Boston Scientific Endostat III Features
The Endostat III Electrosurgical Generator is a self-timing energy system that is designed to limit the depth of burn penetration.
Two Bipolar Modes: Continuous or variable time, designed to vary the duration of energy delivery. The monopolar capabilities of the Endostat III generator are intended to provide physicians the ability to perform certain therapeutic procedures using standard monopolar devices such as polypectomy snares, sphincterotomes, and hot biopsy forceps.
The Endostat III
features a new safety standard that utilizes two separate warning systems intended to help identify the cause of a problem and prevent surgical error. The “pad fault” warning system is designed to detect a poor connection between the generator and the pad or between the pad and the patient. In the event of a fault, the RF power is designed to be inhibited until the connection is corrected.
- A self-limiting energy system that is designed to limit the depth of burn penetration.
- A variable speed peristaltic pump intended to provide precisely controlled irrigation.
- Two bipolar modes: CONTINUOUS or VARIABLE TIME, are designed to vary the duration of energy delivery.
- The monopolar capabilities of the Endostat III Generator are intended to provide physicians the ability to perform certain therapeutic procedures using standard monopolar devices such as polypectomy snares, sphincterotomes, and hot biopsy forceps.
- A choice of four individual RF waveforms: COAG, BLEND, CONTROL CUT, or CUT.
- Receptacles that accept widely used monopolar active cords and disposable dispersive electrodes (patient plates, or grounding pads).
- CONTROL CUT mode is designed to allow the operator to cut in increments by cycling the output power off and on at a predetermined rate
- Pad contact monitoring circuit is intended to provide enhanced procedural safety by monitoring contact between the patient and the pad
- Dual capability design is engineered to permit monopolar or bipolar energy
- Integrated variable-speed E-Z Load peristaltic pump is designed to produce irrigation flow to assist in clearing bleeding sites
Boston Scientific Endostat III Specifications
Dimensions
- Height: 22 in (55 cm)
- Width: 14 in (35 cm)
- Depth: 12 in (30 cm)
- Weight: 20 lb
Power
- 115 V / 60 Hz.
Refurbished Boston Scientific Endostat III Electrosurgical Generator
Soma Technology, Inc. offers a Refurbished Boston Science Endostat III Electrosurgical Generator up to 50% below OEM prices with the same service and warranty as new. The Boston Science Endostat III is not only technically refurbished but also cosmetically refurbished to make it work and look new. When the refurbishing process starts the Endostat II Electrosurgical Generator system is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on Boston Science Endostat III Electrosurgical Generator. If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer’s specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the Endostat III system is working like new it undergoes a special cosmetic restoration process. The electrosurgical generator System is cleaned, minor scratches and dents are repaired, it’s painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the Boston Science electrosurgical Generator System is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished Boston Science contact soma at [email protected] or call us at 1-800-GET-SOMA.
Soma Technology, Inc. is also actively looking to purchase a Boston Science Endostat III Electrosurgical Generator System. If you or your facility is looking to sell your Bostn Science, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned Boston Science Endostat III Electrosurgical Generator System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.
