Axia STL4 Imaging Table
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included. Download Specifications
Axia STL4 Features
The Axia STL4 is a mobile imaging table that is intended to support a 500-pound patient. The Axia STL4 is sold new and is intended to be used with mobile X-ray systems for minimally invasive procedures. The STL4 is made in the USA and has 4 table movements. This table is available with 2 different styles of table tops; standard and cervical. The cervical top is 22 inches wide with a fully adjustable headrest.
- Easy c-arm access with diving board-style table top.
- Large patient capacity up to 500 pounds.
- 2-inch thick mattress pad.
- Facial cutout for prone procedures.
- Easy patient transfer with low height.
- Available with a standard or cervical top.
Axia STL4 Specifications
Tabletop Dimensions
- Length: 84” (214.4 cm)
- Width: 24” (61cm)
- Thickness: 1.62″ (4.1 cm)
Radiolucent Dimensions
- Length: 84” (142.2 cm)
- Width: 24” (61cm)
Table Dimensions
- Length: 86” (218.4 cm)
- Width: 26” (66 cm)
Weight
- Table Weight: 590lbs (268kg)
- Patient Capacity: 500lbs (227kg)
Table Movements
- Height: 30” to 40” (76.2 to 101.6 cm)
- Lateral Tilt: ( + / – ) 17º
- Trendelenburg: 13º
- Longitudinal Travel: 10” (+/- 5 “)
General
- Mattress Thickness: 2″ (5 cm)
- Tabletop / Mattress Attenuation: 1.6mm Al. (+/-.2mm tolerance)
- Tabletop Material: Carbon fiber skin/foam core with integral facial cut-out
- Casters: 5″ casters with full swivel and wheel lock
- Steel Base: I-shaped with epoxy finish
- Hand Control: Activates all motions
Power
- 120V/60HZ or 230V/50HZ
- Protect product from moisture
- Allowable Storage & Operating Humidity: 0-92%
- Allowable Storage Temperature: 32°F to 104°F (0°C to 40°C)
- Allowable Operating Temperature: up to 104°F (40°C)