Mindray Passport 8
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included.
Mindray Passport 8 Features
Providing enhanced efficiency and ingenuity, Passport 8 works for many different levels of patient care. It comes standard with a large 8-inch touchscreen with easy touch function keys and the necessary parameters to meet your clinical needs, such as 3 or 5-lead ECG, NIBP, temperature, SpO2, and respiration. The Passport 8 also includes a plug-and-play modular structure with more advanced monitoring, such as CO2, cardiac output, 2-channel IBP, or a combination of the three.
Integrated HL7 and DIAP communication protocols set the Passport 8 apart. Both wireless and wired network capabilities also provide better connectivity to the DPM Central Station and Panorama Patient Monitoring System. This allows for a continuous flow of patient data and easy sharing when necessary.
- 8” high-resolution touchscreen display
- Up to 7 waveforms
- 3 or 5-lead ECG, SpO2, NiBP, respiration, temperature, an integrated recorder
- Choice of Masimo SET or Nellcor OxiMax SpO2
- Extensive data storage capability for trend data, alarms, events, NiBP measurements, and up to 48 hours of full disclosure
- Available wireless 2.4 GHz (802.11b/g/n)
- Integrated HL7 and DIAP protocol interfaces
- Defibrillator synchronization
- Ergonomic carrying handle and multiple mounting options
Mindray Passport 8 Specifications
Dimensions
- Height: 8.8in (22.4 cm)
- Depth: 5.3 in (13.5 cm)
- Width:9.5 in (24.2 cm)
- Weight: 3.5 kg (7.8 lbs) (Standard parameters configuration, including a lithium battery and a recorder)
Input/Output Communications ECG Analog Output
- Bandwidth (-3dB; reference frequency: 10Hz)
- Diagnostic Mode: 0.05 to 150 Hz
- Monitor Mode: 0.5 to 40 Hz
- Surgical Mode: 1 to 20 Hz
- Monitor QRS Delay: ≤ 25 ms (in diagnostic mode, and non-paced)
- Sensitivity: 1V/mV ±5%
- Pacer Enhancement
- Amplitude: Voh≥2.5V
- Width: 10 ms±5%
- Signal Rising and
- Falling Time: ≤100μs
Electrical Ratings
- Power Supply: AC power, battery
- AC Power: 100 to 240 VAC (±10%)
- Current: 1.3 to 0.5 A
- AC Power Input
- Frequency: 50/60 Hz (±3Hz)
Environmental Conditions
- Temperature Range Operating: 10°C to 40°C
- Temperature Range Non-operating (storage): -20°C to 60°C
- Humidity Range Operating: 15% to 95%, non-condensing
- Humidity Range Non-operating (storage): 10% to 95%, non-condensing
- Altitude Range Operating: -1,000 to 9,841 feet ASL)
-
- 1,074 hPa to 700 hPa
- (806 mmHg to 394 mmHg)
Battery
- Type: Chargeable Lithium-Ion, 11.1DVC, 4.5 Ah
- Number of Batteries: 1
- Run Time: 6 hours when powered by a new fully-charged battery (25°C, SpO2 sensor, and ECG cable connected, Temp cable not connected, Auto NIBP measurements at an interval of 15 minutes
- Charge Time: Less than 3 hours to 90%, and less than 4 hours to 100% when the monitor is off.
- Less than 8 hours to 90%, and less than 12 hours to 100% when the monitor is on.
- Shutdown Delay: at least 20 min (after a low battery alarm first occurs)
Refurbished Mindray Passport 8
Soma Tech Intl offers the Mindray Passport 8 Multiparameter Patient Monitors up to 50% below OEM prices with the same service and warranty as new. Soma Tech technically and cosmetically refurbishes these Mindray Patient Monitors back to the original engineering manufacturer’s specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the Mindray Passport 8 are in working order, the Patient Monitor is calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Technology not only refurbishes the product, but each unit also goes through a Special cosmetic restoration process. The Mindray Passport 8 Multiparameter Monitor is cleaned and minor scratches and dentures are repaired, and decals are replaced if necessary.
Soma Tech Intl also purchases used and pre-owned Patient Monitors. If you or your facility wants to sell your MIndray Multiparameter Patient Monitors, Soma has an experienced purchasing department that makes the process headache and hassle-free. When selling your Multiparameter Monitors system to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma not only buys Patient Monitors but also buys a wide variety of different medical equipment if your medical facility is looking to free up space. If you have medical equipment you would like to sell to soma, send us a message here!