Philips Respironics Trilogy EV300

Quotes in less than 24 hours Download Specifications

Philips Respironics Trilogy EV300 Features

The Philips Respironics Trilogy EV300 is a portable ventilator that can provide both non-invasive (NIV) and invasive(IV) forms of ventilation for the patient. The Trilogy EV300 is designed for easy operation with an 8-inch touchscreen display, per-configured settings, and an easy-to-navigate menu. The Ventilation system was designed to provide adjustable ventilation therapy for patients, making it customizable for the needs of each patient. With a 15-hour battery life, the ventilator can easily be transported with the patient through the various departments of your facility. The Philips Ventilator system can provide monitoring for preset modes such as AVAPS-AU, SpO2, and EtCO2. The adaptability and flexibility of the Philips System make it easy to be used on a wide range of patients ranging from infants to adults.

  • Portable design makes it easy to maneuvor
  • Easy-to-use operation with pre-configured settings and intuitive menu navigation
  • 8-inch touchscreen display
  • Adjustable respiratory monitoring to optimize the patient’s therapy
  • Individual ventilation modes that fit each patient’s needs
  • Offers 15 hours of battery life with bother an internal and detachable battery

Specifications of The Philips Respironics Trilogy EV300

Dimensions with Oxyen Blender

  • Height: 9.65 in (24.5 cm)
  • Width: 11.25 in (28.6 cm)
  • Depth: 7.6 in (19.3 cm)
  • Weight:
    • 12.7 lb (5.8 kg) with detachable battery
    • 13.8 lb (6.3 kg) with oxygen blender and detachable battery


  • Screen dimensions: 8 in (20.32 cm)
  • Ingress protection: IP22: protection against finger-sized objects and protected against dripping water when tilted up to 15 degrees.

Ventilation Modes

  • A/C-PC: Assist control (pressure control)
  • A/C-VC: Assist control (volume control)
  • CPAP: Continuous positive airway pressure
  • PSV: Pressure support ventilation
  • S/T: Spontaneous/timed ventilation
  • SIMV-PC: Synchronized intermittent mandatory ventilation (pressure control)
  • SIMV-VC: Synchronized intermittent mandatory ventilation (volume control)


  • Low flow: 0 to 30 l/min; maximum 10 psi
  • High presure: 280 to 600 kPa (41 to 87 psi)


  • AC input voltage 100V – 240V, 50/60 Hz, 1.7 – 0.6A
  • DC input voltage 12/24V 6.5A
  • Internal and detachable Li-ion batteries 15 hours’ nominal total run time per method in IEC 80601-2-72 (7.5 hours each battery)
  • Charge time for detachable and internal battery from 0% to 80%: 2.5 hours from 0% to 100%: 3.5 hours

Measured and displayed patient parameters

  • Tidal volume (Vti or Vte) 0 to 2000 ml
  • Minute ventilation (MinVent) 0 to 30 l/min
  • Leak 0 to 200 l/min
  • Respiratory rate (RR) 0 to 90 BPM
  • Peak inspiratory flow (PIF) 0 to 200 l/min
  • Peak inspiratory pressure (PIP) 0 to 90 cmH2O
  • Mean airway pressure 0 to 90 cmH2O
  • Percentage spontaneous triggered breaths (%Spont Trig) 0 to 100%
  • I:E ratio 9.9:1 to 1:9.9
  • Dynamic compliance (Dyn C) 1 to 100 ml/cmH2O
  • Dynamic resistance (Dyn R) 5 to 200 cmH2O/l/sec
  • Dynamic plateau pressure (Dyn Pplat) 0 to 90 cmH2O
  • Auto-PEEP 0 to 20 cmH2O
  • FiO2 with FiO2 sensor 21% to 100%
  • SpO2 with pulse oximeter accessory 0 to 100%
  • Pulse rate with pulse oximeter accessory 18 to 321 beats per minute
  • EtCO2 with CO2 accessory 0 to 150 mmHg

Refurbished Philips Respironics Trilogy EV300 Ventilator Systems

Soma Tech Intl offers the Philips Respironics Trilogy ventilator up to 50% below OEM prices with the same service and warranty as new. Soma Technology technically and cosmetically refurbishes these Respironics Trilogy back to the original engineering manufacturer specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the Trilogy ventilator are in working order, the ventilator is calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Technology not only refurbished the product, but each unit also goes through a special cosmetic restoration process. The trilogy ventilator is cleaned and minor scratches and dents are repaired, and decals are replaced if necessary.

Soma Tech Intl also purchases used and pre-owned Philips Respironics Trilogy ventilators. If you or your facility wants to sell your Respironics Trilogy, Soma Technology has an experienced purchasing department that makes the process headache and hassle-free. When selling your ventilator system to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech not only buys ventilators but also would buy a wide variety of different medical equipment if your medical facility is looking to free up space. If you have medical equipment you would like to sell to soma, send us a message here!


Questions about our ventilators?

Soma Tech Intl offers a wide range of ventilators. If you have any questions about any of our ventilators or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your ventilators? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

Contact Us