Zoll R Series - ALS/BLS Zoll Models

Zoll R Series Defibrillator - Soma Tech Intl

click on thumbnail to zoom

Other products by Zoll
Other products in Defibrillators

R Series Features

The Zoll R Series is a defibrillator and monitor that can provide CPR, defibrillation, and pacing therapies. The Zoll R is not just known as being a defibrillator it offers 3-lead ECG, pacing, end-tide Co2, Non-invasive Blood Pressure (NIBP), and SpO2 Monitoring. With wireless connectivity, the R Series defibrillator can give health providers a quick overall snapshot of the patient's health via a pc or mobile device. With a color display screen, you can view the CPR dashboard which can show depth, rate, and visual indicator of compression releases.

Always Code-Ready
Remote viewing and administration from PC or mobile device
History of readiness logs for the Joint Commission
Readiness check includes defib, pacing, and ECG modules; AC power; battery; 30-joule shock test; electrodes attached and not expired
Customizable dashboard

Zoll Defibrillator R Series Specifications

Dimensions

Height: 8.2” (20.8 cm)
Width: 10.5” (26.7 cm)
Depth: 12.5” (31.7 cm)
Weight: 15.2 lbs (6.9 kg)

Power

Voltage: 100-120 V AC
Frequency: 50/60 Hz
Battery: Rechargeable Lithium-Ion battery pack

Defibrillator

Waveform: Rectilinear Biphasic
Patient Impedance Range: 15 to 300 ohms
Energy Selections: 1 to 10, 15, 20, 30, 50, 75, 100, 120, 150, and 200 joules selected using controls on front of the defibrillator or sternum paddles. (Note: When using appropriate pediatric resuscitation electrodes, the 75-joule setting is replaced by 70- and 85-joule settings.)
Smart Step Energy Levels: Automatically escalates energy through a configured adult or pediatric protocol
Energy Display: Shown on the monitor for both selected and delivered
Charge Time: Less than 7 seconds with a new, fully charged battery (first 15 charges to 200 joules); longer charge times may result with a depleted or older battery
Synchronized Mode: Synchronizes defibrillator pulse to patient’s R wave. “SYNC” message displayed on monitor and markers shown on both monitor and recorded ECG
Charge Controls: Control from the front of the defibrillator or apex paddle
Paddles: External apex/sternum paddles; adult plates slide off to expose pediatric electrode surface
Code Readiness Testing (OneStep): Verifies defibrillator hardware, therapy delivery cable (with both paddles and electrodes), electrode condition and expiration (with select OneStep electrodes) without the need for a separate test fixture.

ECG Monitoring

Patient Connection: 3-lead ECG cable, 5-lead ECG cable, paddles, or hands-free electrodes; selectable by the front panel switch
Input Protection: Fully defibrillator protected. Circuits designed to prevent distortion of ECG signal by pacer pulse
Implanted Pacemaker Spike Display: Circuits designed to detect most implanted pacemaker spikes and display a marker on the ECG trace
Bandwidth: 0.5 to 21 Hz (-3dB) standard; 0.05 to 150 Hz diagnostic with configurable options of 0.5 Hz to 40 Hz or 1 Hz to 21 Hz
Lead Selection: I, II, III aVR, aVL, aVF, V, P1, P2, P3 with OneStep Pacing electrode
ECG Size: 0.5, 1.0, 1.5, 2.0 or 3.0 cm/mV display on monitor
Heart Rate Display: 0 to 300 bpm ±5%
Heart Rate Alarm: User selectable for tachycardia at 60 to 280 bpm; for bradycardia at 20 to 100 bpm. On/Off status displayed on the screen.

Display

Screen Type: Color, VGA liquid crystal display (LCD)
Screen Size: 6.5 inches (16.5 cm) diagonally
Sweep Speed: 25 mm/sec
Viewing Time: 5 seconds with the standard display format
Channels: 3
Information: Heart Rate, Leads/Pads, Alarm On/Off, Selected Energy, Delivered Energy, User Prompts and Warnings, Code Readiness Test Results, SpO2, NIBP, EtCO2, Pacer Functions, Code Markers, CPR Dashboard

Battery Packs

Type: 10.8 V (nominal) rechargeable lithium ion
Capacity: 5.8 amp hours
Weight: 1.7 lb (0.77 kg)
Recharge Time: 5 hours or less with integral charger
Operating Time: >4 hours of continuous ECG monitoring; 100 maximal energy (200 joules) discharges; 3.5 hours of continuous ECG monitoring and pacing at 60 mA, 80 ppm

Recorder

Technology: 90 mm thermal array; 80 mm grid width
Speed: 25 mm/sec, 6-second delay
Printing Modes: Manual or automatic
Annotations: Time, date, defibrillation energy, patient impedance, heart rate, pacer output, QRS synchronization marker, ECG size, ECG lead, alarm, defibrillator test results, analyze ECG, ECG bandwidth

External Pacing

Type: VVI demand; asynchronous (fixed rate) when used without ECG leads or in asynchronous (ASYNC) pacing mode
Pulse: Rectilinear, constant current: 40 ms ±2 ms; variable 0 to 140 mA ±5% or 5 mA, whichever is greater. The rate is variable from 30 to 180 ppm ±1.5%
Output Protection: Fully defibrillator protected and isolated
OneStep Pacing: Eliminates the need to connect separate ECG leads when used in conjunction with OneStep Pacing and OneStep Complete electrodes.

