1.800.GET.SOMA (1.800.438.7662)

Carefusion Alaris BD MedSystem III (2860, 2863, 2865)

Carefusion Alaris BD MedSystem III (2860, 2063, 2865) - Soma Technology, Inc

click on thumbnail to zoom

Other products by Alaris
Other products in Infusion Pumps

Specifications

24 Hour Turn Around Time - The Fastest Turnaround for Medical Equipment

Carefusion Alaris BD MedSystem III (2860, 2863, 2865) Features

The MedSystem III is intended for facilities that utilize infusion pumps for the delivery of fluids, medications, blood and blood products using continuous or intermittent delivery through clinically acceptable routes of administration; such as, intravenous (IV), intra-arterial (IA), subcutaneous, epidural, enteral, or irrigation of fluid spaces.

The MedSystem III is a multi-channel infusion pump intended to deliver multiple infusions to a single patient.

Three independent fluid delivery systems in the space of one
Compact size
Easy to Setup and use, yet provides advanced features
Accommodates assorted container types
Multiple delivery methods
Accurate delivery of a variety of fluids
Uses administration sets that provide free-flow protection
Six available Device Types with configurable parameters (maximum and minimum rates, maximum volumes, baseline and maximum pressures, and air-in-line thresholds) to achieve specific clinical applications
Display infusion status for rate, volume remaining and volume infused.
Infusions can be programmed to deliver at a specified rate or over a specified period of time.
Secondary mode allows fluids and medications to be delivered at two different rates, sequentially.
Dose Rate Calculator (DRC) feature performs volumetric rate and/or dose rate calculations.
With DRC activated, the MedSystem III displays infusion status for rate, dosing regimen and drug name.
Communications Protocol allows clinical monitoring, MedSystem III configuration and maintenance.
Field Maintenance Software (FMS) available for Biomed to configure, service and troubleshoot the MedSystem III.

Carefusion Alaris BD MedSystem III (2860, 2063, 2865) Specifications

Dimensions

Height: 7.875 in (20 cm)
Width: 6 in (15.24 cm)
Depth: 2.10 in (5.33 cm)
Weight: 5.1 lbs (2.3 kg) - including pole clamp

Occlusion Pressure

15 PSI except for controller Pressure device type which is 3ft. H20

Operating Temperature

50 - 104° F (10 - 40° C)

Transport/ Storage Temperature

-4 to 131° F ( -20 to 55° C)

Rate Range

0.1 - 999 milliliter per hour (each channel)

Volume Rage

0.1 - 999 milliliter (each Channel)

KVO Range

0.1 - 20.0 milliliter per hour

Rate Accuracy

1.0 - 999 ml/hr ± 5% with a standard deviation of 1.96 under specified conditions
1.0 - 0.9 ml/hr ± 10% with a standard deviation of 1.96.

Batteries

Main - rechargable Nicid Battery Pack
Memory Backup - Nonrechargeable lithium

Battery Charge

A fully charged battery has a minimum of 6 hours running time with all channels running at 125 milliliters per hour and backlight usage of 2 minutes per hour.
The main battery retains 80% of its capacity after 500 charging cycles, and retains 90% of tis capacity after 3 months of continuous AC charging.

AC Poeer Requirments

Voltage: 90 VAC to 132 VAC
Frequency 47 Hz to 63 Hz

Delivery

The 2865 features a delivery rate range of 0.1 – 999 milliliters/hour for each channel and a KVO rate range of 0.1 – 20.0 milliliters/hour.
The 2863 features a delivery rate range of 0.1 – 999 milliliters/hour for each channel and a KVO rate range of 0.1 – 20.0 milliliters/hour.
The 2860 features a delivery rate range of 0.1 – 999 milliliters/hour for each channel and a KVO rate range of 0.1 – 20.0 milliliters/hour.

Untitled Document

General Information About IV Therapy

IV Therapy

IV therapy is used to deliver by infusion, fluids, medication, or nutrients to patients.
There are two main types of administration of infusion, volumetric and syringe/PCA.

IV Therapy-Volumetric

These pumps are used when the accuracy of fluid volume to be infused is critical such as in the case of medications used for infusion of drugs for circulatory support.

Volumetric pumps deliver a given volume of fluid per unit time measured in mL/hour.

Volumetric pumps can be single or multi channel. Both types allow for the administration of more than one fluid at a time. Single channel employs a piggyback method while multi-channel uses separate tubing set up for the administration of multiple medications or fluids

IV Therapy-Syringe

Syringe pumps are used to administer small volumes of fluids or medications. (1 mL to 60 mL syringe)

Syringe pumps are an effective way to deliver medication with precision while reducing the chance of human error if the medication were to be administered by a member of the medical staff* (of course human error can occur when inputting data or choosing dose rate over time)

Like volumetric pumps, syringe pumps can be programmed to deliver the medication over a predetermined time

Questions about our Infusion Pumps?

Soma Technology, Inc offers a wide range of infusion pumps. If you have any questions about any of our infusion pumps or need a quick quote, call 1-800-GET-SOMA and one of our knowledgeable sales representatives will help you.