Physio-Control Lifepak 500 Features
The Physio-Control Lifepak 500 is a portable, battery-powered automated external defibrillator. Once the Electrode pads are attached to the patient, the defibrillation system can evaluate the heart rhythm and detect if a shock is needed. The Physio-Control Lifepak 500 comes in both Monophasic and biphasic modes. The Lifepak 500 is an AED that offers both vocal and visual step-by-step instructions on how to use the defibrillator. The two-button operation system makes it easy to use, with an on/off button and a shock button. Like most defibrillators, the Lifepak 500 runs a self-test every 24 hours making sure the system is running properly and is ready when needed.
- Simple 2 or 3-button operation
- Low maintenance
- Durable
- Powerful
- User-friendly
Physio-Control Lifepak 500 Specifications
Dimensions
- Height: 4” (10.2 cm)
- Width: 10.5” (26.7 cm)
- Depth: 11.6” (29.5 cm)
- Weight: Monophasic: 6.2 lbs (2.8kg); Biphasic: 5.3 lbs (2.4 kg) (Without batteries)
Defibrillator
- Input: ECG via QUIK-COMBO or FAST-PATCH disposable electrodes. Standard placement (anterior – lateral).
- Electrical Protection: Input protected against high voltage defibrillator per IEC 60601/EN 60601.
- Waveform: Monophasic pulse (Edmark) per AAMI DF2-1989, 3.2.1.5.1. Biphasic truncated exponential, with voltage and duration compensation for patient impedance.
- Output Energy Sequence: Monophasic: 200, 200, 360 joules (360 joules thereafter) or 200, 300, 360 joules (360 joules thereafter).
- Biphasic: three levels, user configurable from 200 to 360 joules, delivered (level 1, level 2, level 3, level 3 …).
- Charge time: With a new, non-rechargeable battery pack, or a new fully charged rechargeable battery pack: 200 joules in less than 9 seconds, 360 joules in less than 15 seconds.
- Controls: ON/OFF – turns device power on or off. ANALYZE (optional) – starts ECG analysis. SHOCK – delivers defibrillation energy. Active only when the shock advisory system advises defibrillation.
- Clock Set: Two switches are provided to set the clock.
- Display: Two-line, 20-character per line dot matrix liquid crystal display.
- Low Battery Indicator: Low battery icon: at least 11 discharges remaining with a non-rechargeable battery pack. At least 6 discharges remain with the rechargeable battery pack.
- Service Indicator: Service icon.
- Displayed Messages: Prompt user through the complete operating sequence.
- Audible Tones: Coded tones assist the user through device operation and alert the operator of display messages.
- Voice Prompts: prompt the user through the complete operation sequence.
Event Documentation
- Type: Internal digital memory.
- Memory Capacity: 20 minutes audio recording (optional). ECG and event log of operator/device
- Actions: At least 20 minutes if the unit is configured with audio recording and the audio recording setup option is ON. At least 80 minutes if configured with audio recording and the setup option is OFF. At least 60 minutes if not configured with audio recording.
- Report type: CODE SUMMARY report, Event Log report, and Test Log report.
- Capacity: 300 Event log events. 30 Test Log device tests (assuming no fault codes).
- Data Review: LIFENET system compatible.
Batteries
- Rechargeable SLA Battery Pak – Type: Sealed lead-acid, 8V, and 2.5 amp hours.
- Capacity: Typical: 59 full discharges or 3 hours of ON time with a new fully charged battery.
- Minimum: 43 full discharges with a new, fully charged battery.
- Battery Charge Time: 10 ± 1 hour. Battery charging is limited to +15° to +35°C (+59° to +95°F).
- Recommended Replacement Interval: 2 years or 200 battery charge/discharge cycles, whichever comes first using recommended battery maintenance procedures.
- Weight: 1.9 lbs (0.9kg).
- Non-rechargeable Lithium Battery Pak – Type: sealed lithium, 12V, and 7.5 amp-hours.
- Capacity: typical: 312 full discharges or 14 hours of ON time.
- Minimum: 230 full discharges with a new battery.
- Shelf life: 5 years (4 years for aircraft use).
- Weight: 1.2 lbs (0.5 kg)
Environmental
-
- Operating Temperature: 0° to 50°C (+32° to +122°F).
- Storage Temperature: -30° to +65°C (-22° to +149°F) without battery and electrodes. -30° to +65°C (-22° to +149°F) with battery and electrodes, maximum exposure time limited to one week.
- Atmospheric Pressure: 760 to 429mmHg (0 to +15,000 ft above sea level).
- Relative Humidity: 10 to 95% (non-condensing).
- Water Resistance: IEC 60529/EN 60529 IPX4 “Splash-proof” with electrodes or connector cover installed.
- Shock: MIL-STD-810E, Method 516.4, Procedure 1 (40g, 6–9ms pulse, 1/2 sine each axis).
- Vibration: MIL-STD-810E, Method 514.4, Helicopter—Category 6 (3.75 g rms) and Ground Mobile—Category 8 (3.15 g rms).
RTCA/DO-160C, Table 8–2 Fixed Wing—Turbojet Engine Classification C’ (Fuselage). Test level per Figure 8–5 C’. One hour in each of the three axes.
- Aircraft: RTCA/DO-160D, “Environmental Conditions and Test Procedures for Airborne Equipment,” Section 21, Category M, (Radiated Emissions).
Refurbished Physio-Control Lifepak 500 AED
Soma Tech Intl offers refurbished Physio-Control Lifepak 500 up to 50% below OEM prices with the same service and warranty as new. The Lifepak 500 AED is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the AED, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on Physio-Control Lifepak 500. If necessary, parts are replaced to make sure that all aspects of the AED are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the AED System is working like new it undergoes a special cosmetic restoration process. The Physio-Control Lifepak automatic external defibrillator is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Lifepak 500 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Physio-Control AED contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl is also actively looking to purchase a Physio-Control Lifepak 500 AEDs. If you or your facility is looking to sell your AED, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Physio-Control Lifepak 500 to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!
