Axia V1500A Touchscreen

Quotes in less than 24 hours Download Specifications

Axia V1500A Patient Monitor Features

The Axia V1500A is a patient Monitor designed for a fast-paced environment like an Emergency Room and ICU. The Axia V1500A comes with a high-resolution 15-inch touch screen making it easy to adapt to every situation. With quick adjustments, the default settings, alarm limits, and the ability to hold up to 72 hours of trending data. The Axia V1500A offers standard measurements including; non-invasive blood pressure, ECG with arrhythmia detection, SpO2, temperature, and respiration rate. Additional measurements can be monitored by adding a plug-in module for End-tidal CO2, anesthesia Agent Measurements, and invasive blood pressure. The Axia Monitor offers a variety of ways to connect the monitor to the facilities’ networking system. Making it easy to Save, store, and transfer the patient’s data when needed.

  • 15-inch touchscreen display.
  • Manage up to 72 hours of detailed patient data.
  • Easily upgradable from a basic vital signs monitor to a continuous bedside monitor, to an operating room monitor while keeping the patient on a single monitor at all times.
  • Offers Ethernet and RS-232 connections with open-source communication protocol.
  • HL7 compliant.

Axia V1500A Patient Monitor Specifications

Applications

  • Neonatal
  • Pediatric
  • Adult patients
  • Anesthetic measurement

General

  • Display: 15-inch color touchscreen
  • Trace: 8 waveforms
  • Indicator: Alarm indicator, Power indicator, QRS beep and alarm sound
  • Trend time: 1 – 72 hour

Recorder

  • Type: Built-in, thermal array, 3 channels
  • Record width: 48mm
  • Recorder paper: 50mm
  • Record speed: 25mm/s, 50mm/s

Networking

  • Industry-standard 802.11b/g wireless network

Power

  • Source: External AC power or internal battery
  • AC Power: 100 ~ 240VAC, 50/60Hz, 150VA
  • Battery: Built-in & rechargeable lithium-ion
  • Operating Time: 3+ hours

Environmental

  • Operating Temperature: 5 ~ 40 °C
  • Storage Temperature: -20 ~ 65 °C
  • Operating Humidity: =80%
  • Storage Humidity: =80%

ECG

  • Input: 5-lead ECG cable and standard AAMI line for connection
  • Lead Choice: I, II, III, aVR, aVF, aVL, V, V1-V6, TEST
  • Gain Choice : x0.5, x1, x2, x4
  • Frequency Characteristic: 0.05 ~ 35 HZ (+3dB)
  • ECG Waveforms: 7 channels
  • Penetration Voltage: 4000VAC 50/60Hz
  • Sweep Speed: 12.5, 25, 50, and 100 mm/sec (left to right or right to left)
  • HR Display Range: 30 ~ 300bpm
  • Accuracy: ±1bpm or ±1%, whichever is greater
  • Alarm Limit Range Setting: Upper limit 10

RESP

  • Measure Method: RA-LL impedance
  • Range: 0 ~ 120 rpm
  • Accuracy: ±3 rpm
  • Alarm Limit Setting: Upper limit 6 ~ 120 rpm,; lower limit 3 ~ 120 rpm
  • Sweep Speed:12.5, 25, 50, and 100 mm/sec (left to right or right to left)

SpO2

  • ASpO2: Anti-motion SpO2
  • SpO2% Range: 0-100%
  • SpO2 Accuracy: ±2% (70 ~ 100%, non-motion); ±3% (70 ~ 100%, motion)
  • Pulse Rate Range: 30-250 bpm
  • Pulse Rate Accuracy: ±2 bpm (non-motion; ±3 bpm (motion)
  • Alarm Limit Setting: Upper limit 70 ~ 100%,; lower limit 70 ~ 100%
  • SpO2 Probe: Red light LED wavelength 660nm±5nm; Infrared light LED wavelength 940nm±10nm

NIBP

  • Measuring Technology: Automatic oscillating measurement
  • Cuff Inflating: <30s (0 ~ 300 mmHg, standard adult cuff)
  • Measuring Period: AVE<40s
  • Mode: Manual, Auto
  • Measuring Interval in AUTO Mode: 2 min ~ 4 hrs
  • Pulse Rate Range: 30 ~ 250 (bpm)
  • Adult/Pediatric Mode: SYS: 40 ~ 250 (mmHg); DIA: 15 ~ 200 (mmHg)
  • Neonatal Mode: SYS: 40 ~ 135 (mmHg); DIA: 15 ~ 100 (mmHg)
  • Maximum Mean error: ±5mmHg
  • Maximum Standard deviation: 8mmHg
  • Resolution: 1mmHg
  • Overpressure Protection: Adult Mode: 300 (mmHg); Neonatal Mode: 160 (mmHg)
  • Alarm Limit Setting: SYS: 50 ~ 240 mmHg
  • DIA: 15 ~ 180 mmHg

