Stryker LD304 Birthing Bed

Quotes in less than 24 hours Download Specifications

Stryker LD304 Birthing Bed

The Stryker LD304 Birthing Bed provides comfort and security for both the mother and caregivers. This birthing bed is simple to operate and mobile, and it’s designed to provide safety while bringing comfort to mothers in labor. Convenient controls provide the Stryker birthing bed to get into trend positions with a single button, these options make it easy to customize the positions for minimum effort.

The Stryker foot section promotes proper body mechanics to help prevent caregiver back strain or injury. The Stryker Birthing Bed features the patented Skoocher, which moves the patient or mother closer to the perineal edge of the bed with the touch of a button. This is a very secure and comfortable bed for mothers and caregivers alike, and its simple operation, mobility, and ergonomic features are all you’re looking for in a birthing bed.

  • Lock-Rite slide-off foot section
  • Lightweight, self-standing foot section
  • Glideaway foot supports with six-way adjustability
  • Single-button Trend.
  • Three-position side rails
  • In-rail motion controls with lockout
  • 17.5-inch (44 cm) low bed height
  • 5-inch (13 cm) Ultra Comfort head and a seat support surface
  • 3-inch (8 cm) foot mattress
  • 6-inch (15 cm) Omni Surface casters with wheel covers
  • Locking-caster steering
  • Four-wheel, steel-ring brake system with centrally located activation pedal
  • 33-inch (84 cm) mattress width with four motor functions (head, bed, foot, Trend.)
  • Automatic pelvic tilt
  • CPR release
  • Manual backup
  • Self-storing labor grips
  • Plastic fluid basin
  • Under-bed night light
  • Wood headboard
  • Permanent folding three-stage IV pole

Stryker LD304 Birthing BedSpecifications

Overall length

  • 93” (236 cm)

Overall Width

  • Siderails: Up 41” (104 cm)
  • Siderails: Down 37” (94 cm)

Lift Capacity

  • Bed: 500 lbs (228 cm)
  • Head Section: 250lbs (114 cm)
  • Foot Section: 300lbs (136 cm)

Height Range (to litter top)

  • High: 35.5″ (90 cm)
  • Low: 17.5″ (44 cm)

Litter Positioning

  • Backrest: 0° – 70°
  • Pelvic Tilt: 4°
  • Maximum Trend

Patient Surface

  • 33″ x 81″ (84cm x 206 cm)

Mattress Thickness

  • Head/Seat: 5″ (13 cm)
  • Foot: 3″ (8cm)

Seat Depth

  • Standard: 12.5″ (32 cm)
  • With Skoocher: 2.5″ – 8.5″ (32 – 22cm)

Caster Diameter

  • Standard: 6″ (15 cm)
  • Optional: 18″ (20cm)

Refurbished Stryker LD304 Birthing Bed

Soma Tech Intl offers Stryker LD304 Birthing Bed up to 50% below OEM prices with the same service and warranty as new. The Stryker LD304 Birthing Bed is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the Stryker LD304 Birthing Bed, it is carefully inspected and tested by our own in-house biomedical engineers who are highly skilled and certified to work on beds. If necessary, parts are replaced to make sure that all aspects of the Stryker LD304 Birthing Bed are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Stryker LD304 Birthing Bed is working like new it undergoes a special cosmetic restoration process. The Stryker LD304 Birthing Bed is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the Unit functions and looks like new. Soma Tech Intl is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Stryker LD304 Birthing Bed is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Stryker LD304 Birthing Bed contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase a Stryker LD304 Birthing Bed. If you or your facility is looking to sell your Stryker LD304 BirthingBed, be sure to contact Soma Tech Intl. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Stryker LD304 Birthing Bed to Soma Tech Intl takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Tech Intl also gives the option for trade-in credit on your medical equipment. If you have medical equipment you would like to sell to Soma, send us a message here!

Banner

Questions about our Beds and Med/Surg Beds?

Soma Tech Intl offers a wide range of  MedSurg Beds. If you have any questions about any of our beds or need a quick quote, call us and one of our knowledgeable sales representatives will help you.

Looking to sell your beds? Soma ensures your facility gets top dollar for your equipment and also gives the option for trade-in credit.

1-800-GET-SOMA
Contact Us