ENGLISH 
Español
Olympus OER-Pro
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Download Specifications
Olympus OER-Pro Features
The Olympus OER-Pro endoscope reprocessor is designed to support automated cleaning and high-level disinfection of heat-sensitive flexible endoscopes and their accessories. Built to promote consistent reprocessing results, the system combines automated cycles with the ability to perform modified manual cleaning prior to full disinfection. Its intuitive interface allows users to easily select, monitor, and manage reprocessing cycles, helping streamline workflow in endoscopy and sterile processing departments. The OER-Pro is engineered to work with validated detergents and high-level disinfectants, supporting compatibility and effective performance across Olympus endoscopes. With a focus on safety, reliability, and efficiency, the system helps facilities maintain proper reprocessing protocols while reducing manual handling.
Automated Cleaning and Disinfection: Performs validated cycles for consistent high-level disinfection of compatible endoscopes and accessories.
Pre-Cleaning Flexibility: Supports modified manual cleaning prior to automated processing for improved reprocessing outcomes.
User-Friendly Operation: Clear interface allows staff to easily control, monitor, and manage reprocessing cycles.
Workflow Efficiency: Reduces manual handling while supporting consistent turnaround.
Olympus OER-Pro Specifications
Dimensions & Weight
- Height: 38.5 in (97.7 cm)
- Width: 17.7 in (45 cm)
- Depth: 29.7 in (75.5 cm)
- Weight (Dry): 264.6 lb (120 kg)
Compatibility & Capacity
- Compatible Scopes: Olympus flexible endoscopes
- Number of Endoscopes per Cycle: Up to 2 (1 with certain models)
- Note: The OER-Pro does not sterilize endoscopes. Endoscopes requiring sterilization must be sterilized separately according to manufacturer instructions.
Cleaning & Disinfection Performance
- Cleaning Methods:
- Exterior: Ultrasonic cleaning and turbulent bath
- Channels: Fluid flushing
- Valves: Ultrasonic cleaning and fluid flushing
- Disinfection Methods:
- Exterior: Disinfectant immersion
- Channels: Disinfectant flushing and filling
- Valves: Disinfectant immersion
- Cleaning Time: 3–10 minutes (adjustable in 1-minute increments)
- Disinfection Time:
- Concentrated solution: 7 minutes
- Ready-to-use solution: 10 minutes
- Disinfectant Temperature: 68°F (20°C), automatically heated if below setpoint
Solution & System Capacity
- Reprocessing Basin Capacity: Approx. 3.7 gallons (14 L)
- Disinfectant Tank Capacity: Approx. 4.6 gallons (17.5 L)
- Disinfectant Solution: Olympus-validated disinfectant
- Detergent: Olympus-validated detergent
System Features
- Leak Detection: Visual bubble detection during immersion
- Alcohol Flushing: Automatic flushing and draining using pump and compressor
- Water Discharge: Pump-assisted floor draining
- Disinfectant Discharge: Hose or drain connection
Electrical Requirements
- Voltage: 120 V AC
- Frequency: 60 Hz
- Current: 5.5 A
- Voltage Fluctuation: ±10%
Ultrasonic System
- Frequency: 36 ±2 kHz
- Power: 100 W ±20%
Standards & Compliance
- EMC: IEC 61326:2012, CISPR 11 (Group 1, Class B)
- Electrical Safety: UL 61010-1, CSA C22.2, IEC 61010 series
- Installation Category: II
- Pollution Degree: 2
Refurbished Olympus OER-Pro
Soma Tech Intl offers the Olympus OER-Pro endoscope reprocessor up to 50% below OEM prices, providing the same service and warranty as a new. This automated endoscope reprocessor undergoes both technical and cosmetic refurbishment to ensure dependable performance and a clean, professional appearance. During the refurbishment of the Olympus OER-Pro, our in-house biomedical engineers, who are highly trained and certified to work on endoscope reprocessors, carefully inspect and test the system. If required, components are replaced to ensure the OER-Pro reprocessor meets the original manufacturer’s engineering specifications.
Once the Olympus OER-Pro endoscope reprocessor is fully operational, it proceeds through a detailed cosmetic restoration process. The unit is thoroughly cleaned, signs of wear are addressed, exterior surfaces are refinished when needed, and decals are replaced if necessary. After completing this refurbishment process, the Olympus OER-Pro both functions and presents like new. Soma Tech Intl is ISO 13485:2016 Certified, ensuring strict quality control standards are maintained for all capital medical equipment sold. Before the Olympus OER-Pro is labeled patient-ready and prepared for shipment, it undergoes a final quality assurance inspection to confirm proper operation and consistent performance.
Soma Tech Intl is actively seeking to purchase Olympus OER-Pro endoscope reprocessors. If your facility is interested in selling an OER-Pro or other Olympus endoscope reprocessor systems, contact Soma Tech Intl. Our experienced purchasing department will guide you through the entire process. Selling your used or pre-owned Olympus equipment directly to Soma eliminates the middleman and helps ensure your medical facility receives the highest value for its equipment. Soma is 100% HIPAA compliant, ensuring your equipment arrives at our facility in the same condition it left yours. Soma Tech Intl also offers trade-in credit for your medical equipment. If you have an Olympus OER-Pro endoscope reprocessor or other used medical equipment you would like to sell, send us a message.