TEMP

  • Range: 25 ~ 50 (°C)
  • Accuracy: ± 0.2°C (25.0 ~ 34.9°C); ± 0.1°C (35.0 ~ 39.9°C); ± 0.2°C (40.0 ~ 44.9°C); ± 0.3°C (45.0 ~ 50.0°C)
  • Display Resolution: 0.1°C
  • Alarm Limit Setting: Upper limit 0 ~ 50°C, lower limit 0 ~ 50°C
  • Channel: 2 channels

IBP

  • Measurement Range: -50 ~ 300mmHg
  • Channel: 2 channels
  • Pressure Transducer: Sensitivity, 5µV/V/mmHg
  • Impedance Range: 300 ~ 3000O
  • Transducer Sites: ART, PA, CVP, RAP, LAP, ICP
  • Unit: mmHg/kPa selectable
  • Resolution: 1mmHg
  • Accuracy: ±1mmHg or ±2%, whichever is greater
  • AlarmRange: -10 ~ 300mmHg

EtCO2

  • CO2 Measurement Range: 0 ~ 99mmHg
  • Accuracy: ±2mmHg (0 ~ 38mmHg); 39-99mmHg ±5% of reading +0.08% for every 1mmHg (above 38mmHg)
  • Sampling Rate: 50 ml/min
  • Initialization Time: 30 seconds (typical), reaches ±5% steady-state accuracy within 3 minutes
  • Respiration Rate: 0 ~ 150 breaths
  • Mode: Adult, neonate

C.O. (Cardiac Output)

  • Measurement Method: Thermodilution Method
  • Measurement Range
    • C.O.: 0.1 to 20 L/min
    • TB: 23 to 43?
    • TI: 0 to 27?
  • Resolution
    • C.O.: 0.1 L/min
    • TB, TI 0.1?
  • Accuracy
    • C.O. ±5% or ±0.1 L/min, whichever is greater, as measured using electronically generated flow curves.
    • TB, TI: ±0.1(without sensor)
  • Alarm Range: TB 23 to 43?
  • Repeatability: C.O. ±2% or ±0.1 L/min, whichever is greater, as measured using electronically generated flow curves

Anesthetic Agents

  • Method: Infrared absorption
  • Gas Sorts: Halothane, Isoflurane, Enflurane, Sevoflurane, Desflurane, CO2, N2O, O2 (optional Automatic Agent ID)
  • Measurement Range
    • Halothane, Isoflurane: 0 ~ 8.5%
    • Enflurane, Sevoflurane: 0 ~ 10%
    • Desflurane: 0 ~ 20%
    • CO2: 0 ~ 10%
    • N2O: 0 ~ 100%
    • O2: 0 ~ 100%
  • Bias
    • Halothane, Isoflurane, Enflurane, Sevoflu rane, Desflurane: ±(0.15 Vol% + 15% rel.)
    • CO2: ±(0.5 Vol% + 12% rel.)
    • N2O: ± (2 Vol% + 8% rel.)
    • O2: ±3 Vol%

Other Standard Features

  • OxyCRG
  • Drug dose calculation
  • Cascading ECG
  • On-screen NIPB trends (up to 250 readings)
  • User set defaults
  • Arrhythmia detection
  • ST segment

Refurbished Axia V1500A Touch Screen Monitor

Soma Tech Intl offers the Axia V1500A Touch Screen monitors up to 50% below OEM prices with the same service and warranty as new. Soma technically and cosmetically refurbishes these patient monitors back to the original engineering manufacturer’s specifications. Using highly skilled, trained, and certified in-house biomedical engineers these units are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the Axia V1500A Touch Screen Monitor are in working order, the patient monitor is calibrated back to OEM specifications, to make sure it works exactly the way it did when it originally left the manufacturer. Soma Tech Intl not only refurbished the product, but each unit also goes through a Special cosmetic restoration process. The Axia V1500A Touch Screen is cleaned and minor scratches and dentures are repaired, and decals are replaced if necessary.

Soma Tech Intl also purchases used and pre-owned Patient Monitors. If you or your facility wants to sell your Axia V1500A Touch Screen, Soma Tech Intl has an experienced purchasing department that makes the process headache and hassle-free. When selling your patient monitor to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech Intl not only buys patient monitors but a wide variety of different medical equipment as well if your medical facility is looking to free up space. If you have medical equipment you would like to sell to Soma, send us a message here!

Banner

Questions about our Anesthesia Monitors and Agent Monitors?

Soma Tech Intl offers a wide range of Anesthesia Monitors and Agent Monitors. If you have any questions about any of our monitors or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your Anesthesia Monitors and Agent Monitors? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us