Medtronic Valleylab FT10 Energy Platform

Quotes in less than 24 hours

Medtronic Valleylab FT10 Energy Platform Features

The Medtronic Covidien Valleylab FT10 energy platform delivers precise amounts of energy with improved performance for faster sealing and cutting times. The Built-in smart TissueFect, on the Covidien FT10, is a tissue sensing technology that improves the speed and consistency of current hand-held devices by reading tissue composition in real-time. TissueFect, on the Valleylab FT10, examines device performance 434,000 times per second, monitoring tissue impedance and allowing effective and efficient energy delivery. The Medtronic FT10 provides RF energy for monopolar and bipolar surgical applications as well as tissue-fusion and vessel-sealing applications. The Touchscreen is divided into four sections for user input and viewing capabilities. This Energy Platform (VLFT10GEN) will automatically detect coded handsets and configure the energy platform accordingly. Medtronic Valleylab offers a variety of Electrosurgical units, such as the Medtronic Covidien Valleylab Force Triad.

  • 50% faster sealing times
  • Lower jaw temperatures
  • Auto bipolar has a faster activation time
  • Monopolar performance is improved
  • Power by smart generators that manage every energy delivery
  • Improves all surgical applications

Medtronic Valleylab FT10 Energy Platform Specifications

Physical Specifications

  • Height: 6.7″ (17 cm)
  • Width: 14.1″ (35.8 cm)
  • Depth: 18.2″ (46.25 cm)
  • Weight: 22.3 lbs. (10,1 kg)


  • Faster sealing times: (1-4 seconds vs. 3-6 seconds with ForceTriad™)
  • Lower max jaw temperature
  • Automatic power settings require minimal setup and minimize the need for further handling during surgery
  • Simple, intuitive controls and information displays

New ES Settings

  • Soft coag

TissueFect Tissue Sensing Technology

  • Reads tissue: 434,000 times per second

Bipolar Cable Compensation

  • Reads cable length and width for consistent electrosurgical output
    • Low
      • Power Setting Ranges: Off, 1–15 W
      • Peak Voltage: 133 V
    • Medium
      • Power Setting Ranges:16–40 W
      • Peak Voltage: 214 V
    • High
      • Power Setting Ranges: 45–95 W
      • Peak Voltage: 462 V

Upgradeable Software

  • Ethernet connection (Has WiFi capabilities that are not yet enabled)


  • Output configuration: Isolated output
  • Cooling: Natural convection and fan
  • Display: 7 in. LCD touchscreen
  • Connector Receptacles: LED illuminated connector readers on the LigaSure/Bipolar receptacle
  • Enclosure: Magnesium
  • Operating System: Linx

Environmental Parameters

  • Operating Temperature: 50 to 104 °F (10 to 40 °C)
  • Operating Humidity: 30% to 75% non-condensing
  • Operating Atmospheric Pressure: 700 to 1060 millibars
  • Transport and Storage Temperature: 14 to 140 °F (-10 to +60 °C)
  • Transport and Storage Humidity: 25% to 85% non-condensing
  • Transport and Storage Atmospheric Pressure: 500 to 1060 millibars

Internal Memory

  • Storage Capacity: 8 GB

Input Power

100-127 VAC

  • Line Voltage Full Regulation Range: 90–140 VAC
  • Line Frequency: 47-63 Hz
  • Max VA Nominal Line Voltage: 950 VA
  • Max Mains Current: 9.5 ARMS
  • Max Heat Dissipation: 180 W

220-240 VAC

  • Line Voltage Full Regulation Range: 198-264 VAC
  • Line Frequency: 47–63 Hz
  • Max VA Nominal Line Voltage: 950 VA
  • Max Mains Current: 4.8 ARMS
  • Max Heat Dissipation: 180 W


  • Touch Current: < 100 µA NC, < 500 µA SFC
  • Earth Leakage Current: < 500 µA NC, < 1000 µA SFC
  • Patient Auxiliary Current (< 1kHz): < 10 µA NC, < 50 µA SFC
  • Patient Auxiliary Current (> 1kHz): Scaled with frequency per IEC 60601-1:2012, but does not exceed 10mA NC/SFC
  • Patient Leakage Current: < 10 µA NC, < 50 µA SFC
  • Total Patient Leakage Current: < 50 µA NC, < 100 µA SFC

Refurbished Medtronic Valleylab FT10 Electrosurgical Units

Soma Tech Intl offers the Valleylab FT10 Electrosurgical Units up to 50% below OEM prices with the same service and warranty as new. Soma Tech technically and cosmetically refurbishes these Medtronic Valleylab electrosurgical units back to the original engineering manufacturer specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the Valleylab FT10 Electrosurgical Units are in working order, the electrosurgical units are calibrated back to OEM specifications, to make sure they work exactly the way they did when they originally left the manufacturer. Soma Tech not only refurbished the product, but each unit also goes through a Special cosmetic restoration process. The Valleylab FT10 is cleaned and minor scratches and dentures are repaired, and decals are replaced if necessary.

Soma Tech Intl also purchases used and pre-owned Valleylab FT10s’ s. If you or your facility wants to sell your surgical tables, Soma Technology has an experienced purchasing department that makes the process headache and hassle-free. When selling your Medtronic Valleylab FT10 to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech not only buys electrosurgical units but also buys a wide variety of different medical equipment if your medical facility is looking to free up space. If you have medical equipment you would like to sell to Soma, send us a message here!


Questions about our Electrosurgical Units?

Soma Tech Intl offers a wide range of electrosurgical units. If you have any questions about any of our electrosurgical units or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your electrosurgical units? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us