Stryker Berchtold Operon D860
24-Hour QuotesPricing up to 50% below the cost of new,
with service and warranty included. Download Specifications
Stryker Berchtold Operon D860 Features
The Stryker Berchtold Operon D860 surgical table, designed to provide exceptional versatility and performance. This advanced table boasts a vertical range from 22.6 inches to 46.4 inches and an impressive lift capacity of 1,250 lb. The Operon D Series features a 21-inch wide patient surface and an integrated X-ray cassette tunnel, eliminating the need for an X-ray top. Constructed with high-strength, lightweight, and X-ray transparent carbon fiber, this table ensures optimal functionality and patient care.
- Easily detachable table sections
- Backlit ergonomic hand pendant
- Self-adjusting hydraulic floor locks
- Backup system with a foot pump and extra emergency hand pendant stored in the lift column
Stryker Berchtold Operon D860 Specifications
Dimensions
- Height: 22.6 – 46.4 in (57.4 – 117.8 cm)
- Width (with side rails): 23 in (58.4 cm)
- Table Top Length: 82.6 in (209.8 cm)
- Weight: 606 – 725 lb (275 – 329 kg)
General
- Maximum Patient Lift: 1,250 lb (566.9 kg)
- Maximum Weight For Full Articulation: 1,000 lb (453.5 kg)
- X-ray channel: Full length of table
Movements
- Longitudinal Slide: 16.9 in (42.9 cm)
- Height Range: 22.6 – 46.4 in (57.4 – 117.8 cm)
- Trendelenburg/Reverse Trendelenburg: 30°/30°
- Tilt Left/Right: 20°/20°
- Back Up/Down: 90°/–45°
- Leg Up/Down: 30°/–105°
- Split Leg Up/Down: 30°/–90°
- Head Rest Up/Down: 45°/–90°
- Kidney Elevator: 3″
- Flex (Auto Position): 225°
- Chair (Auto Position): Back 90° / Trendelenburg 30° / Leg plate -105°
Table Top Dimensions
- Table Top Width (without side rails): 21 in (53.3 cm)
- Table Top Length (with head section): 82.6 in (209.8 cm)
- Lateral Imaging Window: 18.3 in (46.4 cm)
- Imaging Length Full Slide to Head: 40 in (101.6 cm)
- Imaging Length Full Slide to Leg: 40 in (101.6 cm)
Types of Supported Surgical Procedures
- Thoracic / Opthalmology
- Vascular
- Bariatric
- Orthopedic
- Traumatology / Robotics
- Spine Frame / Split Legs
Refurbished Stryker Berchtold Operon D860
Soma Tech Intl offers the Stryker Berchtold Operon D860 up to 50% below OEM prices with the same service and warranty as new. The Stryker Operon D860 is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts on the surgical table, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on surgical tables. If necessary, parts are replaced to make sure that all aspects of the Stryker table are the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the D860 surgical table is working like new it undergoes a special cosmetic restoration process. The Operon D Series table is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Berchtold Operon D860 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished surgical tables contact soma at [email protected] or call us at 1-800-438-7662.
Soma Tech Intl is actively looking to purchase Stryker Berchtold Operon D860 surgical tables. If you or your facility is looking to sell your Stryker Operon surgical tables, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned surgical tables to Soma takes out the middleman in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!