Philips IntelliVue MP50
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included. Download Specifications
Philips Intellivue Features
The Philips IntelliVue MP50 is a patient monitor that offers a flexible screen configuration to view the patient’s vitals. The Philips MP50 can incorporate the Philips Multi-measurement Modules (MMS). With these modules, you can measure 12-lead ECG, arrhythmia analysis, capnography, non-invasive and invasive blood pressure, respiration, cardiac output, temperature, BIS, and SpO2. Along with module configurations that include an anesthesia gas analyzer. The IntelliVue MP50 patient monitor has a 12-inch, touch screen, and color LCD Display that can provide high-resolution waveforms and numeric data. The display can show up to 6 waveforms at once. The Patient Monitor has a user interface that makes IntelliVue fast and easy to operate with color code information and SmartKey. The system can easily be connected to an intra-hospital network via the IntelliVue portal technology, where the patient’s data can be shared with the network Pharmacy, Laboratory, Radiology, and even an ECG management system.
- Intuitive user interface.
- A simple menu hierarchy gives fast access to all basic monitoring tasks.
- Patient data management with tabular and graphic trends.
- Ventilation, hemodynamic, and oxygenation calculations.
- Drug Calculator
- Settings “Profiles” for rapid case turnover.
- Patented automatic alarm limits help clinicians provide care more efficiently.
- Basic Event Surveillance for automatic detection of patient status deterioration.
- Neonatal Event Review keeps a record of the rapidly changing condition of neonatal patients.
- Users can freeze waves on the screen and measure parts of the wave using cursors.
- The bed-to-bed overview provides clinicians with an overview of all the patient beds in their care.
- Users can silence alarms from remote beds.
- Users can assign a monitor and a telemetry device to the same patient. The telemetry data can be displayed as a fixed monitor overview session on the monitor.
- Choice of input devices: touchscreen, navigation point, remote control, mouse, trackball, barcode reader, keyboard, or remote SpeedPoint.
- 12″ TFT flat panel display with SVGA resolution, wide viewing angle, large numerics, permanently visible alarm limits, and up to six real-time waves.
- Capable of functioning in a wireless infrastructure.
- Graphical measurement window shows which measurements are being measured by which device, making it easier to resolve measurement label conflicts.
- The timer application allows you to set timers to notify you when a specific time period has expired.
Intellivue MP50 Specifications
Dimensions
- Height: 12.99″ (33 cm)
- Width: 14.37″ (36.5 cm)
- Depth: 8.54″ (21.7 cm)
- Weight: < 14.8 lbs (8.6 kg)
Display
- Size (Diagonal): 12.1″ (30.73 cm)
- Resoltuion: 800 x 600
- Refresh rate: 60 Hz
- Useful Screen: 9.6″ x 7.2″ (24.6 x 18.4 cm)
- Pixel Size: 0.3075 x 0.3075 mm
Power
- Power Consumption: < 100W
- Line Voltage: 100 to 240 V ~
- Current: 1.6 to 0.7 A
- Frequency: 50/60 Hz
Performance
- Sweep Speed: 6.25, 12.5, 25, and 50 mm/s with ±5% accuracy
- Trends: 12 or 16 numerics @ 12 sec, 1 minute, 5-minute resolution. Multiple choices of number of numerics, resolution, and duration depending on application area
- Neonatal Event Review
- Information: trigger condition and time, event classification and associated detailed view of episode data
- Episode data: configurable, includes all current numerics, alarms and inops, and 4 minutes of high-resolution trend
- Capacity (max): 25 or 50 events for 8 or 24 hours
- Buffered Memory
- Contents: Active settings, trends, snapshots, events, review alarms
- Hold Time: infinite if powered by AC; otherwise at least 48 hours (typical: >72 hours)
Environmental Conditions
- Temperature Range
- Operating: 0 to 35oC (32 to 95oF)
- Non-operating: -20 to 60oC (-4 to 140oF)
- Humidity Range:
- Operating: 20% to 85% Relative Humidity (RH) (noncondensing)
- Non-operating: 5% to 85% Relative Humidity (RH)
- Altitude Range
- Operating: 0 m to 3000 m (10000 ft)
- Non-operating: 0 m to 12000 m (40000 ft)
- BatteryStorage: -20 to 50oC (-4 to 122oF)
Battery
-
- Type: High-power battery M4605A, 10.8 V 6000 mAh Lithium Ion
- Weight: 490 g per battery
- Status LEDs indicate the charge status of batteries
- Safety: complies with UL1642 (UL recognized)
- Electromagnetic compatibility: complies with the requirements for FCC Type B computing Devices, and EN 61000-4-2 and EN 61000-3
- Communication Standard: complies with the SMBus specification v1.1
- Battery Operating Time (New and fully loaded battery)
- With basic monitoring configuration: 5 hours (brightness set to optimum, MMS connected, NBP measurement every 15 minutes)
- With extended monitoring configuration: 4 hours (brightness set to optimum, MMS and MMS extension connected, NBP every 15 minutes, Recorder, Pressure, and Temperature modules connected)
- Battery Charge Time:
- When the monitor is switched off: 4 hours
- When the monitor is in use: 5 to 12 hours, depending on monitor configuration
Refurbished Philips IntelliVue Patient Monitor
Soma Tech Intl offers Refurbished Philips IntelliVue MP50 Patient Monitor up to 50% below OEM prices with the same service and warranty as new. The Philips IntelliVue MP50 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts the MP50 system is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Patient Monitors. If necessary, parts are replaced to make sure that all aspects of the patient monitor are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Philips IntelliVue system is working like new it undergoes a special cosmetic restoration process. The IntelliVue is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Philips Patient Monitor functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Philips IntelliVue MP50 Patient Monitor is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Philips Patient Monitors contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Philips IntelliVue MP50. If you or your facility is looking to sell your Philips, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned IntelliVue Patient Monitor to Soma takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Tech is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain space for new equipment, or if you are looking to upgrade your current equipment, contact Soma Tech Intl’s purchasing department at [email protected] or send us a message on our Sell to Soma website.