Pulse Oximetry with Masimo SET Technology

Saturation Range: 1-100% (%SpO2 ) with a resolution of 1%
Pulse Rate Range: 25-240 ppm with a resolution of 1 ppm
Saturation Accuracy: Non-motion conditions ±2% for adults/pediatrics; ±3% for neonates. During motion ±3% for all patients
Pulse Rate Accuracy: Non-motion conditions ±3 ppm. During motion ±5 ppm.

Mainstream CO2 Capnostat 5 Sensor

Principle of Operation: Nondispersive infrared (NDIR) single-beam optics, dual wavelength, no moving parts
Warm-up Time: Full specifications within 2 minutes at an ambient temperature of 25°C. Capnogram in 20 seconds
Environmental: Operating Temperature: 0°C to 45°C, Storage and Shipping Temperature: -40°C to 70°C.

Sidestream CO2 LoFlo Sensor

Principle of Operation: Nondispersive infrared (NDIR) single-beam optics, dual wavelength, no moving parts
Warm-Up Time: Full specifications within 2 minutes at an ambient temperature of 25ºC. Capnogram in 20 seconds
Environmental: Operating Temperature: 0°C to 40°C, Storage and Shipping Temperature: -40°C to 70°C.

NIBP

Patient Population: Adult, Pediatric
Method: Oscillometric
Control: Automatic and manual measurement.

WiFi Capable

WiFi 802.11 a/b/g/n Ambicom-specific 1100C-CF Card P/N 8005-000101-01 compatibility
Typical Readiness File: 750K
Typical Code Data File: 1.2 MB.

General Information About Defibrillators, AED, and CPR

Why Defibrillation?

Sudden Cardiac Arrest (SCR)-Rapid irregular rhythm causing heart to quiver
Cause: Ventricular Fibrillation (VF)
- Can lead to death if emergency shock not delivered
Defibrillation – to counteract fibrillation

Defibrillator

Device used to administer an electric current (shock) to the heart
Types of Defibrillators
- Manual external
- Manual Internal
- Automated External (AED)
- Semi-Automated External
- Implantable Cardioverter-Defibrillator (ICD)

Manual External Defibrillator

Widely used in Hospitals and clinics
Inbuilt EKG reader
Clinician Diagnoses the condition and accordingly administers the shock through paddles or pads

Manual Internal Defibrillator

Exclusively used in Operation Theatres
Charge delivered through internal paddles in direct contact with the heart

Automated External Defibrillator (AED)

Used by lay persons requiring little training
Built in heart rhythm analyzer
Advices whether shock is required

Semi-Automated External Defibrillators

Used by paramedics and emergency medical technicians
Automated capabilities of AED
With ECG display and manual over ride option

Implantable Cardioverter Defibrillator

Implants similar to pacemakers
Constantly monitor heart rhythm
Automatically administers shock for arrhythmias

Types of waveform - Shape of defibrillation current

Monophasic damped sine waveform – delivers energy in one direction
- Relies on adjustment of joule settings
Biphasic damped sine waveform – bi-directional current flow
- Measures impedance of patient and delivers precise dose of electricity
- Uses significantly low energy levels
- Decreases risk of burn in Myocardial damage

Refurbished Zoll Defibrillators

Soma Tech Intl offers the Zoll R Series Defibrillators up to 50% below OEM prices with the same service and warranty as new. Soma Tech technically and cosmetically refurbishes these R Series back to the original engineering manufacturer specifications. Using highly skilled, trained, and certified in-house biomedical engineers these R Series are fully tested, disassembled, and if necessary, parts are replaced. Once all the parts of the R Series are in working order, the R Series units are calibrated back to OEM specifications. This ensures the R Series works exactly the way it did when it originally left the manufacturer. Soma Tech not only technically refurbishes the R Series, but each unit also goes through a special cosmetic restoration process. The R Series is cleaned and minor scratches and dents are repaired, and decals are replaced if necessary.

Soma Tech Intl. also, purchases used and pre-owned Zoll R Defibrillators. If you or your facility wants to sell your defibrillators, Soma Tech has an experienced purchasing department that makes the process headache and hassle-free. When selling your R Series to Soma, there is no need for a middle man, it is a direct transaction to Soma which ensures that you get top dollar for your medical equipment. Soma Tech Intl not only buys R Series defibrillators but also would buy a wide variety of different medical equipment if your medical facility is looking to free up space. If you have medical equipment you would like to sell to soma, send us a message here!

Questions about our Defibrillators?

Soma Tech Intl offers a wide range of defibrillators. If you have any questions about any of our defibrillators or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.