Drager Air-Shields Resuscitaire RW

The Drager Air-Shields Resuscitaire RW infant warmer combines an effective warming therapy platform along with the components you need for clinical emergency resuscitation. The Drager Resuscitaire offers a blender, suction, flowmeter, and positive pressure mounted on the bed for easy accessibility. It features a Silica Quartz Heater that provides complete, even and quick heating. A parabolic reflector helps distribute the heat evenly over the entire mattress area.

• Exceptional access from either side.
• Configure to your department's needs.
• Easily access suction.
• Efficiently adjust mattress position.
• Head of the warmer module can swivel up to 90 degrees.
• Automatic Pre-Warm Mode allows long-term, controlled warming of the mattress with no nuisance alarms.

Physical Attributes (Without Options / Accessories)

• Height: 72 in (183 cm)
• Width: 26.5 in (68 cm)
• Depth: 44 in (112 cm)
• Weight: (without options /accessories) 220–280 lbs (100–127 kg)

Mattress

• Height From Floor: 39.4 in (100 cm)
• Width: 21.0 in (53.3 cm)
• Length: 26.0 in (66.0 cm)
• Thickness: 1.0 in (2.54 cm)
• Maximum Capacity: 15 lbs (4.54 kg)

Maximum Power Requirements

• Model 120V: 120 V, 50–60 Hz, 750 W
• Model 220/240V: 220–240 V, 50–60 Hz, 750 W )

LED Examination Light

• Illumination: > 0.11 lumens / cm² (100 ft. Candles)

Controller Heating Alarms

• Check patient System alerts for 5 minutes in Manual Mode every 30 seconds after 10 minutes
• Baby temperature ±1° C from Set Point
• High temperature Skin Temp. 39.0 ±0.2 °C
• Probe Short or open circuit / No probe
• System fail Indicates System Fail
• Power fail AC Power Interruption

Alarm Silence / Reset Intervals

• Check patient Resets clock for 10 minutes manual mode
• Baby temperature 10 minutes
• High temperature 2 minutes
• Procedural silence Presilences baby temp alarm for 5 minutes

Set Temperature / Heater Output

• Set Temp Range: 34–38 °C (>37.0° override)
• Heater Output: 0–100%, 10% increments
• Skin Temp Display: 18–43 °C
• Accuracy: ±0.2 °C (31 to 37° C)

Resuscitation Module

• Wall Supply Pressure: 40–75 psi (275–517 kPa)
• Cylinder Pressure: 2,900 psi max (19 994 kPa)

Patient Gas Supply

• Flow Control Range: 0–15 LPM
• Airway Pressure Limit: Adjustable 0–50 cm H2O (0–4.9 kPa); Internal preset limit 60 cm H2O (5.9 kPa)