Mindray ePM 10 Features
The Mindray ePM 10 Patient Monitor is a cutting-edge medical device that seamlessly integrates advanced monitoring functionalities, intuitive smartphone-like usability, and a modular design to enhance patient care efficiency and clinical workflow. This monitor features a modular design for advanced monitoring functions like CO2, aiding in the identification of patient deterioration, and comes with integrated parameters including ECG, SpO2, NIBP, respiration, and temperature, ensuring comprehensive monitoring in ambulatory surgical settings.
- Flat touchscreen user interface design
- Large data storage capability for trend data, alarms, events, and 48 hours of full disclosure
- Flexible mounting options for bedside and transportation
- Remote view and alarm watch bed-to-bed allow up to 12 patients to be viewed
- Wireless Monitoring
Mindray ePM 10 Specifications
Dimensions
- Height: 10 in (25.4 cm)
- Width: 9.9 in (25 cm)
- Depth: 6 in (15.2 cm)
- Weight: 9.9 lb (4.5 kg) (standard configuration and recorder, excluding battery, accessories, and modules)
Screen Size ( diagonal )
-
10.1 inches
Resolution
-
1280 x 800 pixels
Speaker
-
Give alarm tones (45 to 85 dB), reminder tones, key tones, and QRS tones; support PITCH TONE and multi-level tone modulation; alarm tones comply with IEC 60601-1-8.
Network connector
-
standard RJ45 connectors, 100 Base-TX, IEEE 802.3
Response time to heart rate change
-
Meets the requirements of IEC 60601-2-27: Clause 201.7.9.2.9.101 b) 5). From 80 to 120 bpm: From 80 to 40 bpm: less than 11 s less than 11 s
Battery type
-
Rechargeable lithium-Ion battery (non-smart battery)
Run time
-
≥ 4 hours when the monitor is powered by a new fully-charged battery at 25 ºC±5 ºC with 5-lead ECG and SpO2 cable connected, auto NIBP measurements at an interval of 15 minutes, and screen brightness set to 1. Shutdown delay: at least 15 minutes after the low battery alarm first occurs.
Number of waveform channels
-
A maximum of 3
Refurbished Mindray ePM 10 Patient Monitor
Soma Tech Intl offers the Mindray ePM 10 patient monitor up to 50% below OEM prices with the same service and warranty as new. Soma Technology technically and cosmetically refurbishes these Mindrays back to the original engineering manufacturer’s specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the Mindray ePM 10 are in working order, the patient monitor is calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Technology not only refurbishes the product, but each unit also goes through a special cosmetic restoration process. The Mindray ePM 10 patient monitor is cleaned and minor scratches and dents are repaired, and decals are replaced if necessary.
Soma Tech Intl also purchases used and pre-owned Mindray ePM 10 patient monitors. If you or your facility wants to sell your Mindray ePM 10, Soma Technology has an experienced purchasing department that makes the process headache and hassle-free. When selling your patient monitors to Soma, there is no need for a middleman, it is a direct transaction to Soma that ensures that you get top dollar for your medical equipment. Soma Technology not only buys patient monitors but also buys a wide variety of different medical equipment if your medical facility is looking to free up space. If you have medical equipment you would like to sell to Soma, send us a message here!
