ENGLISH 
Español
Steris Gi 4000
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
GI 4000 Features
The GI 4000 electrosurgery unit is specifically designed for flexible endoscopy and incorporates monopolar, bipolar, and avage functions in one compact unit. It offers argon coagulation, two pulse cut modes for sphincterotomy, true gastrointestinal (GI) bipolar capabilities, TouchSoft® coagulation, and various options for polypectomy. Additionally, it supports Endoscopic Mucosal Resection (EMR), Endoscopic Submucosal Dissection (ESD), and Peroral Endoscopic Myotomy (POEM).
- An intuitive touch screen that allows you to select modalities and conduct thermal therapies with easy setup instructions on every screen
- Advanced tissue sensing and automatic output control ensure consistent results in tissue analysis.
- All outputs are designed for endoscopy procedures, and the automatic power delivery system is specifically crafted for endoscopic use.
- The ArC Smart argon coagulation system is designed to ensure precise beam and energy delivery.
- Touchsoft Coagulator monopolar probe is designed for contact coagulation or tissue ablation.
GI 4000 Specifications
Dimensions
- Width: 19.5″ (49.5 cm)
- Height: 7″ (17.8 cm)
- Depth: 18″ (45.7 cm)
- Weight: 27.5 (12.5 kg)
Environmental Transport and Storage Parameters
- Temperature: -40 to 158°F (-40 to 70°C)
- Humidity: 10% to 95% non-condensing
- Atmospheric Pressure: 14.8 to 31.3 in Hg (500 to 1060 hPa)
- Acclimation: If the gi4000 ESU has been stored or transported at temperatures below 50 to 104°F (10 to 40°C), the unit will require approximately three (3) hours to acclimate at room temperature 59 to 77°F (15 to 25°C) before use.
Power Input
- Characteristics Input Mains Voltage, Full Regulation: 100-240 V~
- Mains Line Frequency Range (Nominal): 50-60 Hz
- Input Mains Current:
- 100 V~ 5.0A
- 120 V~ 4.0A
- 240 V~ 2.0A
Power Output
General Output Characteristics
- All modes (output variation as a function of line voltage variations): Less than -+5%
- Maximum Output Power (Cut Mode into 500 ohms): 240W
- Output Frequency Range: 315-550 kHz
- Maximum Output Peak Voltage (Open Circuit ARGON Mode): 4750V
Leakage
Low Frequency (50-60 Hz) Leakage Current
- Chassis to Neutral Line
- Polarity to Nominal (Ground Open): < 150 µA
- Line Polarity Reversed (Ground Open): < 150 µA
- Patient Leads to Neutral (All RF Active and Patient Plate)
- Line Polarity to Nominal (Ground Open): < 10 µA
- Line Polarity Reversed (Ground Open): < 150 µA
Radio Frequency (RF) Leakage Current
- Monopolar Method (All Modes at Maximum Power Setting)
- Patient Plate to Ground: < 150 µA
- Active to Ground: < 150 µA
- Bipolar Method (Maximum Power Setting)
- Each Lead to Ground: < 54 µA.
Duty Cycle
- Generator power is continuously ON when the unit is powered ON. All modes under maximum power settings and rated load conditions (monopolar modes: 500Ω, bipolar mode: 100Ω) have an output activation time of 10 sec ON / 30 sec OFF.
Argon
- Roboust arc length without sacrificing limited tissue depth
- Small argon gas canister included
- Quick ignition
Monopolar
- Touchsoft coagulation: low voltage for gente, depth-limited coagulation
- Coag: standard snare polypectomy
- Pulse blend cut: controlled cutting with adequate hemostasis
- Blend Cut: controlled cutting but not fractionated
- Pulse Cut: controlled pulsed cutting for minimal coag
- Cut: Constant maximum cut, minimum coagulation.
Bipolar
- GI/Endo Bipolar
Lavage
- Always ready
- Pump with adjustable flow rates
GI 4000 Refurbishment Process
Soma Tech Intl offers the Steris Gi 4000 electrosurgical unit up to 50% below OEM prices with the same service and warranty as new. The Gi 4000 units are not only technically refurbished but also cosmetically refurbished to make them work and look like new. When the refurbishing process starts on the Gi 4000, it is carefully inspected and tested by our in-house biomedical engineers, who are highly skilled and certified to work on electrosurgical units. If necessary, parts are replaced to ensure that all aspects of the Steris Gi 4000 meet the original manufacturer’s specifications. This ensures that the unit operates as it did when it originally left the manufacturer. After the electrosurgical unit is fully restored, it undergoes a cosmetic restoration process. The unit is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are applied if necessary. After this meticulous refurbishing process, the unit functions and looks new. Soma Tech Intl is ISO 13485 certified, guaranteeing the highest quality for all capital medical equipment sold. Before the Steris Gi 4000 is labeled patient-ready and packed for shipment, it undergoes a final quality control test to ensure all components are working as intended. If you are looking to buy a refurbished Steris Gi 4000 electrosurgical unit, contact Soma at [email protected] or call us at 1-800-438-7662.
Soma Tech Intl is actively looking to purchase Steris Gi 4000 electrosurgical units. If you or your facility is looking to sell your Gi 4000, be sure to contact Soma Tech Intl. Soma’s experienced purchasing department will guide you through the entire process. Selling your used or pre-owned electrosurgical unit directly to Soma cuts out the middleman, ensuring that your medical facility receives top dollar for your equipment. Soma is 100% HIPAA compliant and guarantees that your equipment arrives at our facility in the same condition it left yours. Soma Tech Intl also offers trade-in credit for your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here.
