Mindray Datascope Gas Module 3 Features
The Mindray Datascope Gas Module 3 is a companion to several patient monitors. The Gas Module 3, commonly called the Datascope GM3, is capable of automatically identifying and measuring five anesthetic agents (Desflurane, Enflurane, Sevoflurane, Halothane, and Isoflurane, as well as N20, CO2, and O2. This unit monitors all gases via sidestream sampling.
- 200 mL/min sample flow rate for adult/pediatric water trap, and 120 mL/min with neonatal water trap.
- Uses a non-dispersive infrared analyzer to measure the absorption of the gas sample at seven infrared wavelengths.
- 2.5-second sampling delay
- Water trap that removes water and impurities from the patient sample.
- Analyzes patient samples at a fixed rate.
Mindray Datascope Gas Module 3 Specifications
Dimensions
- Height: 3” (7.63 cm)
- Width: 11.9” (30.16 cm)
- Depth: 10.4” (26.35 cm)
- Weight: 6.2 lb (2.8 kg)
Performance
- Technology: NDIR-type gas analyzer measuring at 3.9 – 12.8 µm with a paramagnetic oxygen sensor. Pressure, temperature, and full spectral interference correction.
- Operating modes: Startup; ISO accuracy; Full accuracy
- Measured gases: CO2, N2O, O2, HAL, ENF, ISO, SEV, DES
- Measured parameters: Momentary gas concentration; Inspired and expired concentrations of all gases; Breath rate
- Resolution: CO2 and agents: 0.01%; O2 and N2O: 0.1%
- Warm-up Time: ISO accuracy within 45 s, full accuracy within 10 min
- ISO Accuracy Specifications
- As Full Accuracy Specifications, but de-rated as follows:
- Add ± 0.3% ABS to inaccuracy for CO2
- Add ± 8% REL to inaccuracy for all Agents
- N2O inaccuracy is ± (8% REL + 2% ABS)
- O2 no addition
- As Full Accuracy Specifications, but de-rated as follows:
Pneumatic
- Technology: Side-stream gas sampling
- Pneumatic Modes: Room air reference measurement: Automatic; Sampling system purge: Automatic
- Pump: Flow controlled dual membrane
- Gas sampling rate: with DRYLINE™ Water Trap, Adult/Ped: 200 ml/min; with DRYLINE™ Water Trap, Neonate: 120 ml/min
- Occlusion Alarm: Actual flow < 40 ml/min
- Room Air Reference Measurement: Automatic when gas measurement bench temperature change is > 1°C or time since the last ref. measurement is > 4 h
- Reference Measurement Interval: ISO Accuracy Mode > 30 s Full Accuracy Mode > 4h
- Reference Measurement Duration: Typical 5 s, Max 9 s
- Purge Cycle: Automatic when occlusion detected
Environment Conditions
- Transport and Storage Temperature: -40 °C to +70 °C
- Transport and Storage Humidity: 5 to 100%, condensing1
- Operating Temperature: 10 °C to 40 °C
- Operating Humidity: 10 to 95% RH, non-condensing (in Airway: 0-100% RH, condensing)
- Operating Altitude: Sea Level to 8,000 feet
Refurbished Mindray Datascope Gas Module 3
Soma Tech Intl offers Mindray Datascope Gas Module 3 up to 50% below OEM prices with the same service and warranty as new. The Mindray Datascope Gas Module 3 is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Mindray Datascope Gas Module 3, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on agent monitors. If necessary, parts are replaced to make sure that all aspects of the Mindray Datascope Gas Module 3 are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Mindray Datascope Gas Module 3 is working like new it undergoes a special cosmetic restoration process. The Mindray Datascope Gas Module 3 is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Mindray Datascope Gas Module 3 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy a refurbished GE SAM Gas Module contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Tech Intl also purchases used and pre-owned Mindray Datascope Gas Module 3. If you or your facility wants to sell your surgical tables, Soma Tech Intl has an experienced purchasing department that makes the process headache and hassle-free. When selling your Mindray Datascope Gas Module 3 to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech Intl not only buys surgical tables but also buys a wide variety of different medical equipment if your medical facility is looking to free up space. If you have medical equipment you would like to sell to Soma, send us a message here!
