS™ technology allowing the Doctor to move almost effortlessly from Monopolar to Bipolar during the procedure.
- Enough power to perform any procedure in a surgery center and most Hospital OR procedures
- The highest in safety and quality were built into a 200-watt generator for maximum reliability with economy
- Specialized Laparoscopic Mode
- Dual Monopolar Spray Activation
Bovie Surgi Center Pro Specifications
Dimensions
- Height: 6.5 In (16.5 cm)
- Width: 14.75 In (37.5 cm)
- Depth: 18.1 In (46 cm)
- Weight: < 20 lbs (< 9.07 kg)
Operating Parameters
- Ambient temperature range 10° to 40° C <?li>
- Relative humidity 30% to 75%, non-condensing
- Atmospheric pressure 70kPa to 106kPa
- Warm-up time If transported or stored at temperatures outside the operating temperature range, allow one hour for the generator to reach room temperature before use.
Transport
- Ambient temperature range -40° to +70° C
- Relative humidity 10% to 100%, including condensation
- Atmospheric pressure 50kPa to 106kPa
Storage
- Ambient temperature range 10° to 30° C
- Relative humidity 30% to 75%, non-condensing
- Atmospheric pressure 50kPa to 106kPa
General
- Audible/Visible Output Meter: Yes
- Contact Monitoring Systems: BovieNEM
- Contact Monitoring Systems
- Range/Trip Point: 10 ohms or less over entire
- operating range (10C° to 40°C)
- Cooling System: Passive Cooling
- Technology: Isolated RF Output
- Pre-set Feature: Yes
- Monopolar HP Ports: 2
- Dual Activation Tone Alert: Yes
- Connector Ports/Power Switch: White
Bipolar
- Macro Bipolar
- Watts: 80
- VPeak Max Voltage: 600V
- Crest Factor (Typical): 1.5 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Micro Bipolar
- Watts: 80
- VPeak Max Voltage: 500V
- Crest Factor (Typical): 1.5 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Standard Bipolar
- Watts: 50
- VPeak Max Voltage: 250V
- Crest Factor (Typical): 1.5 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
Monopolar
- Cut I
- Watts: 200
- VPeak Max Voltage: 1000V
- Crest Factor (Typical): 1.7 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Cut II
- Watts: 200
- VPeak Max Voltage: 750V
- Crest Factor (Typical): 1.7 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Blend (1)
- Watts: 200
- VPeak Max Voltage: 1320V
- Crest Factor (Typical): 1.8 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Blend (2)
- Watts: 200
- VPeak Max Voltage: 1475V
- Crest Factor (Typical): 2.0 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Blend (3)
- Watts: 200
- VPeak Max Voltage: 1650V
- Crest Factor (Typical): 2.2 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Blend (4)
- Watts: 200
- VPeak Max Voltage: 1870V
- Crest Factor (Typical): 2.4 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Pinpoint Coagulation
- Watts: 120
- VPeak Max Voltage: 1800V
- Crest Factor (Typical): 3.1 ± 20%
- Frequency: 490 kHz ± 4.9 kHz
- Spray Coagulation
- Watts: 120
- VPeak Max Voltage: 4000V
- Crest Factor (Typical): 6.0 ± 20%
- Frequency: 350 to 450 kHz
- Gentle Coagulation
- Watts: 120
- VPeak Max Voltage: 450V
- Crest Factor (Typical): 1.6 ± 20%
- Frequency: 490 kHz ± 4.9 kHz