ERBE APC 300

What is ACP?

Argon plasma coagulation, APC for short, is an electrosurgical, monopolar procedure for superficial hemostasis, devitalization, and ablation using ionized argon gas. Argon is an inert gas and can be easily ionized.

Working with argon plasma coagulation

Using APC
The most effective location for APC ignition is close to tissue. The distance between the applicator tip and tissue during use is approx. 5-15 mm. The coagulation is directly visible on the tissue; movement can be used to determine and easily control the surface distribution and the intensity of the coagulation surface. In literature, usage is sometimes compared to using a paintbrush.

Only use when there is good visibility
APC should only be applied where there is good visibility

Penetration depth and dosage
The penetration depth of APC depends on various factors such as mode, effect, and duration of application. In the case of conventional usage, a penetration depth of approx. 2-3 mm can be assumed.

Avoid tissue contact
Do not place the APCapplicator tip on tissue while activated. Do not allow the gas to enter the vessels or organs.

Distance to metal and surgical suture
To prevent unintended coagulation, do not apply APC to metal clips or surgical suture.

Refurbished ERBE APC 300 Electrosurgical Unit

Soma Tech Intl offers Refurbished ERBE APC 300 Electrosurgical unit System up to 50% below OEM prices with the same service and warranty as new. The ERBE APC 300 Electrosurgical Unit is not only technically refurbished but also cosmetically refurbished to make it work and look like new. When the refurbishing process starts on the ERBE APC300 system is carefully inspected and tested by our own in-house biomedical engineers that are highly skilled and certified to work on ERBE APC 300 Electrosurgical Unit . If necessary, parts are replaced to make sure that all aspects of the pump are functioning properly. Once everything is in working order, the unit is calibrated back to the original engineering manufacturer specifications. This ensures that the unit is working the same way that it originally left the manufacturer. After the ERBE system is working like new it undergoes a special cosmetic restoration process. The ERBE APC 300 Electrosurgical Unit is cleaned, minor scratches and dents are repaired, it's painted, and new decals are replaced if necessary. After this strenuous refurbishing process, the infant warmer functions and looks like new. Soma Technology is ISO 13485 certified and ensures that the best quality is given to all capital medical equipment that they sell. Before the ERBE APC 300 is labeled patient-ready and packed up for shipment, it goes through one last quality control test that makes sure all aspects are again working as they should. If you are looking to buy refurbished ERBE System contact soma at [email protected] or call us at 1-800-GET-SOMA.

Soma Tech Intl is also actively looking to purchase an ERBE APC 300 Electrosurgical Unit System If you or your facility is looking to sell your ERBE APC 300, be sure to contact Soma Technology, Inc. Soma has a dedicated and experienced purchasing department that helps you through the entire process. Selling your used or pre-owned ERBE APC 300 Electrosurgical Unit System to Soma Technology takes out the middle man in the equation. This also ensures that your medical facility gets top dollar for your equipment. Soma Technology is 100% HIPPA compliant and makes sure that your equipment gets to our facility in the same condition that it left yours. Soma Technology also gives the option for trade-in credit on your medical equipment. If you or your facility is looking to regain floor space for new equipment, or looking to upgrade current equipment, contact Soma Technology’s purchasing department at [email protected] or send us a message on our Sell to Soma website.